水对植物纤维水泥复合板生产的影响

研究了水对植物纤维水泥复合板性能的影响。选择合适的水分可以提高板材静弯曲强度,减小板材变形。     

New nanocomposite materials based on polymerization of [oligo(oxyethylene) methacrylates] in the presence of montmorillonite clay

Intercalation of poly[oligo(oxyethylene) methacrylates] onto sodium montmorillonite (MMT) clay has been investigated. A polymer–clay hybrid has been synthesized through intercalation of the monomer followed by its solution free‐radical polymerization. Eight polymer–clay hybrids were prepared using different weight ratios of clay, different oligo(oxyethylene) lengths and different proportions of crosslinker. Evidence of the development of nanostructures is obtained from scanning electron microscopy, and wide‐angle X‐ray diffraction studies support these results which show disappearance of the peak characteristic to d₀₀₁ spacing. In this hybrid MMT is dispersed homogeneously in the polymer matrix. © 2003 Society of Chemical Industry     

采用多模复合导引头提高反舰导弹突防能力

分析了现有反舰导弹制导体制的特点，提出了反舰导弹如采用被动微波／红外成像双模复合导引头，将是提高其突防能力的有力举措，同时提出了研制主被动／红外成像三模复合导引头的建议，并给出了三模导引头结构布局示意图。     

Nanocrystalline orthoferrite powders: Synthesis and magnetic properties

Nanocrystalline orthoferrite powders were synthesised at low temperatures by employing an aqueous sol–gel process. Colloidal sols and water re-dispersible gels of orthoferrite precursors were prepared by room-temperature processing of inexpensive metal salts. The average diameter (Z_av) of the precursor particles was in the size range from 4 to 7 nm; the diameters had a narrow size distribution. Water re-dispersible translucent gel monoliths were obtained by concentrating the aqueous sols followed by drying them under reduced pressure (10⁻² Torr) at room temperature. The sol–gel transition was found to be completely reversible. Nanocrystalline fine powders of orthoferrites of general formula, LnFeO₃ (Ln = La, Sm, Gd, Dy, Er, Yb and Y) having a crystallite size of about 25 nm were prepared by heating the gel precursors at 650–700 °C in air. Powder X-ray diffraction and thermogravimetry, respectively, were employed to identify perovskite phase formation and delineate thermal events that lead to gel to crystallite conversion. Magnetic measurements were carried out on the resultant powders at room temperature and down to 40 K. Nanocrystalline orthoferrite powders exhibited weak ferromagnetic behaviour, and reduced magnetic moments.     

Water and salt permeability of reinforcement polymer‐gel composite membrane

The charged mosaic polymer membrane (CMM) without reinforcement and the composite charged mosaic polymer membrane (CCMM) with reinforcement were investigated in terms of salt and water transport (permeability). The composite charged mosaic polymer membrane (CCMM) with reinforcement showed a unique transport behavior such as preferential material transport L_p and ω. Water permeability coefficient, L_p and salt permeability coefficient, ω were estimated by taking account of active layer thickness of composite polymer gel. The L_p and ω values of CCMM with reinforcement were larger than those of CMM without reinforcement. On the other hand, the reflection coefficient of CCMM, σ, showed negative value, which suggested preferential material transport to solvent transport. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

烧结硬化用低合金钢粉

本文将介绍三种不同成分的低合金钢粉。在混入2 0%铜和不同石墨含量的条件下,对该三种粉进行了试验评定。试件的密度为6 9g/cm3,在氮氢混合气氛中于1120℃下烧结25min,在炉内冷却带650～400℃温区的冷却速度为0 4或1 5℃/s条件下,对烧结态和回火后试件的力学性能进行了测试。回火条件为200℃下保温60min。在一定的冷却速率和碳含量条件下,各种钢粉烧结后的硬度可高达40HRC。回火后,硬度仍可以保持在30HRC以上。     

二次电池电极基板用复合多孔金属材料的研究

介绍了一种复合金属多孔体的制备及其方法，首先以泡沫塑料为芯膜，经过导电化处理使其具有导电性，其次进行电沉积金属铁，再进行电沉积金属镍，经过热处理后可制备出复合金属多孔体。该复合金属多孔体用铁取代金属镍，其抗拉性能优于单质泡沫镍，同时可以降低制造成本，主要用于载体如电池电极。     

综合线损分析系统研究

描述了综合线损分析系统应该具有的主要功能和分析内容，介绍了系统实现中应该注意的几个问题、系统内容和实现方法。     

Quantification of the layer dispersion degree in polymer layered silicate nanocomposites by transmission electron microscopy

As the performance of polymer layered silicate nanocomposites strongly depends on their interior layer dispersion, quantification of the layer dispersion degree is needed. In this work, a new methodology was developed to determine the dispersion parameter D_0.1, based on the measurement of the free-path spacing distance between the single clay sheets from the transmission electron microscopy (TEM) images. Several examples of exfoliated, intercalated, and immiscible composites were studied. It was found that the exfoliated composites had D_0.1 over 8%, while that of intercalated composites were between 4 and 8%. In the case of intercalation, a high frequency peak appeared at a short spacing distance in the histogram, which was a characteristic of the intercalation, distinct from the exfoliation. The main utility of this TEM methodology is for the quantification of exfoliated or intercalated samples with small number of layers with stacks. The dispersion parameter D_0.1 below 4% was suggested to classify as immiscible. A unique advantage of the TEM measurement is that the dispersion degree of different fillers can be counted individually.     

CFG桩复合地基在某高层建筑地基处理中的应用

结合具体工程实例,进行了CFG复合地基作为一种高层建筑地基处理方法的研究,对加固机理和设计步骤作了阐述,并对加固效果进行了检测分析,可供类似工程地基处理作参考。