Study on bioleaching of primary chalcopyrite ore with thermoacidophilic archae

A high temperature-tolerating thermoacidophilic archae （TA） was isolated from water samples collected from a hot sulfur-containing spring in the Yunnan Province, China, and was used in bioleaching experiments of a low-grade chalcopyrite ore. The TA grow at temperatures ranging from 40 to 80℃, with 65℃ being the optimum temperature, and at pH values of l.5 to 4.0, with an optimum pH value of 2.0. The bioleaching experiments of the chalcvpyrite ore were conducted in both laboratory batch bioreactors and leaching columns. The results obtained from the bioreactor experiments showed that the TA bioleaching rate of copper reached 97% for a 12-day leaching period, while the bioleaching rate was 32.43% for thiobacillus ferrooxidans （Tf） leaching for the same leaching time. In the case of column leaching, tests of a two-phase leaching （196 days）, that is, a two-month （56 days） Tf leaching in the first phase, followed by a 140-day TA leaching in the second phase were performed. The average leaching rate of copper achieved for the 140-day TA leaching was 195mg/（L.d）, while for the control experiments, it was as low as 78mg/（L .d） for the Tf leaching, indicating that the TA possesses a more powerful oxidizing ability to the chalcopyrite than Tf Therefore, it is suggested that the two-phase leaching process be applied to .for the heap leaching operations, whereas, the TA can be used in the second phase when the temperature inside the heap has increased, and the primary copper sulfide minerals have already been partially oxidized with Tf beforehand in the first phase.     

基于遗传算法的产品制造的优化调度

研究了企业产品制造的调度问题 ,并建立了调度的最小模型。引入效率函数 ,运用遗传退火进化算法实现了调度决策的优化 ;提出了将遗传退火算法和分派规则相结合的调度策略和动态编码的方法 ,放宽了约束条件 ,提高了搜索效率和速度 ,保证其全局收敛性。     

A Semi‐Batch Process for Nitroxide Mediated Radical Polymerization

Summary: A semi‐batch process using nitroxide mediated polymerization, was explored for the design of low molecular weight solvent‐borne coatings, typical of those used in the automotive industry. While living radical polymerization (LRP) offers many advantages in the control of polymer chain microstructure that may confer important physical and chemical property benefits to coatings, adapting LRP to a semi‐batch process poses significant challenges in the design and operation of the process. Using styrene monomer, various two‐component initiating systems (free radical initiator, 4‐hydroxy‐TEMPO) were studied to understand the effects of different initiators on the course of polymerization. In addition, an alkoxyamine was synthesized and used as the initiating source. The initiators Luperox 7M75 and Luperox 231 give higher polymerization rates and reasonable control over polymerization, while benzoyl peroxide (BPO), Vazo 67, and the alkoxyamine are less effective. The number of polymer chains in the final product is always less than the theoretical value, reflecting poor initiation efficiency, probably resulting from undesirable termination reactions that become important due to the nature of the semi‐batch process. Adding camphorsulfonic acid (CSA) or charging initiator concurrently with monomer during semi‐batch feed, can increase the polymerization rate while maintaining the living character of the polymerization. The copolymerization of styrene and butyl acrylate is also shown to exhibit living character.

Schematic representation of the exchange reaction to produce N‐TEMPO capped polymer chains.     

真空间歇精馏分离橙花醇和香叶醇的研究

橙花醇和香叶醇是重要的基础香料,沸点差仅为2℃,具有热敏性。以往研究中应用减压间歇精馏分离橙花醇和香叶醇的混合物,一次精馏得到90%以上的产品收率低(仅为46%),且塔釜温度较高,操作周期长,不宜于工业生产。本文针对沸点差较小的热敏性物系,采用减压高效间歇精馏方法对橙花醇和香叶醇的混合物进行了分离研究。通过考察全回流时间、回流比、加热负荷和压力等操作因素对分离效果的影响,确定了适宜的操作条件,塔顶压力为600Pa～700Pa,塔压降为4800Pa～4900Pa,釜温在150℃～152℃之间,全回流6h,采用20 1,10 1,5 1的变回流比操作。实验结果显示,单塔精馏即可得到含量大于90%的橙花醇和香叶醇,收率在65%以上,提高20%无热分解现象,过程稳定,为工业生产奠定了基础。     

SBR法处理柠檬酸废水pH变化规律研究

探索了用SBR法处理柠檬酸废水过程中pH的变化规律。研究了柠檬酸废水处理过程中pH变化与COD处理效率的关系，研究目的在于利用易于检测的水质参数为实现SBR处理过程的自动监测和调控作基础试验研究。     

PET/MFMB复合材料的力学性能、热性能的研究

用力学性能测定、DSC和熔体流动速率（MFR）测定法研究聚对苯二甲酸乙二酯／多功能母料（PET／MFMB）复合材料的力学性能和热性能。结果表明，当MFMB的含量为22％时，PET／MFMB复合材料的冲击强度、断裂伸长率分别出现极大值；复合材料中PET、PP的熔点比纯PET、纯PP的稍有降低，当PET／MFMB＝78／22时降低的幅度稍大；复合材料的MFR在PET／MFMB＝78／22时出现转变点。     

路径长度受限的随机需求VRP的模型和算法

路径长度受限的随机需求VRP在生产、生活中有着广泛的应用。给出了路径长度受限的随机需求VRP问题的线性整数规划模型,在不允许部分服务和仅能服务失败一次的策略下设计了一个启发式算法。该算法以离散优化中广泛应用的扫描算法为基础生成服务的一个初始可行方案,然后利用模拟退火算法改进得到近似最优解。对需求为二项分布的50个结点、1个服务中心的问题进行了数值试验,数值结果表明该算法对求解路径长度受限的随机需求VRP是有效的。     

SBR反应器中反硝化条件下去除苯酚工艺

基于异养反硝化原理,在序批式间歇反应器(SBR)中对反硝化同时降解苯酚的菌种进行了149 d的驯化,驯化通过逐步提高进水中苯酚和NO3--N的浓度进行.驯化结束后,进水苯酚质量浓度达到360 mg/L,葡萄糖质量浓度达到100 mg/L,NO3--N质量浓度达到240 mg/L,水力停留时间6 h,苯酚和NO3--N去除率均大于98%.反应器运行结果表明:进水苯酚质量浓度低于720 mg/L时,SBR反应器运行稳定;高浓度NO2--N(＞60 mg/L)可以严重影响微生物对苯酚以及NO3--N的去除能力,同时反应器中20.5%～23.5%的COD可被用于微生物的细胞合成.     

熔块中的气泡缺陷及其解决办法

分析了熔块生产中气泡缺陷产生的各种原因．提出了实际生产中的注意事项和具体的解决办法。     

铁电薄膜存储器底电极Pt/Ti的制备及性能研究

应用射频磁控溅射方法 ,在Si基片上采用不同的溅射工艺制备了铁电薄膜底电极Pt/Ti,并分析了在不同温度下退火后材料的电导率性能和粘结力性能 ,从理论和实验上分析了不同的溅射工艺和退火处理对底电极性能的影响。