反应条件对改性ZSM-5催化裂化性能的影响

将ＳｉＯ２／Ａｌ２Ｏ３＝２５４６的ＮａＺＳＭ ５沸石用ＨＣｌ、ＮＨ４Ｃｌ、ＬａＣｌ３进行改性,并对改性样品进行水热处理（７３０℃,５ｈ,１００％水蒸汽）。用正十六烷裂解反应考察改性样品水热处理后的催化性能,并研究了反应条件对正十六烷裂解活性和选择性的影响。结果表明,低温有利于提高汽油选择性,高剂油比有利于提高活性。     

大豆分离蛋白改性的研究(二)

用海藻酸钠对大豆分离蛋白进行了改性,对一些环境因素如温度、ｐＨ值、离子浓度等对反应的影响作了研究。研究表明,海藻酸钠能显著提高大豆分离蛋白的粘度,在０．５％海藻酸钠和０．０１ｍｏｌ／Ｌ氯化钙作用下,大豆分离蛋白的粘度能提高１０００多倍。确定了海藻酸钠与大豆蛋白的最佳浓度比,其数学模型为ｙ＝７．３４１０－４．４０２１ｘ。     

家用无线智能燃气表的三防防护

城市进程的加快同时也对燃气行业提出了更高的要求,如何有效地降低运行故障率成为行业内有待解决的问题。文章主要讲述了如何通过加强燃气表的三防防护工作,有效降低控制部分的运行故障率。其中通过列举一款智能表的材料优选、工艺防护和结构防护三方面进行的具体三防防护处理措施,以及投入市场使用后所取得的效果,从而验证了经过三防处理的燃气表在恶劣环境下稳定运行的寿命可以得到很大的提高。     

Signal transformation and interpolation based on modified DCT synthesis

This paper proposes a novel signal transformation and interpolation approach based on the modification of DCT (Discrete Cosine Transform). The proposed algorithm can be applied to any periodic or quasi periodic waveform for time scale and/or pitch modification purposes in addition to signal reconstruction, compression, coding and packet lost concealment. The proposed algorithm has two advantages:

• (i) 

  Since DCT does not have the explicit phase information, one does not need the cubic spline interpolation of the phase component of the sinusoidal model.

• (ii) 

  The parameters to be interpolated can be reduced because of the energy packing efficiency of the DCT. This is particularly important if signal synthesis is carried out on a remote location from the transmitted parameters.

The results are presented on periodic waveforms and on speech signal in order to appreciate the fidelity of the proposed algorithm. In addition, the proposed method is compared with TD-PSOLA, sinusoidal model and phase vocoder algorithms. The results are presented in objective PESQ scores for time scale modification and output files are provided as supplementary material,¹ for subjective evaluation, for packet lost concealment. Results prove that the proposed modification of the DCT synthesis provides a favorable algorithm for specialists working in the signal processing area.     

基于扫频RCS测量的便携式吸波涂料测量仪

介绍了一种测试吸波涂料反射率的便携式测量设备,该设备基于扫频RCS测量原理实现。与传统方法相比,本设备具备简单、测试灵活的优点;与其他的便携式设备相比,本设备精度更高、性能更稳定。     

SnO2 thin films modified by the SnO2–Au nanocomposites: Response to reducing gases

The influence of the SnO₂ surface modification by the SnO₂–Au nanocomposites on conductivity response to such reducing gases as CO and H₂ has been analyzed in the present paper. Both initial SnO₂ films, subjected for surface modification, and SnO₂–Au nanocomposites were deposited by Successive Ionic Layer Deposition (SILD) method. The SnO₂–Au nanocomposites with Au/Sn ratio 1 were synthesized using HAuCl₄ and SnCl₂ precursors. The thickness of the Au-SnO₂ nanolayers varied from 0.7–1.0 nm to 10–15 nm. It was established that the increase in the thickness of the SnO₂–Au nanocomposite layer formed on the surface of the SnO₂ films was accompanied by both the improvement of sensor response and the decrease in response and recovery times. An explanation of the observed effects has been proposed.     

偏序时态XML索引TempPartialIndex

时态数据管理是常规数据管理的深化和扩展,具有理论研究的意义与实践应用的价值.时态数据索引是时态数据管理的重要技术支撑,是其中的一个研究热点.首先,提出了一种时态数据结构,通过数据节点间的偏序关系,可将常规的二维时间区间的处理转化为基于偏序的时态等价类上的一维的处理,该数据结构可以快速有效地处理时态操作;其次,在该新型时态数据结构基础上研究了时态XML索引TempPartialIndex,其基本特征是将时态数据结构整合到非时态的XML索引中,即,将其整合到语义层之中,通过时态过滤和语义过滤掉大量节点之后,再进行结构连接;另外,着重讨论了基于TempPartialIndex“一次一集合”及其时态变量查询和增量式的动态更新机制.同时,仿真结果表明：TempPartialIndex能够有效地支持时态XML的各类查询及更新操作,技术上具有可行性和有效性.