定向结晶时高温合金组织控制的工艺前景EI

报道了俄国航空材料研究院(ВИАМ)在定向单晶高温合金组织控制方面的最新研究成果,例如,利用高速定向结晶工艺创造具有单晶组织的宽弦叶片,以及制造前后缘为规定位相的单晶,而在叶身中部为细柱状定向结晶组织的复合组织叶片。这些新工艺提高了材料的工作能力和发动机寿命。     

Testing the robustness of CIECAM02

CIE TC8‐01 has adopted a new color appearance model: CIECAM02¹ replaces the CIECAM97s.² The new model consists of a number of refinements and simplifications of the CIECAM97s color appearance model. This article describes further tests to the robustness of the forward and reverse modes. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 99–106, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20087     

Contact interaction of double titanium and chromium diboride with Fe-Cr alloys

The kinetics of wetting double titanium and chromium diboride by iron-based alloys with different chromium content is studied. It is shown that contact angles are formed in such systems over the range 0–10°. The energy parameters of wetting are calculated. It is established that chromium as a surface-active element promotes Fe-Cr alloy spreading on the diboride surface. The microstructure of the interaction area is studied. It is shown that terminal solid solutions and eutectics are formed in the TiCrB₂-(Fe-Cr) system. The optimum compositions of the metallic binder are determined for TiCrB₂-based composite materials. __________ Translated from Poroshkovaya Metallurgiya, Vol. 46, No. 1–2(453), pp. 109–115, 2007     

Analysis of low load transients for the Vandellòs-II NPP: Application to operation and control support

The Technical University of Catalonia (UPC) has been jointly working with the Asociación Nuclear Ascó-Vandellòs (ANAV) for a number of years in order to establish, qualify and use best estimate (BE) models for the reactors under the control of ANAV. ANAV is the consortium that is responsible for operation of the Ascó and Vandellòs-II reactors. The reactors are Westinghouse-design three-loop PWRs with an approximate electrical power of 1000 MW. The existing integral plant models for each plant are currently used for many different purposes among which are support of plant operation and control. Quite a number of studies have been done in order to improve both safety and plant competitiveness. Most of these dynamic analyses were carried out in relation to transients starting at nominal full power or at least, very close to full power. This paper develops a specific use of the Vandellòs-II plant model for operation and control support at low power involving new ranges of system actuation parameters. It also examines scenarios that are somewhat different from those typically analysed. The study starts showing the results of an assessment case, which is a start-up test and provides some additional qualification, and subsequently attempts to establish calculations to support both an improvement in feed water controls and to set up operating recommendations for low-load manual operation of feed water turbo-pump. Both results hopefully, will produce an outcome, which leads to an improvement in safety and reduces reactor trip probability.     

钻井工程固井胶结界面研究现状

固井质量问题在石油勘探开发中备受关注，对特殊工艺井钻井、油水井开采寿命和勘探开发效益有直接的影响。对固井胶结界面的研究是从根本上提高固井质量的一项基础性研究工作。为了推动固井胶结界面研究工作的开展，分析了国内外近年来有关固井界面研究的文献，阐述了开展固井胶结界面基础研究工作的意义，着重分析了这一研究领域目前所采用的研究方法，以及提高固井界面胶结强度的主要途径。在分析文献的基础上，提出今后深入开展固井界面研究工作的重点是：1）继续完善研究方法；2）重视动态研究；3）从胶结界面的微观结构和钻井工程整体系统的角度开展研究工作；4）注重改善胶结界面水化产物的微观结构和钻井工作液之间的协调增强作用。     

Marmaray project: Tunnels and stations in BC contract

Istanbul is one of the most famous historical cities in the world. However, the project alignment selected as the best of a range of alignments cannot avoid passing beneath the historical and cultural heritages of Istanbul as well as under ancient and densely inhabited areas of the city. This paper will explain some of the challenges related to the bored tunnels.

Historical buildings are vulnerable. Yet many existing residential and office buildings are old and constructed on minimal foundations. As a consequence, it is vital that any drawdown of groundwater and any ground settlements have to be minimized.

In addition, the connection between the immersed and bored tunnels will be made directly and totally underground, without the usual intermediate shafts and beneath the deep waters of the Bosphorus Strait. This operation needs the utmost control of the tunnel excavation face to ensure its stability and to minimize water ingress. Based on such considerations, tunnel excavation by tunnel boring machine (TBM) using a slurry shield and having the ability to operate under high pore pressures was recommended as the method of excavation for the main running tunnels.

The paper will explain how the design team from Avrasyaconsult – the Employer’s Representative – arrived at the final minimum, specific and functional requirements of the bored tunneling works which are to be carried out using the ‘FIDIC EPC/Turnkey Project’ conditions.     

A Study on the Model of Forecasting System about the Actual Telephone Occupation in the Lead Development

ＡＳｔｕｄｙｏｎｔｈｅＭｏｄｅｌｏｆＦｏｒｅｃａｓｔｉｎｇＳｙｓｔｅｍａｂｏｕｔｔｈｅＡｃｔｕａｌＴｅｌｅｐｈｏｎｅＯｃｃｕｐａｔｉｏｎｉｎｔｈｅＬｅａｄＤｅｖｅｌｏｐｍｅｎｔ￥ＸｉｅＳｈｉｃｈａｎｇ；ａｎｄＸｉｅＸｕｅｍｅｉ（Ｄｅｐａｒｔｍｅｎｔｏ...     

A novel methanol-tolerant Ir-Se chalcogenide electrocatalyst for oyxgen reduction

A novel methanol-tolerant oxygen-reduction catalyst, Iridium-selenium (Ir-Se) chalcogenide, was synthesized by chemical precipitation in an organic solvent. Auger electron spectroscopy (AES) analysis confirmed that the synthesized Ir-Se chalcogenide had a chemical formula of Ir₄Se. This chalcogenide showed strong catalytic activity towards the oxygen reduction reaction (ORR) and a high methanol tolerance. It was found that most of the oxygen could be directly reduced to water through a four-electron pathway with less than 10% hydrogen peroxide (H₂O₂) being produced during the ORR. The improvement in catalytic activity of the Ir-Se chalcogenide in comparison with that of pure Ir might be attributed to the effect of a bimetallic interaction.     

The distribution of anthocyanins in grape skin extracts of port wine cultivars as determined by high performance liquid chromatography

The distribution of anthocyanins in methanolic skin extracts of 16 grape cultivars used for port wine production and grown at five sites in the Douro Valley in Northern Portugal has been assessed by high performance liquid chromatography. Results are confined to the seven most readily separated and identified anthocyanins and are expressed as percentages of their total (88–99% of the total integrated area). Anthocyanins based on malvidin (Mv) predominated. Of these, Mv 3-glucoside was the major pigment (33–60%), being exceeded by Mv 3-p-coumarylglucoside (2–51%) in only two cultivars; Mv 3-acetylglucoside (1–15%) was consistently the lowest. Peonidin 3-glucoside (1–27%) was prominent in four cultivars, but delphinidin 3-glucoside (1–11%), petunidin 3-glucoside (2–11%) and cyanidin 3-glucoside (trace-6%) were of low proportions throughout. The ratio Mv 3-acetylglucoside/total Mv glucosides appeared characteristic of cultivar, independent of site, and a useful aid to identification of grape cultivars. The coloured pulp of some cultivars contained peonidin 3-glucoside as a major component, present in greater proportions than in the skin; the percentage of Mv 3-p-coumarylglucoside was lower in pulp than in skin. The identities of six of the seven anthocyanins were confirmed by fast atom bombardment mass spectrometry and the structures of the Mv derivatives were determined by nuclear magnetic resonance. The formation of formyl and acetyl anthocyanin artefacts is described.     

添加高速钢粉对烧结钢组织与性能的影响

研究了添加高速钢粉对烧结钢组织与性能的影响。实验结果表明，含２０％高速钢的烧结钢综合力学性能最好；添加高速钢粉能导致烧结钢密度减小的冲击韧性降低，当高速钢含量增中时，硬度随之增加，烧结钢中残余奥氏体和马氏体的含量与高速钢的含量呈线性关系。烧结钢中的马氏体显微硬度很高，它主要原高速钢粒子和原铁粒子的连接区域形成。