Aperture-Adjustable and Repairable Metal-Based MOFs Catalysis Membrane for Water Purification

Precise adjustment of the pore size, damage repair, and efficient cleaning is all challenges for the wider application of inorganic membranes. This study reports a simple strategy of combining dry-wet spinning and electrosynthesis to fabricate stainless-steel metal–organic framework composite membranes characterized by customizable pore sizes, targeted reparability, and high catalytic activity for membrane cleaning. The membrane pore size can be precisely customized in the range of 14–212 nm at nanoscale, and damaged membranes can be repaired by targeted treatment in 120 s. In addition, advanced oxidation processes can be used to quickly clean the membrane and achieve 98% flux recovery. The synergistic actions of the membrane matrix and the selective layer increase the adsorption energy of active sites to oxidant, shorten the electron transfer cycle, and enhance the overall catalytic performance. This study can provide a new direction for the development of advanced membranes for water purification and high-efficiency membrane cleaning methods.     

2D Bi2O2Te Semiconductor with Single-Crystal Native Oxide Layer

Following logic in the silicon semiconductor industry, the existence of native oxide and suitable fabrication technology is essential for 2D semiconductors in planar integronics, which are surface-sensitive to typical coating technologies. To date, very few types of integronics are found to possess this feature. Herein, the 2D Bi₂O₂Te developed recently is reported to possess large-area synthesis and controllable thermal oxidation behavior toward single-crystal native oxides. This shows that surface-adsorbed oxygen atoms are inclined to penetrate across [Bi₂O₂]_n²ⁿ⁺ layers and bond with the underlying [Te]_n²ⁿ⁻ at elevated temperatures, transforming directly into [TeO₄]_n²ⁿ⁻ with the basic architecture remaining stable. The oxide can be adjusted to form in an accurate layer-by-layer manner with a low-stress sharp interface. The native oxide Bi₂TeO₆ layer (bandgap of ≈2.9 eV) exhibits visible-light transparency and is compatible with wet-chemical selective etching technology. These advances demonstrate the potential of Bi₂O₂Te in planar-integrated functional nanoelectronics such as tunnel junction devices, field-effect transistors, and memristors.     

Imaging Solvent-Triggered Gaseous Iodine Uptake on Single Covalent Organic Frameworks

Covalent organic frameworks (COFs) are promising solid absorbents for the treatment of gaseous iodine. However, extensive efforts are still focused on empirical optimizations of specific binding sites and pore structures in COFs, and the chemical control of gaseous iodine uptake on COFs remains challenging. In this study, the chemically triggered sorption properties of COF-300 for I₂ vapors at the single-particle level with the dark-field microscope (DFM) are explored. The present operando single-particle DFM imaging method enables the direct visualization of an adsorption activity transformation from inactive COF-300 to active solvated COF-300 toward gaseous I₂ vapors. Exploiting the useful reaction information from time-lapsed DFM images, the tunable adsorption performance of solvated COF-300 is quantitatively compared by various solvents. The results illustrate that the isopropanol (IPA)-solvated COF-300 achieves the optimum adsorption capacity for I₂ among the absorbents. The reaction mechanism is elucidated to be the channel size enlargement and modification of internal surface chemistry in the IPA-solvated COF-300, producing a stable I₂/IPA-solvated COF-300 complex after the sorption reaction. The present chemical control of the sorption behavior of COF-300 revealed by DFM opens up a new fundamental paradigm for rationally developing high-performance COF-based absorbents for removing I₂ vapors.     

Lateral WSe2 Homojunction through Metal Contact Doping: Excellent Self-powered Photovoltaic Photodetector

Here an IR-heating chemical vapor deposition (CVD) approach enabling fast 2D-growth of WSe₂ thin films is reported, and the great potential of metal contact doping in building CVD-grown WSe₂-based lateral homojunction is demonstrated by contacting with TiN/Ni metals in favor of holes/electrons injection. Shortening nanosheet channel to ≈2 µm leads to pronounced enhancement in the performance of diode. The fabricated WSe₂-based diode exhibits high rectification ratios without the need of gate modulation and can work efficiently as photovoltaic cell, with maximum open circuit voltage reaching up to 620 mV and a high power conversion efficiency over 15%, empowering it as superb self-powered photodetector for visible to near-infrared lights, with photoresponsivity over 0.5 A W⁻¹ and a fast photoresponse speed of 10 µs under 520 nm illumination. It is of practical significance to achieve well-performed photovoltaic devices with CVD-grown WSe₂ using fab-friendly metals and simple processing, which will help pave the way toward future mass production of optoelectronic chips.     

Optical properties of carbon-containing titanium oxide nanocomposites obtained by the pulsed plasma chemical method

This paper presents the results of an experimental investigation on the optical properties of the TiO₂ and Ti_xC_yO_z nanopowders, produced by the pulsed plasma chemical method. Pulsed plasma chemical synthesis is realized on the laboratory stand, including a plasma chemical reactor (6 l) and TEA-500 electron accelerator. The parameters of the electron beam are as follows: 400–450 keV electron energy, 60 ns half-amplitude pulse duration, up to 200 J pulse energy, and 5 cm beam diameter. In TiO₂ sample, obtained using the pulsed plasma chemical method, the particles can be divided into two groups: 100–500 nm large spherical particles and tiny complex particles (sized less than 100 nm). For TixCyOz sample, the morphology of the particles is mainly presented with irregular fragment shape. The average size of the particles is ranged from 200 to 300 nm. The band gap for all synthesized samples is within 2.94–3.35 eV.     

A Novel and Facile Route to Synthesize Atomic‐Layered MoS2 Film for Large‐Area Electronics

High‐quality and large‐area molybdenum disulfide (MoS₂) thin film is highly desirable for applications in large‐area electronics. However, there remains a challenge in attaining MoS₂ film of reasonable crystallinity due to the absence of appropriate choice and control of precursors, as well as choice of suitable growth substrates. Herein, a novel and facile route is reported for synthesizing few‐layered MoS₂ film with new precursors via chemical vapor deposition. Prior to growth, an aqueous solution of sodium molybdate as the molybdenum precursor is spun onto the growth substrate and dimethyl disulfide as the liquid sulfur precursor is supplied with a bubbling system during growth. To supplement the limiting effect of Mo (sodium molybdate), a supplementary Mo is supplied by dissolving molybdenum hexacarbonyl (Mo(CO)₆) in the liquid sulfur precursor delivered by the bubbler. By precisely controlling the amounts of precursors and hydrogen flow, full coverage of MoS₂ film is readily achievable in 20 min. Large‐area MoS₂ field effect transistors (FETs) fabricated with a conventional photolithography have a carrier mobility as high as 18.9 cm² V^?1 s^?1, which is the highest reported for bottom‐gated MoS₂‐FETs fabricated via photolithography with an on/off ratio of ≈10⁵ at room temperature.     

Sandwiched Thin‐Film Anode of Chemically Bonded Black Phosphorus/Graphene Hybrid for Lithium‐Ion Battery

A facile vacuum filtration method is applied for the first time to construct sandwich‐structure anode. Two layers of graphene stacks sandwich a composite of black phosphorus (BP), which not only protect BP from quickly degenerating but also serve as current collector instead of copper foil. The BP composite, reduced graphene oxide coated on BP via chemical bonding, is simply synthesized by solvothermal reaction at 140 °C. The sandwiched film anode used for lithium‐ion battery exhibits reversible capacities of 1401 mAh g^?1 during the 200th cycle at current density of 100 mA g^?1 indicating superior cycle performance. Besides, this facile vacuum filtration method may also be available for other anode material with well dispersion in N‐methyl pyrrolidone (NMP).     

Drug self-assembly: A phenomenon at the nanometer scale with major impact in the structure–biological properties relationship and the treatment of disease

Under water-rich conditions, small amphiphilic and hydrophobic drug molecules self-assemble into supramolecular nanostructures. Thus, substantial modifications in their interaction with cellular structures and the ability to reach intracellular targets could happen. Additionally, drug aggregates could be more toxic than the non-aggregated counterparts, or vice versa. Moreover, since self-aggregation reduces the number of effective “monomeric” molecules that interact with the target, the drug potency could be underestimated. In other cases, the activity could be ascribed to the non-aggregated molecule while it stems from its aggregates. Thus, drug self-assembly could mislead from drug throughput screening assays to advanced preclinical and clinical trials. Finally, aggregates could serve as crystallization nuclei. The impact that this phenomenon has on the biological performance of active compounds, the inconsistent and often controversial nature of the published data and the need for recommendations/guidelines as preamble of more harmonized research protocols to characterize drug self-aggregation were main motivations for this review. First, the key molecular and environmental parameters governing drug self-aggregation, the main drug families for which this phenomenon and the methods used for its characterization are described. Then, promising nanotechnology platforms investigated to prevent/control it towards a more efficient drug development process are briefly discussed.