钨锗酸的催化脱水反应

报道了钨锗酸对醇脱水成醚或成烯的催化反应。     

汽车工业生产用热熔胶膜的研制

介绍了汽车工业生产内装饰复合材料用热熔胶膜的性能及其研制状况。这种热熔胶膜具有使用便捷,高效,生产、使用过程中没有污染的具有热熔胶膜的特长。     

A110－1－H／A110－1型氨合成催化剂在双筐并流合成塔中的使用

在双筐并流氨合成塔中使用了Ａ１１０－１－Ｈ／Ａ１１０－１型氨合成催化剂，使用寿命达１７４０天，累计产氨４３８３７８ｔ．该催化剂组合具有低温活性好、易还原、高催化活性、高抗毒能力、良好的热稳定性与破碎强度等优点．     

宽温耐硫变换催化剂制备工艺研究

利用催化剂活性评价、催化剂活性组分含量测定、Ｘ—光衍射等手段，研究了共浸法制备宽温耐硫变换催化剂制备工艺过程中载体氧化铝的吸水率、浸渍条件、煅烧温度等对催化剂性能的影响。     

流动床离子交换工艺在己二酸催化剂回收中的应用

介绍流动床离子交换装置回收催化剂的生产工艺，从交换装置的选择到运行，分析了流动床的优点、影响因素以及生产中应注意的问题和要求。     

Supported Vanadia Catalysts for Dehydrogenation of Ethylbenzene with CO2

Alumina supported vanadia catalysts (V/Al) for selective oxidehydrogenation of ethylbenzene with CO₂ were prepared by impregnation method. During preparation the effect of promoters and calcined temperature was investigated, it was found these two items had a strong influence on the activity of V/Al catalysts. Dehydrogenation reaction with CO₂ was happened in the fixed-bed reactor at 450 °C. Results showed that 15.2% ethylbenzene conversion and 99.2% styrene selectivity were acquired when V₂K/Al catalyst was used.     

Production of agrochemical from waste polyesters

In this study, agrochemical was produced from waste polyesters. Reactions of waste polyesters [poly (ethylene terephthalate) (PET) and poly (butylene terephthalate) (PBT)] powder with ethylene glycol (EG) in the presence of tetrahydrofurane (THF) using 0.003 mol lead acetate as a catalyst were carried out in a batch reactor at 470 K and at atmospheric pressure conditions. Reactions were undertaken with various particle size ranges from 50 to 512.5 μm, and reaction time from 30 to 70 min for reactions of polyesters. Low molecular weight product of polyester was obtained during this process. In the next stage, hydroxylamine hydrochloride (HAHC), cyclohexylamine (CHA), and potasium hydroxide (KOH) solution were introduced to convert low molecular weight product of polyester into terephthalohydroxamic acid (TPHA) by introduction of HCl (Hydrochloric Acid) as per stoichiometric requirement. TPHA can be used as an agrochemical (insecticide) with appreciable efficiency. To increase the polyester conversion rate, external catalyst (0.003 mol lead acetate) was introduced during the reaction. The product was deposited on the surface of unreacted polyester, which was removed from the surface by introducing dimethyl sulfoxide (DMSO). To accelerate the reaction rate, DMSO, CHA, and THF were introduced during the reaction, which has an industrial significance. Depolymerization of polyester was proportional to the reaction time. Depolymerization of polyester was inversely proportional to the particle size of polyester. Analyses of value‐added product (TPHA) and byproducts [EG and BD (1,4‐butanediol)] as well as polyesters were undertaken. A kinetic model is developed, and experimental data simulated with it, which was consistent with the model. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2504–2510, 2006     

混炼硅橡胶的配合技术(八)

介绍了2种汽车部件（密封图、汽车挡风玻璃刮片）装配用混炼硅橡胶的配制，以及硫化过程中能与接触基材粘接的混炼硅橡胶（通过添加各种增粘剂如含乙烯烃碳酸酯基或巯基乙酸酯基化合物、烷氧基硅烷、含乙烯基硅官能基过氧化物为硫化剂）的配制。     

激光扫描车身测量传感器靶标识别体系的研究

介绍了四光束激光扫描测量车身三维坐标的系统构成和基本原理,从系统PIN预处理输出的靶标回射信号的特点出发,为汽车车身测量传感器设计了基于条形码识别原理的合作靶标识别体系,最多可同时对27个测量点进行有效识别,确保传感器的精度要求和效率要求,达到了很好的实验效果。     

Monolithically integrated CoP nanowire array: An on/off switch for effective on-demand hydrogen generation via hydrolysis of NaBH<Subscript>4</Subscript> and NH<Subscript>3</Subscript>BH<Subscript>3</Subscript>

The issues of hydrogen generation and storage have hindered the widespread use and commercialization of hydrogen fuel cell vehicles.It is thus highly attractive,but the design and development of highly active non-noble-metal catalysts for on-demand hydrogen release from alkaline NaBH4 solution under mild conditions remains a key challenge.Herein,we describe the use of CoP nanowire array integrated on a Ti mesh (CoP NA/Ti) as a three-dimensional (3D) monolithic catalyst for efficient hydrolytic dehydrogenation of NaBH4 in basic solutions.The CoP NA/Ti works as an on/off switch for on-demand hydrogen generation at a rate of 6,500 mL/(min.g) and a low activation energy of 41 kJ/mol.It is highly robust for repeated usage after recycling,without sacrificing catalytic performance.Remarkably,this catalyst also performs efficiently for the hydrolysis of NH3BH3.