Theory and characteristics of novel variable reluctance 1X resolver

Although brushless resolvers have been used widely as angular position transducers, they are expensive due to their intricate construction, involving a rotary transformer to supply the exciting coils wound on the rotor poles with the current. It is shown theoretically in this paper that the resolver without rotary transformer or brushes can be realized by simple construction, which consists of the stator core with both 4-poles exciting windings and 2-poles output ones and the rotor core carrying no windings. In this resolver the rotor core has minimum gap at one side and a maximum gap at another side of the diameter. It is characterized by an outer surface form that makes the fluctuation part of gap permeance very in proportion to cos θ, where θ represents the angular position of a point in the air gap with respect to the origin on the rotor, the point of minimum air gap. The method determining the rotor form to embody the aforementioned gap permeance variation is also shown. It has been confirmed not only by simulation but also experiment that the 2-phase output voltages of a model designed based on the theory have sinusoidal waveforms with very small harmonic contents. Moreover, the rotor position detected by processing the output voltages through the conventional resolver/digital converter was within acceptable engineering accuracy.     

提高大口径金属主镜面形精度的方法

分析了影响Ｒｉｔｃｈｅｙ－Ｃｈｒｅｉｔｉｅｎ光学系统中金属主反射镜面形精度因素，采用有限元法对立交易的加工过程及其安装进行了模拟，指出提高主镜的面形镜度，既要合理主镜材料的热处理工艺，也要对加工参数进行控制。良好的稳定化处理可以有效地消除材料内部的残余应力，保证主镜尺寸的稳定性。提高加工基准的精度，并采用组合加工镜面，可以大大提高主镜的面形精度，最后，给出了主镜的干涉仪检测结果。     

时效处理对 TiNi 合金相变与性能的影响

通过用ＴＥＭ等方法研究热处理制度（固溶处理、时效处理）对ＴｉＮｉ合金相变组织和性能的影响，找出了最佳热处理制度。结果表明，在４５０～５００℃进行时效处理，Ｔｉ－５０．８ａｔ％Ｎｉ的合金出现了大量的Ｔｉ３Ｎｉ４相，且恢复率最高。     

电弧炉无渣出钢技术及其在我国的应用

本文介绍了电炉无渣出钢技术在国外的应用与发展现状,结合我国电炉的装备水平,重点讨论了应用虹吸出钢和偏心炉底出钢两种方法的条件、作用和应采取的措施。     

裂纹梁动态响应有限元分析中的线弹簧模型

本文提出了一种以线弹簧模型为基础来分析裂纹梁动态响应的新数值方法．应用能量原理和断裂力学理论首次建立了线弹簧模型的刚度矩阵，从而确立了一种能使二维裂纹问题转化为一维分析的梁的有限元模型．使用这个模型，研究了不同裂纹长度和裂纹位置对悬臂梁固有频率和振型的影响，并把计算所得到的数值结果与现有的实验数据作了比较．结果表明，当无量纲裂纹长度小于０．６时，两者吻合得非常好；反之，两者之间存在较大的误差．对这种误差产生的原因，本文也作了解释．     

A Study of Surface Deformation during Wire‐Rod Rolling of High Speed Steels using Experimental and Computational Techniques

The evolution of surface defects during shape rolling of high‐speed steel billets is studied using longitudinal surface defects prepared by machining and welding. The reduction of the defects during rolling in a production mill is compared to the total area reduction of the billets. Samples are collected after pass 4, 6, 8, 14, 19 and the final pass, 28, representing the finished 5.5mm wire. By inspecting the cross sections, the rotation of the billets from pass to pass is evaluated. Results from FE simulations on solid billets are compared to the experimental results. Generally, simulations predict less reduction than observed experimentally. In most cases cracks reduce most effectively followed by carbon steel welds and stainless steel welds.     

Service Reliability Assessment of Weld Repaired CrMoV Steel Rotors

This research deals with the service evaluation of a retired CrMoV steel rotor that has been repaired using deep groove multi‐pass submerged arc welding (SAW) and gas tungsten arc welding (GTAW). Accelerated creep tests were conducted at several elevated temperatures and extrapolated to the service temperatures. The coalescence of carbides and cavity growth during creep were evaluated. For the CrMoV‐GTAW samples, it was found that the creep life depended on the location of the crossweld in the welded specimen. The service lives of the weldments were extrapolated.     

近终形薄带连铸工艺技术比较

近终形薄带连铸是钢铁工业简化工序，节能降耗，降低成本最具有竞争能力的一项重大新工艺技术，本文报导了世界各先进工业国近年来开展研究的最新成果，分析比较了诸多机型的优缺点，并提出了突破工艺技术的技术关键和建议。     

一种识别薄板对接接头的视觉方法

对薄板紧密对接接头的识别问题进行了深入的分析，提出了由照明、自适应局部特征提取、全局特征识别和验证融合在一起的视觉识别方法。它克服了电弧光的干扰，识别结果可靠，可以有效地解决薄板紧密对接接头识别这一难题。     

High concentration erbium doping of silicon-rich SiO2 thin films on silicon

In this work, high concentration erbium doping in silicon-rich SiO₂ thin films is demonstrated. Si plus Er dual-implanted thermal SiO₂ thin films on Si substrates have been fabricated by using a new method, the metal vapor vacuum arc ion source implantation with relatively low ion energy, strong flux and very high dose. X-Ray photoelectron spectroscopy measurement shows that very high Er concentrations on the surfaces of the samples, corresponding to 10 at.% or the doping level of 10²¹ atoms cm⁻³, are achieved. This value is much higher than that obtained by using other fabrication methods such as the high-energy ion implantation and molecular beam epitaxy. Reflective high-energy electron diffraction, atomic force microscopy and cross-section high-resolution transmission electron microscopy observations show that the excess Si atoms in SiO₂ matrix accumulate to form Si clusters and then crystallize gradually into Si nanoparticles embedded in SiO₂ films during dual-ion implantation followed by rapid thermal annealing. Er segregation and precipitates are not formed. Photoluminescence at the wavelength of 1.54 μm exhibits very weak temperature dependence due to the introduction of Si nanocrystals into the SiO₂ matrix. The 1.54-μm light emission signals from annealed samples decrease by less than a factor of 2 when the measuring temperature increases from 77 K to room temperature.