Development of design principles for a creep-limited alloy for turbine blades

Recent advancements in turbine-blade materials engineering are reviewed in light of general superalloy research and the author’s work on a new powder metallurgy IN-792 creep-limited alloy for application in blades of gas-turbine engines. The developed set of principles presented in this paper incorporates all the factors that must be taken into consideration in selecting and designing an alloy for turbine blades.     

湿法冶金制备的Ag—Pd合金粉末的固溶合金化研究

根据Ｘ射线衍射原理，建立湿法冶金固溶合金粉末的定量测定方法，可用于电子浆料合金粉末的检测，相对误差在±０．０１２５。     

Research on graphite powders used for HTR-PM fuel elements

Different batches of natural graphite powders and electrographite powders were characterized by impurity, degree of graphitization, particle size distribution, specific surface area, and shape characteristics. The graphite balls consist of proper mix-ratio of natural graphite, electrographite and phenolic resin were manufactured and characterized by thermal conductivity, anisotropy of thermal expansion, crush strength, and drop strength. Results show that some types of graphite powders possess very high purity, degree of graphitization, and sound size distribution and apparent density, which can serve for matrix graphite of HTR-PM. The graphite balls manufactured with reasonable mix-ratio of graphite powders and process method show very good properties. It is indicated that the properties of graphite balls can meet the design criterion of HTR-PM. We can provide a powerful candidate material for the future manufacture of HTR-PM fuel elements.     

铜金粉的颜色及其影响因素

利用分光光度计对国内外铜金粉的颜色进行了测试，研究了铜金粉的成分、微观状态对颜色的影响。结果表明：铜金粉颜色可以用色彩三要素进行描述，其中铜金粉的色相只与合金成分有关，而与铜金粉片的大小、形状及粒度分布无关；明度和纯度与铜金粉片在油墨层中定向排列状态、片的大小、形状及粒度分布有关，而与成分无关；合金成分的微小波动不会引起铜金粉色相的明显改变。     

Mechanical activation-assisted electro-thermal explosion synthesis of the Ti2AlC phase

This study deals with the synthesis of the Ti₂AlC phase using the Electro-Thermal Explosion under Pressure with Confinement (ETEPC) technique. The effects of the ETEPC technique and the milling process parameters on the TiC_x phase content and the formation mechanism of the Ti₂AlC phase were investigated. The latter is mainly affected by the morphology of the powder mixture and aluminum melted amount. The optimization of the above parameters allowed the achievement of the desired reaction, leading to the formation of the Ti₂AlC phase with a purity of about 97?wt%. The results clearly demonstrate that the ETEPC process enables one to control both time and material synthesis temperature.     

智能车竞赛中道路的视频识别方案

视频信号的的采集和处理是一个复杂的过程,这需要程序设计者了解视频信号的构成,充分利用复合视频信号中的各种同步信息作为视频信号采集的控制信号,从而完成信号的采集。     

Identification and quantification of different vapours using a single polymer chemoresistor and the novel dual transient temperature modulation technique

This paper presents a novel signal processing technique for a square wave temperature modulated carbon black/polymer composite sensor. The technique consists of only two mathematical operations: summing the off- and on-transients of the conductance signals, and subtracting the steady-state conductance signal. The technique has been verified through its application to a carbon black/polyvinylpyrrolidone composite chemoresistor. Identification of water, methanol and ethanol vapours was successfully demonstrated using the peak time of the resultant curves. Furthermore, quantification of those vapours was found to be possible using the height of the peak heights, which was linearly proportional to concentration. The technique does not require zero-gas calibration and thus is superior to previously reported techniques.     

Application of functionalised carbon nanotubes immobilised into chitosan films in amperometric enzyme biosensors

A new approach for building a bio-conductive interface for enzyme immobilisation is described. This strategy permits very simple preparation of the enzyme biosensor and also reveals direct electron transfer features. A graphite-epoxy resin composite (GrEC) electrode modified with functionalised multi-wall carbon nanotubes (MWCNTs) immobilised by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide together with N-hydroxysuccinimide (EDC–NHS) in a chitosan (Chit) matrix was prepared and characterised by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) in the presence of hexaammineruthenium (III) chloride. It was then used as a base for glucose oxidase (GOx) immobilisation by the simple method of crosslinking with glutaraldehyde (GA) with bovine serum albumin (BSA) as carrier protein. The resulting mediator-free biosensor was applied to the determination of glucose in amperometric mode at different applied potentials and the mechanism of reaction was also investigated by cyclic voltammetry, with and without dissolved oxygen in solution. Analytical parameters, as well as reproducibility, repeatability and stability were determined. Interferences were assessed using different compounds usually present in natural samples, such as wines, juices or blood, in order to evaluate the selectivity of the developed biosensor. The novel combination of carbon nanotubes immobilised with chitosan crosslinked with EDC–NHS and glucose oxidase immobilised by crosslinking with glutaraldehyde offers an excellent, easy to make biosensor for glucose determination without interferences.