多样性制导分段进化的基因表达式编程

为了解决基于传统基因表达式编程（GEP）的函数挖掘及其改进算法仍然存在局部优化的缺陷这一问题,提出了以基因组多样性制导的分阶段进化挖掘算法DGGEP。给出了GEP 进化阶段和基因组多样性评估模式的定义;提出了描述进化阶段的进化因子概念和分阶段进化策略;采用动态遗传算子设计和群体规模控制方法,使进化更快速跳出局部最优。实验表明了新算法的有效性,能减少进化停滞代数65％以上,使群体的平均适应度提高12%以上。     

多孔普鲁士蓝类似物的合成及电催化析氧性能

采用一种简单易行的共沉淀法合成了前驱体镍铁普鲁士蓝类似物NiFe-PBA（NF）,然后通过溶剂热处理获得了镍铁普鲁士蓝纳米多孔材料（NFP）。通过XRD、SEM、TEM、XPS、BET及电化学方法对所得材料进行了结构表征和析氧性能测试。结果表明,NFP相对于前驱体NF,电化学比表面积增大、催化活性位点增多,电催化析氧反应（OER）性能显著提高。在浓度1 mol/L KOH水溶液中,达到10 mA/cm2电流密度时,NFP所需过电位仅为260 mV,比NF（320 mV）前驱体低18.75%,也优于大多数已报道的非贵金属催化剂和商用贵金属催化剂,显示出良好的应用前景。     

Microstructure evolution of cold-sprayed coating during deposition and through post-spraying heat treatment

The microstructural features of cold-sprayed coatings were investigated using Cu, Ti and Zn feedstocks by optical microscopy, scanning electron microscopy and transmission electron microscopy to reveal the microstructure evolution mechanisms in cold spray. Four typical effects including tamping, refinement, impact-induced fusion and annealing were examined on microstrueture. It is found that the microstructure of cold spray coating is remarkably influenced by spray materials. Ti coatings consist of evident porous layer and Cu coatings present a limited porous layer only near the surface. It is clear that the successive tamping effect and dynamic refinement of grains significantly influence the microstructure evolution of cold-sprayed coating. The tamping effect leads to the densification of porous coating layer gradually and the refinement effect leads to the formation of fine microstructure. It is considered that the large difference in the formation of porous layer is attributed to the dynamic impact pressure and hardenability of materials. It is also found that the impact-induced fusion during deposition of Zn coating can also modify the interfacial microstructure between particles in cold spray coating. Moreover, the nanocrystalline phase can be formed at the interfaces among particles resulting from the localized melting of the interfaces and tamping effect. Furthermore, the annealing treatment can modify the microstructure and property of a cold-sprayed coating.     

Effects of blending on surface characteristics of copper corrosion products in drinking water distribution systems

Copper scales formed over 6-months during exposure to ground, surface and saline waters were characterized by EDS, XRD and XPS. Scale color and hardness were light red-brown-black/hard for high alkalinity and blue-green/soft for high SO₄ or Cl waters. Cl was present in surface or saline copper scales. The Cu/Cu₂O ratio decreased with time indicating an e transfer copper corrosion mechanism. Cu₂O, CuO, and Cu(OH)₂ dominated the top 0.5-1 A° scale indicating continuous corrosion. Cu₂O oxidation to CuO increased with alkalinity, and depended on time and pH. Total copper release was predicted using a Cu(OH)₂ model.     

CORDIS无机粘结剂的特性与试验

介绍了德国HA公司最新研制的CORDIS无机粘结剂的组成与性能以及应用中的问题。     

偏晶合金液-液相变过程模拟

建立了能描述在弥散相液滴形核、扩散长大、碰撞凝并及两液相空间分离等因素共同作用下，偏晶合金液-液相变过程中组织演变过程的数学模型。将计算的温度场和浓度场与控制凝固组织演变的动力学方程相耦合，模拟研究了单向冷却条件下Al-Pb合金液-液相变过程中的组织演变过程。结果表明，随着冷却的进行，液-液相变区不断由试样底部向试样顶部推进，直至贯穿整个试样。由于在凝固过程中弥散相液滴进行Marangoni迁移和Stokes运动，试样中的某些部位会出现液滴贫化、过饱和度增加和多次形核现象。     

工业纯Al的缝隙腐蚀再钝化电位

工业纯Ａｌ的缝隙腐蚀再钝化电位ＥＲ是缝隙结构的特征值，与缝隙腐蚀下限电位ＶＣＲＥＶ一致，比孔蚀电位负约１００ｍＶ，说明缝隙腐蚀更易发生．     

中原油田-曲阜-济南天然气管道工程沿线土壤腐蚀性评价

依据SY／T0007—1999《钢质管道及储罐腐蚀控制工程设计规范》对中原油田-曲阜-济南天然气管道工程沿线土壤进行了腐蚀评价，指出该管道沿线土壤以中强性腐蚀为主，文章对土壤腐蚀评价过程进行了较详细的介绍。     

金属塑性成形过程的微观组织模拟与优化技术研究现状

介绍了金属塑性成形过程中微观组织演变的数学模型和常用的微观组织优化目标函数 ,给出了金属塑性成形微观组织模拟和优化的主要方法———微观遗传算法和灵敏度分析方法的基本原理 ,叙述了近年来国内外金属塑性成形微观组织模拟与优化研究概况。