ZL205A高强度铝铜合金的铸造及热处理

探讨了ＺＬＮ２０５Ａ高强度铝铜合金的铸造性能和热处理工艺方法，阐述了ＺＬ２０５Ａ铝铜合金在Ｔ５热处理时，如何才能达到机械性能的工艺方法。     

钨铜化合物氢还原制备钨铜复合粉研究

通过对钨铜化合物氢还原过程进行热力学分析,找到了制备均匀细颗粒钨铜复合粉的热力学途径--彻底快速除去还原系统中的水分.设计了封闭还原系统,用此系统进行氢气热还原,不仅使氢气得到充分利用,而且容易判断反应终点.通过系统内的特殊装置除水,降低了还原温度,在600℃下还原得到了混合均匀的钨铜复合粉.系统能彻底快速除去反应生成的水分,使反应物的湿度大大降低,确保得到细颗粒的钨铜复合粉,其平均粒径小于80nm.     

Structure factors of modified liquid Al–Si alloys

The structure factor and the coordination numbers of liquid Al–Si alloys with different Si content have been measured by a high temperature X-ray diffractometer. Radial distribution functions (RDFs), the nearest atomic distance and the coordination numbers of eutectic Al–Si alloys before and after being modified with Sr and Sb were studied. The RDFs of the liquid alloy were decomposed by five Gaussian peaks. The results show that a Si–Si covalent bond exists in the liquid of eutectic and hyper-eutectic alloys. Sr in the liquid Al–Si has a capability to weaken the covalent bonds of Si–Si, suppressing the nucleation of the eutectic silicon phase. On the other hand, Sb in the liquid Al–Si increases the order degree of Si atoms, decreasing the supercooling degree of the nucleation and promoting the nucleation of eutectic silicon.     

CtpB Facilitates Mycobacterium tuberculosis Growth in Copper-Limited Niches

Copper is required for aerobic respiration by Mycobacterium tuberculosis and its human host, but this essential element is toxic in abundance. Copper nutritional immunity refers to host processes that modulate levels of free copper to alternately starve and intoxicate invading microbes. Bacteria engulfed by macrophages are initially contained within copper-limited phagosomes, which fuse with ATP7A vesicles that pump in toxic levels of copper. In this report, we examine how CtpB, a P-type ATPase in M. tuberculosis, aids in response to nutritional immunity. In vitro, the induced expression of ctpB in copper-replete medium inhibited mycobacterial growth, while deletion of the gene impaired growth only in copper-starved medium and within copper-limited host cells, suggesting a role for CtpB in copper acquisition or export to the copper-dependent respiration supercomplex. Unexpectedly, the absence of ctpB resulted in hypervirulence in the DBA/2 mouse infection model. As ctpB null strains exhibit diminished growth only in copper-starved conditions, reduced copper transport may have enabled the mutant to acquire a “Goldilocks” amount of the metal during transit through copper-intoxicating environments within this model system. This work reveals CtpB as a component of the M. tuberculosis toolkit to counter host nutritional immunity and underscores the importance of elucidating copper-uptake mechanisms in pathogenic mycobacteria.     

全层片状TiAl基合金断裂过程的原位观察

利用ＳＥＭ拉伸台，研究了Ｔｉ－３３Ａｌ－３Ｃｒ－０．５Ｍｏ合金的室温拉伸断裂动态过程。试验结果表明，具有全层片状显微组织的ＴｉＡｌ合金室温断裂韧性较高，归因于合金拉伸过程中裂纹尖端发生分叉致使应力松弛而使裂纹钝化；在变形过程中，主裂纹尖端附近的微裂纹之间形成剪切韧带，剪切韧带韧化是ＴｉＡｌ合金的一种韧化机理。     

Phase equilibria in the Au–In–Sn ternary system

Phase equilibria of the Au–In–Sn system have been investigated by Differential Scanning Calorimetry (DSC), metallographic examination, Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) measurements. The 130 ^°C isothermal section of the phase diagram was studied. The ternary diagram shows six three-phase fields, and one ternary Au₄In₃Sn₃ phase, which melts incongruently at 382 ^°C and shows a homogeneity range between 21 and about 30 at.% In, at constant Au/Sn ratio.     

双余度无刷直流电动机驱动电流非均衡状况的研究

双余度无刷直流电动机由于具有较高的安全性和容错性,已广泛应用于电力作动器等关键电力系统中.由于器件以及电机制造上的各种因素,两个电气余度的参数不会完全一致,电流出现不均衡的情况,将导致电机铜损的剧增、散热条件的恶化以及输出转矩的较大波动,影响到双余度电机性能的发挥.通过对双余度无刷直流电动机铜损以及转矩波动的分析,得出了电流不均衡情况下电机铜损变化规律和转矩波动规律,并通过样机验证了理论分析结论.     

含能催化复合纳米材料的制备研究

亚铬酸铜是促进复合固体推进剂中高氯酸铵分解的一种很好的催化剂,但由于以往制备的亚铬酸铜及高氯酸铵超细微粒易发生团聚,不能有效地对高氯酸铵的分解起催化作用。本文使用高能球磨法,使纳米级亚铬酸铜嵌入或粘附于高氯酸铵晶体表面而形成复合粒子,因而大大地提高了对高氯酸铵的催化效果,使高氯酸铵的热分解反应温度区间明显前移,热分解反应的激烈程度大大提高     

新型芳香二胺的合成及其聚酰亚胺的应用研究

首先通过双酚A和碳酸钾反应得到酚钾盐,与间-二硝基苯反应合成2,2-双[4-(3-硝基苯氧基)苯基]丙烷(3-BNPP),再用水合肼还原得到新型芳香二胺单体2,2-双[4-(3-氨基苯氧基)苯基]丙烷(3-BAPP)。用3-BAPP与多种二酐合成出多种聚酰亚胺,并在二层法挠性覆铜板(2L-FCCL)的应用方面做了一些研究。研究表明其相应的2L-FCCL具有良好的耐锡焊性能和较低的吸水率。