利用金属络合物的电火花加工研究

在电火花加工的工作液中添加络合剂，使之与被蚀除的金属颗粒产生络合化学反应，生成可溶于工作液中的络合物。利用这种原理，可提高电火花加工性能，在小孔、深槽等加工应用中起到促进排屑的作用。     

大截面板簧和稳定杆的热处理改进

合理选择淬火冷却介质和确定零件的材料产品质量取于受控状态和确保产品质量的提高。     

基于数值模拟的接水盘冲压成形工艺分析与设计

分析了冰箱接水盘的形状和结构特点 ,设计了零件的冲压成形工艺 ,运用板料成形有限元软件对其中的拉伸和翻边工艺进行数值模拟 ,得到成形过程中工件各部位的厚度分布和成形极限图 ,分析了在不同工艺条件下可能产生的缺陷及其原因 ,并确定其初始毛坯和中间毛坯的合理形状 ,有效地保证了成形工艺的可靠性     

中厚板在线30通道超声波探伤方法及应用

介绍了柳钢公司在生产锅炉板、压力容器板过程中，曾试用了６种探伤方法；而研制的３０通道在线超声波探伤法不仅可满足国家标准要求，而且能适应生产节奏，并具有快速、准确、简便的特点。     

中厚板轧机工作辊失效分析及对策

介绍了济钢中厚板厂使用国外高镍铬和高铬工作辊的主要失效形式 ,并对该工作辊的断裂和裂纹产生原因进行了分析 ,同时针对所存在的问题提出了对策和具体改进措施。     

Banding formation and eutectic lamellar growth in directional solidified Ni50Al20Fe30 alloy

Banding formation and eutectic lamellar growth in a directionally solidified Ni₅₀Al₂₀Fe₃₀ alloy were investigated. It was found that the banding area consists of two layers. The first layer is a γ layer, while the subsequent one is a γ layer. The composition of various phases around the banding area changes with the solidification process. The banding is formed by two steps process and caused by factors such as the fractions during the sample growth process. It was found that the band was found at relatively low growth rate. Therefore. this study indicates that increasing the growth rate is an effective method to eliminate the band formation. Eutectic lamellae nucleate and grow again after the banding formation. During the initial transition lamellar growth, the relationship between the square lamellar spacing, γ₂, and the distance from, the banding, d, can be described by the following equation: γ₂ = K [1-exp(A.d)] where K and A are constant.     

混合室分配板成形工艺及模具设计

对混合室分配板零件介绍了一种落料拉伸成形和立体切沿分割的工艺思路以及模具结构和相关的理论计算 ,在实际应用中获得了好的效果。对同类形状产品 ,尤其是涉及到需要进行立体切沿分割的制件 ,可提供借鉴。     

复方降脂中药的性味归经与药效的BPNN研究

针对复方中药药效与其性味归经之间复杂的、不确定的关系,建立适于复方降脂中药的BP神经网络模型,运用Matlab快速预测复方降脂中药的药效指标。经验证,该方法为一种快速、可靠的方法。     

基于多目视觉的变形钢板三维测量方法

提出了一种使用4个相机测量变形钢板三维形状的方法;在没有纹理的钢板上画一些点,使用4个相机同时拍摄钢板;利用边缘检测算法找出钢板的边缘,利用特征点提取算法提取出4个图像中钢板上的特征点,并找到4个图像上精确的特征点匹配关系,然后测量出这些特征点的三维点;最后,以这些三维点为种子点向外区域增长,从而得到钢板的三维形状;实验对变形钢板进行三维测量,得到了钢板的精确的三维形状,结果验证了该方法的有效性和可行性。     

The thin plate spline robust point matching (TPS-RPM) algorithm: A revisit

This paper reviews the TPS-RPM algorithm (Chui and Rangarajan, 2003) for robustly registering two sets of points and demonstrates from a theoretical point of view its inherent limited performance when outliers are present in both point sets simultaneously. A double-sided outlier handling approach is proposed to overcome this limitation with a rigorous mathematical proof as the underlying theoretical support. This double-sided outlier handling approach is proved to be equivalent to the original formulation of the point matching problem. For a practical application, we also extend the TPS-RPM algorithms to non-rigid image registration by registering two sets of sparse features extracted from images. The intensity information of the extracted features are incorporated into feature matching in order to reduce the impact from outliers. Our experiments demonstrate the double-sided outlier handling approach and the efficiency of intensity information in assisting outlier detection.