Rendering of Surface and Volume Details in Volume Data*

Aiming at the detail rendering in volume data, a new volume illumination model, called Composed Scattering Model (CSM), is presented. In order to enhance different details in volume data, scattering intensity is decomposed into volume scattering intensity and surface scattering intensity with different weight functions. According to the Gauss probability distribution of gray and gradient of data, we propose an accurate method to detect the materials in a voxel, called composed segmentation. In addition, we discuss the principle of constructing these weight functions based on the operators defined in composed segmentation. CSM can generate images containing more details than most popular volume rendering models. This model has been applied to the direct volume rendering of 3D data sets obtained by CT and MRI. The resultant images show not only rich details but also clear boundary surfaces. CSM is demonstrated as an accurate volume rendering model suited for detail enhancement in volume data sets.     

一种便于观测的信号抽样及复原方法

利用倍频器，将重复频率与连续信号ｔ（ｔ）的频率相同的方波进行若干次倍频后，对连续信号进行抽样，从而获得离散的抽样信号ｆｓ（ｔ），再利用有源低通滤波器使其复原成连续信号ｆ（ｔ）。避免了一般抽样器不便于观测的缺点。     

小方坯连铸机的PLC自动控制

本文对弧型小方坯连铸机工艺与设备进行了分析，介绍了连铸生产的ＰＬＣ控制系统。及其软件设计。     

铅黄铜水平连铸棒材熔铸工艺的试验研究

在工业生产条件下，对影响HPb59－1水平连铸律材热轧开裂的熔铸工艺进行了试验研究．取三个熔铸工艺因素：铸造速度、冷却水压力、冷却水温度．试验结果表明；铸造速度对热轧开裂影响极为显著，使其控制在410mm／min左右可获得较为理想的效果．     

Phase equilibria of crude oils using the continuous thermodynamics approach

This paper deals with the application of continuous thermodynamics to light and heavy oil systems using the Peng- Robinson equation of state. The composition of the high molar mass components in a reservoir oil is described by a continuous distribution function of some characterizing quantity, e.g. molar mass or boiling temperature. Numerical Gaussian quadrature methods are used to generate pseudo-components and their mole fractions from distribution data. Several examples are presented for phase equilibria of solvent/crude oil systems. The results showed that semi-infinite distribution functions, such as the Γ function, cannot be applied to all cases, e.g. dew point calculations. The Gauss- Legendre quadrature method coupled with spline fitting worked best for heavy oil systems.     

Modeling and simulation of the drying of thin sheets in a continuous infrared dryer

The model gives the temperature and moisture distributions of the air, and of the moist sheet, as a function of time and distance in the dryer. The influence of the sheet's velocity and that of the radiant energy on the dryer performance as well as the effect of the moisture content of the entering sheet have been studied. A set of 27 experiments was carried out using the infrared dryer in order to calibrate the model. In these, the following three variables each had three operational levels: web velocity, initial web moisture and heating power. The model predictions agreed very well with the experimental data. Model predictions using arithmetic averages for the parameters, and parameters correlated with operational variables, are also presented and discussed.     

浅谈青钢“九五”发展思路

青钢应从我国钢铁工业的实际出发，在“九五”期间，遵循量力而行的原则，采取两步走的方法，于１９９８上和２０００年分别达到年产８３万ｔ和１１７万ｔ钢的综合生产能力。主要措施是：优化工艺结构，消除二次化铁炼钢；优化炼铁系统装备结构；推进炼钢技术进步，提高连铸比，并以市场为导向，优化产品结构。     

Mg-Li-Al合金近液相线制浆及部分重熔

采用近液相线铸造方法制备了Mg—5％Li—3％A1合金的半固态浆料。通过对该合金近液相线铸造与常规铸造组织进行比较，以及在不同静置时间、不同冷却速率下对其铸造组织的影响，较详细地分析了近液相线铸造组织的变化过程。试验结果表明，在Mg—Li合金熔炼中，添加2％Ca可实现阻燃，但效果不如对一般镁合金；与常规铸造相比，近液相线铸造可获得均匀、细小枝晶的组织结构；适当静置或提高冷却速率有利于组织的细化和均匀化；在适当的部分重熔工艺条件下，坯料组织可获得较理想的触变组织。     

铸型尼龙改性的研究进展

铸型尼龙产品广泛地用于各种机械零件，改性后的铸型尼龙，可克服其自身的缺点，满足工业应用的要求。文章就我国近年来在铸型尼龙改性研究方面的情况及不同的改性方法做了详细的介绍。