罐装食品用电镀锡板的耐蚀性及其试验方法

综述了影响罐装食品用电镀锡板耐蚀性能的因素及其试验方法。     

正交异性矩形薄板的稳定性分析

本文求得了正交异性矩形薄板屈曲位移函数微分方程的一般解。可用以求解任意边界矩形板的稳定问题。以两邻边简支，另两边自由的正方形板为例进行了计算。     

Change in Availability of Mineral and Raw Material Resources as a Result of Scientific and Technical Progress

The tendencies characterizing worsening of natural, mining and technical, as well as mining and geological conditions of deposit mining are analyzed for the last 100 years. The change in prices for mineral raw material is shown, and the influence exerted by scientific and technical progress in the sphere of mining and processing of copper-containing ores is established. An approach to the estimate of available mineral reserves and possibility of their involvement in mining is stated.     

Some aspects of the electrochemistry of the flotation of pyrrhotite

The iron sulfide mineral, pyrrhotite (Fe_(1–x)S), has long been known to be more difficult to recover by flotation from alkaline slurries than many other base metal sulfide minerals. This paper summarizes the results of an electrochemical study of the surface reactions that occur during the flotation of nickeliferous pyrrhotite in the recovery of nickel and the platinum group metals. Mixed potential measurements conducted with natural pyrrhotite electrodes in various stages of an operating flotation plant showed that the mineral potential is positive to the equilibrium potential of the xanthate/dixanthogen couple. Similar results were obtained during batch flotation experiments and in synthetic solutions in the laboratory. Cyclic voltammetric and potentiostatic current/time transient experiments were used to investigate the oxidation of pyrrhotite under various conditions. In addition, the reduction of oxygen, the reaction of copper ions and the oxidation of xanthate ions at the mineral surface were investigated. The formation of dixanthogen on pyrrhotite surfaces is thermodynamically favourable in plant flotation slurries. However the interaction with xanthate at pH values above 7 is inhibited by a surface species formed during the conditioning prior to xanthate addition. In acidic solutions copper ions react readily with pyrrhotite to form a species, possibly CuS that can be oxidized at potentials above 0.4 V. At pH 9 this species does not form and there is no electrochemical reaction between pyrrhotite and copper ions. The beneficial effects of copper ions to flotation performance appear to be related to an enhancement of the oxidation of xanthate.     

氨荒酸盐抑制铜在NaCl溶液中腐蚀的电化学研究

通过电化学极化曲线和失重实验,研究了氨荒酸盐对铜在氯化钠溶液中的缓蚀性能,并与相应胺的缓蚀性能进行了对比。结果表明:氨荒酸盐对铜具有较好的缓蚀性能。     

中厚板汽雾冷却技术的开发及应用

为解决济钢中板厂冷床能力不足问题，对汽雾冷却系统的技术原理、系统组成进行了研究及实际应用；应用汽雾冷却系统后，在保持钢板组织和力学性能不受影响的前提下，提高了钢板的降温速度，加快了生产节奏；经汽雾冷却的钢板，表面氧化层减薄1／2。     

Bacteriological Safety of Swine Carcasses Treated with Reconditioned Water

Swine carcass microflora were evaluated for selected foodborne pathogens after exposure to reconditioned water during scalding, dehairing, and polishing operations. Reused water had been reconditioned and chlorinated. Rodac plates applied to hams were used to assess carcass microflora. Water samples were enumerated using membrane filtration or spiral plating. Sampling was at mid-week throughout the year. Total aerobic plate counts on hams were unaffected by treating with potable or reconditioned waters. No differences were observed for staphylococci, enterics, fecal streptococci, Listeria monocytogenes, coliforms, and Aeromonas levels. A preevisceration potable water carcass wash reduced the bacterial load, regardless of initial treatment. Bacterial counts on carcasses paralleled those in water. Reuse is an alternative to potable water for initial slaughter operations without diminishing bacteriologic safety.     

济钢中板工艺技术结构的优化

济南钢铁厂于１９８８年进行了增建４辊精轧机和增设３号加热炉为主体的中板工艺技术改造，在生产中对原料生产、中板轧制、精整等工艺技术结构进行了一系列优化组合，取得了良好的效果。为了适应市场需求将继续对中板进行工艺技术结构优化，调整产品结构。     

关于离散Kirchhoff薄板单元的研究

本文对离散Kirchhoff薄板单元进行了深入的分析。文中将用于建立离散Kirchhoff单元的泛函分为三部分,分别用应变第一不变量、绕Z轴的转动偶和有关的单元边界上的积分来表达,并阐明了各部分的作用。其中单元的收敛性质完全由第一、三部分所决定,而第二部分则控制了单元的计算精度。在此基础上,文中建议了一种提高离散Kirchhoff单元精度的新方法,并由此推导了一个任意四边形离散Kirchhoff单元。计算表明,本文的改进单元与原来的离散Kirchhoff单元及其改进型相比,计算精度有了显著提高。     

Buckling analysis for delaminated composites using plate bending elements based on higher‐order zig‐zag theory

A finite element based on the efficient higher‐order zig‐zag theory with multiple delaminations is developed. The bending part of the formulation is constructed from the concept of DKQ element. Unlike conventional elements, a developed element has its reference in the bottom surface which simplifies zig‐zag terms on formulation. Exact patch solutions are developed on elements which have the bottom reference system. The present element passes proper bending patch tests in the arbitrary mesh configurations in isotropic materials. Zig‐zag formulation is adopted to model laminated plates with multiple delaminations. To assess the accuracy and efficiency of the present element based on higher‐order zig‐zag theory with multiple delaminations, the linear buckling problem of laminated plates with multiple delaminations has been analysed. The results have been compared with three‐dimensional elasticity solutions. The present element works as an efficient tool for analysing the behaviour of the laminated composites with multiple delaminations. Copyright © 2002 John Wiley & Sons, Ltd.