Ion implantation effect on atomic structure of deformed Si, Ir, W, Ni and Cu

It has been revealed, that in Ir subjected to severe plastic deformation, an ultrafine grained structure (UFG) is formed (the grain size of 20-30 nm). Practically no defects have been detected within the grains, while, in the case of Ar⁺ implantation, the subgrain structure with characteristic sizes of about 3-5 nm is formed; defects have been detected within subgrains.The subgrain structure was also revealed in UFG Ni and Cu after severe plastic deformation (SPD) (subgrain size of 3-15 nm), but in the latter case the observed boundary region is broader and subgrain is highly disoriented.     

Austenitizing treatment influence on the electrochemical corrosion behavior of 0.3C-14Cr-3Mo martensitic stainless steel

Effects of austenitizing treatment temperatures on aqueous corrosion properties of martensitic stainless steels were investigated by electrochemical tests (potentiodynamic test, potentiostatic test and electrochemical impedance spectroscopy), and surface analyses (optical microscopy and XRD). The results of potentiodynamic test revealed that the breakdown potential increased with the increased austenitizing temperature, indicating increased relative resistance to initiation of localized corrosion. EIS measurements showed that MSS3 (1030 °C) exhibits larger polarization resistance value than MSS1 (970 °C) and MSS2 (1000 °C) at passive and breakdown states. This was caused by decreasing the amount of Cr-rich M₂₃C₆ carbide which acts as preferential sites for pitting corrosion.     

矿山胶结充填技术的发展

全面介绍了胶结充填技术发展史、胶结充填料类型、充填站设备和胶凝材料种类。充填对提高矿石回采率、改善岩层控制状况和减少废石在地面堆存都是有利的，胶结充填对我国矿山充填采矿具有一定的参考价值。     

SiCf/SiC陶瓷复合材料的研究进展

SiCf/SiC陶瓷复合材料具有良好的力学性能、高温抗氧化性和化学稳定性，是航空航天和原子能等领域理想的新一代高温结构材料。本文概述了增强体SiCt的发展状况及存在的问题，对SiCt/SiC材料的制备工艺、界面相的研究状态、材料的损伤破坏机理和目前的应用研究进展做了综述，并分析了SiCf/SiC陶瓷复合材料的研究重点和发展前景。     

纯镁对碳化硼颗粒的常压浸渗

本文研究了纯镁对不同致密度的碳化硼(B₄C)颗粒基片的常压浸渗性;讨论了镁液对B₄C颗粒聚集体常压浸渗的影响因素;提出了浸渗模型。研究表明,纯镁在氩气保护下,800～850℃温度范围保温30min即可浸渗B₄C颗粒聚集体。浸渗深度和宽度随加热温度升高和保温时间延长而增加;常压浸渗的B₄C_P/Mg复合材料具有很高的硬度,B₄C颗粒在基体中分布较均匀。     

硬质合金工具和异型产品的发展战略探讨

根据硬质合金异型产品和工具市场分析以及江西省的具体情况，提出了江西发展硬质合金异型产品和工具的基础条件、重点产品选择、发展步骤。认为江西应重点发展硬质合金棒材和孔加工工具，快步引进世界最先进的生产线和技术，采取跳跃式的发展战略，赶上世界先进水平。     

Evaluation of Slow Crack Growth Resistance in Ceramics for High-Temperature Applications

The slow (subcritical) crack growth (SCG) resistance of Si₃N₄ and SiC ceramics has been evaluated by a stepwise loading test on bending bars precracked by Vickers indentation. Three highly refractory materials were selected for the evaluation: i.e., (1) high-purity Si₃N₄ sintered by hot isostatic pressing (HIP) without additives and (2,3) α - and β - SiC pressureless sintered with B and C addition. Under the hypothesis of linear elastic behavior at high temperature, which was found satisfied in the present materials, the SCG resistance was expressed in terms of initial stress intensity factor critical for SCG failure within a predetermined lifetime. The present method was found useful in shortening the testing time and consistent with other traditional fatigue tests (e.g., static-fatigue test): It is recommended as a screening test for materials under research and development. Among the materials tested in the present study, the highest SCG resistance up to 1440°C was found in the high-purity Si₃N₄ without additives.     

激光法合成SiC超细粉末物理化学过程的研究——Ⅰ.实验规律及粉末特性

用50W连续波CO_2激光器为热源,诱发SiH_4和C_2H_4反应,合成SiC超细粉末。实验确定了反应腔体内压力p、气源中的C/Si原子比、喷嘴内径2r以及激光功率密度与粉末特性之间的关系,并对合成的产物进行物理、化学表征。     

锻热淬火工艺对工具钢碳化物粒度的影响

研究了锻热淬火工艺对Ｔ１０钢和ＧＣｒ１５钢碳化物技度的影响。结果表明，碳化物粒度随变形量的增大而细化；终锻温度在高于碳化物析出的温度范围内变化，其碳化物粒度都同样细小；终锻温度不宜过低，否则将使碳化物变粗。     

Study on Factors Affecting the Structure of High SpeedSteel Ingot Produced by ESR

ＳｔｕｄｙｏｎＦａｃｔｏｒｓＡｆｆｅｃｔｉｎｇｔｈｅＳｔｒｕｃｔｕｒｅｏｆＨｉｇｈＳｐｅｅｄＳｔｅｅｌＩｎｇｏｔＰｒｏｄｕｃｅｄｂｙＥＳＲＬｉＺｈｅｎｇｂａｎｇ；ＣｈｅＸｉａｎｇｑｉａｎＡｂｓｔｒａｃｔ：Ｔｈｅｉｎｆｌｕｅｎｃｅｏｆｔｈｅｍｅｔａｌｐ...