Bioactive compounds in rye flours with different extraction rates

Rye flours with extraction rate of 100% (wholemeal flour), 95% (brown flour), 90% (brown flour) and 70% (light flour) were prepared in order to study the relation between flour extraction rates and content of bioactive compounds. The following compounds were analysed: total phenolic compounds (TPC), total flavonoids (TF), inositol hexaphosphate (IP6), reduced (GSH) and oxidized (GSSG) glutathione, tocopherols (T) and tocotrienols (T3). The reduced/oxidized glutathione status (GSH/GSSG) of the flours was examined as a potential index of flour resistance against oxidative stress. The following observations were made in relation to the flour extraction rates and bioactive compounds contents: (a) milling process caused decrease in content in TPC, TF, IP6, GSH and GSSG, T and T3, (b) the most resistant against oxidation processes were suggested a brown flours, then light and finally wholemeal flour, (c) the ratio of tocotrienols to tocopherols (T3/T) was the highest in rye flours with extraction rate of 100–90% whereas light flour was the poorest source of tocopherols and tocotrienols. The provided data support current trend to increase number of rye products from wholemeal or brown flours.     

光学活性物质的工业生产方法

本文介绍了光学８活性牺牲垢几种工业规模的生产方法及最新的进展，分析了各种方法的特点及存在的问题。     

Characterization of CuInS2 thin films for solar cells prepared by spray pyrolysis

We have made a study of the chemical composition, the electrical, the optical and the structural properties of polycrystalline CuInS₂ thin films prepared by spray pyrolysis to be used for thin film solar cells. These films were deposited starting from aqueous solutions with different chemical compositions ([Cu]/[In] and [S]/[Cu] ratios) and at different substrate temperatures. In all cases, the material is p-type with grains preferentially oriented in the (112) direction of the sphalerite structure. The electro-optical properties show a very strong dependence on the [Cu]/[In] ratio in the solution. Films with copper excess have smaller resistivity and better crystallinity than those which are stoichiometric or have indium excess. The results obtained in this work show the possibility of having CuInS₂ thin films with a wide range of resistivity, a fact that could be important for making solar cells based on this material.     

Drying of persimmons (Diospyros kaki L.) and the following changes in the studied bioactive compounds and the total radical scavenging activities

Fresh persimmons were subjected to two different processes: sun-drying during 1 month and dehydration at 60 °C during 12 h. To assess the effect of this process on nutritional and health-related properties of persimmons dietary fibers, minerals, trace elements, polyphenols and the total radical scavenging activities (TRSAs) were determined before and after processing. It was found that the contents of dietary fibers, minerals and trace elements in fresh and dried persimmons fruits were comparable. Total polyphenols in fresh persimmons was higher than in dried fruits (1.3 vs. 0.9 and 0.8 mg/100 g FW, respectively) and percentage of inhibition was higher than in dried fruits (70% vs. 59% and 55% and 58% vs. 53% and 46% for 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2′-azino-bis (3-ethylbenzthiazoline-6-sulfonic acid) [ABTS] radicals, respectively (P>0.05 in all cases). In conclusion: (1) the differences in the contents of dietary fibers, minerals and trace elements in fresh and dried persimmons are not significant; (2) the contents of polyphenols and the level of the TRSA are higher in fresh persimmons than in dried fruits; however, both variables are also high in dried persimmons; (3) when fresh fruits are not available, proper dried persimmons could be used as a valuable substitute.     

Dual reaction capacity of hydrogenated nanodiamond

High temperature hydrogen stream treatment of nanodiamond was shown to produce nanodiamond with bifunctional surface. OH- and different CH-groups were shown to be the main functional groups on the surface. In this article we proposed two main strategies for further chemical modification of hydrogenated nanodiamond. OH-groups were shown to react with different types of acylating agents: anhydrides and chloranhydrides. Chlorination of hydrogenated nanodiamond with molecular chlorine and its subsequent treatment with alkyllithium reagents resulted in formation of alkyl-nanodiamonds. Chlorination was shown to reduce the size of nanodiamonds aggregates. We have also applied suspension-state NMR-H1 spectroscopy to study suspensions of alkyl-nanodiamonds for the first time.     

Influence of carbon introduced by arc melting on the structural and magnetic properties of RFe12−xVx (R = Y and Dy)

Carbon was introduced by arc melting into RFe_12−xV_x compounds, where R = Y or Dy and x = 2, 3 or 4, and its effects on the crystallographic and magnetic properties of these intermetallics were investigated by X-ray, magnetostatic and Mössbauer effect measurements. Experimental results show that the carbon atoms prefer the 4d sites to the 2b sites, or occupy the sites reserved for Fe atoms in the ThMn₁₂-type crystal structure. Carbon solution increases with increasing vanadium concentration, giving rise to an effect opposite to that of vanadium. An increase in vanadium content causes an increase in the cell volume and a linear decrease in Curie temperature and in the Fe magnetic moment, whereas the addition of carbon leads to a reduction in unit volume while maintaining a high T_c and enhancing the Fe magnetic moment despite decreasing iron content in the samples.     

Anaerobic digestion of alkaline black liquor using an up-flow anaerobic sludge blanket reactor

The anaerobic digestion of alkaline black liquor from a cereal straw pulping mill was studied in batch (serum bottles) and continuous systems (up-flow anaerobic sludge blanket reactor—UASB). The batch digestion studies confirmed that lignin and related compounds (LRC) in the alkaline black liquor were the main inhibitory substances and could not be decomposed by anaerobic bacteria. At organic loading rates of 5–10 kg COD m^?3 day^?1, the UASB reactor achieved 50–60% COD removal efficiencies. Gas production was 2–3 dm³ per dm³ of alkaline black liquor. Two different sludge types were examined in the reactor: granular and cluster-like sludges. Sludge in a cluster, which involved many small granules and flocs, tended to form larger aggregates and possessed good settling ability.     

On the synthesis and characterization of a new manganite type CMR material: La0.7Hg0.3MnO3

A new manganite type CMR material, La_0.7Hg_0.3MnO₃ has been successfully synthesized and has been found to exhibit magnetoresistance (≈9%) at low fields (≈1.5 kG). The synthesis has been carried out through a solid state reaction route consisting of the formation of La_0.7MnO₃ followed by diffusion of Hg leading to La_0.7Hg_0.3MnO₃. The as grown samples are polycrystalline and correspond to an orthorhombic unit cell with the lattice parameters; a=5.5183 Å, b=5.6383 Å and c=7.5368 Å. The typical grain size as revealed by scanning electron microscopy is in the range of 0.5–2 μm. The ρ–T behaviour shows a peak at T_IM=227 K. The ρ–T behaviour above this temperature corresponds to that of an insulator and below this to that of a metal. The ρ–T behaviour remains unaltered when a magnetic field (H_dc=1.5 kG) is applied. However, with this magnetic field a drop in the resistivity is observed up to 77 K. At room temperature the magnetoresistance ratio (MRR) is too small but it steadily increases as the temperature is decreased. Thus, MRRs at 227.13 and 77 K are 3.41 and 9.05%, respectively, in an applied field of H_dc=1.5 kG. At a given temperature the variation in MRR with field H_dc is rapid at lower field values (H_dc<1.2 kG) and scales linearly for higher field values (H_dc>1.2 kG). It may be mentioned that the present work on the synthesis and magnetoresistance behaviour of La_0.7Hg_0.3MnO₃, is the first of its type.