MHD simulation of high-current subsonic vacuum arc under different distributed axial magnetic fields

Based on two-temperature magnetic hydrodynamic (MHD) model, the influence of saddle-shaped distributed axial magnetic field (AMF, linearly increases along radial position) and bell-shaped distributed AMF (linearly decreases along radial position) on plasma loss and heat flux density to anode in subsonic high-current vacuum arc (HCVA) is simulated and analyzed. According to the simulation results, the saddle-shaped AMF can more effectively inhibit plasma loss from arc column than that of bell-shaped AMF. Comparisons between simulation results and experimental results further verify the correctness of model and simulation.     

电弧炉采用石灰石单渣冶炼工艺的研究

采用优质石灰石取代质量差的白灰 ,进行了单渣电弧炉熔炼。结果表明 ,钢水成本降低 ,钢水质量提高 ,取得了良好的效果。     

变压器事故原因分析

通过分析一次变压器事故的原因。指出变压器实际运行中存在的问题。并结合自己的工作经验提出科学的改进建议。     

双谱估计在导引头信号检测与处理中的应用

双谱估计是一种应用广泛的高阶谱估计。将双谱估计应用于超宽带导引头信号检测与处理系统中,为导引头信号处理中的平滑和滤波增添了一种新的方法。仿真结果表明该方法是有效的。     

A Novel Segmentation and Feedback Model for Resolving Contention in Optical Burst Switching

A novel segmentation and feedback model (SFM) applied to resolve contention is proposed. Simulation and performance analyses show that the SFM effectively avoids contentions in optical burst switching (OBS). The long delay time of deflection routing and the immature technology of wavelength converters and optical buffers are not deployed in the SFM. The SFM does not only realize fast switching but also allows preemption by higher priority bursts.     

钻机绞车滚筒体的窄间隙埋弧焊

针对钻机绞车滚筒体采用手工电弧焊工人劳动强度大、焊接效率低、质量不稳定及返修率高等问题,研制了钻机绞车滚筒体窄间隙埋弧焊专机。该专机由ESAB—A2埋弧焊电源和焊接小车、窄间隙焊头、滚轮架、防窜装置、旋转地线夹、三维焊接工作台、焊剂自动回收机组成。使用表明,采用该焊机焊接的滚筒体焊缝质量完全符合设计要求,合格率100%,焊接效率比原来提高6倍。每件滚筒体的焊接可降低人工成本约80%。     

局部散射源参数估计的非线性算子方法

本文利用单次快摄数据的两个非线性算子估计局部散射源中心波达方向和角扩展,与多维参数搜索和其他低复杂性的局部散射源参数估计算法不同,非线性算子方法给出了单次快摄的局部散射源参数估计的闭式解,无需进行多维搜索和子空间分解。     

Cost estimates to guide pre-selection of processes

A process is a method of shaping, joining or surface-treating a material. Process selection has three steps. The first is to identify from the ‘menu’ of all available processes, the subset, which can give a chosen material the desired shape with the desired detail, precision and finish. The second is to choose, from among these, the ones that will do so at the lowest cost. The final step is to investigate the most promising processes in depth, exploring considerations such as availability, in-house experience, safety and environmental issues. The first two steps can be thought of as process pre-selection. Components have to be assembled and finished to create products. Here too, the ability to rank by cost, however crudely, helps guide pre-selection. Cost models are reviewed from the perspective of material and process selection. An approximate model is useful provided it has generality—that is, it must allow comparison of very different processes. Many approaches fail in this. One that works, based on resource consumption, is developed here and its use for selection is illustrated. It has been implemented as part of a tool that allows rapid pre-selection from a database of 112 processes.     

低掺杂浓度Nd:YVO4激光器的输出特性研究

在对Nd:YVO_4晶体的掺杂浓度和晶体长度对激光器性能的影响进行了分析后,报道了利用掺杂浓度为0.3at％,通光长度为10mm的Nd:YVO_4晶体作为增益介质,带光纤耦合的激光二极管端面抽运的Nd:YVO_4激光器。在抽运功率为27.365W时,获得了14.85W的TEM_(00)模输出,光一光转换效率为60.49％,斜效率达64.5％。     

一种空间自适应小波门限去噪算法

提出了一种空间自适应小波门限去噪算法,该算法在小波域对含噪小波系数做两次自适应去噪,两次自适应门限分别基于最大似然(ML)方差估计和最大后验概率(MAP)方差估计.仿真结果表明,该算法与其它自适应门限去噪算法相比,去噪后的图象具有更高的峰值信噪比(PSNR).