C－BN衬底上金刚石的异质外延生长研究

用热灯丝ＣＶＤ方法在Ｃ－ＢＮ单晶衬底上制备出金刚石膜，并且在Ｃ－ＢＮ（１００）面上观察到金刚石的异质外延。     

铜冶炼系统节能降耗与余热利用前景分析

大规模铜冶炼系统的技术改造,可在短期内改变铜厂的面貌,快速提升产品产量,大幅降低铜冶炼的能耗,如何能更深层次地利用好余热资源,是我们研究和发展的方向。     

印制板蚀刻、微蚀刻废液的再生和铜回收的技术及设备

传统的印制板蚀刻废液处理方法存在着工艺落后、操作不便、二次污染、效益不高等问题,本工艺采用特殊的萃取电解、吸附电解技术,使蚀刻废液得以再生循环利用,铜得以100%回收,低含铜废水铜得到98%回收,整个系统不产生二次污染,获得的铜为高纯度铜板,在实现污染控制的同时,废液废水得到了资源化利用。     

InGaAsP／InP PFBH激光器

采用Ｎ－ＩｎＰ衬底研制ＩｎＧａＡｓＰ／ＩｎＰ激光器和ＤＦＢ激光器在国内已报导过多次，本文介绍用Ｐ－ＩｎＰ衬底研制ＩｎＧａＡｓＰ／ＩｎＰ平面埋层异质结构激光器和ＤＦＢ－ＰＦＢＨ激光器，同时利用晶体生长和晶向的依赖关系，改进埋区的结构，使器件最高激射温度大于１００℃。     

α－Al_2O_3衬底上生长的GaN膜的光学性质

采用金属有机化学气相淀积（ＭＯＣＶＤ）方法生长了α－Ａｌ２Ｏ３衬底上外延的高质量的单晶ＧａＮ薄膜。Ｘ射线衍射光谱与喇曼散射光谱表征了ＧａＮ外延薄膜的单晶结构和单晶质量。透射光谱和光调制反射光谱定出了六角单晶ＧａＮ薄膜的直接带隙宽度和光学参数。     

草酸二甲酯加氢合成乙二醇反应的研究

在微型管式反应器中,采用Cu/SiO2催化剂,在温度190～210℃、压力1～3MPa、草酸二甲酯(DMO)与氢气的摩尔比(氢酯比)40～120、DMO空速6.0～25.0mmol/(g.h)的条件下,对DMO加氢制乙二醇的反应进行了研究。实验结果表明,高温、高压、高氢酯比和低DMO空速都能提高DMO的转化率和乙二醇的收率,但同时也增加了副产物的选择性。较适合的反应条件为:压力2MPa,温度205～210℃,氢酯比80～100,DMO空速10.0mmol/(g.h)。动力学研究表明,DMO加氢反应符合Langmuir-Hinshelwood吸附反应动力学模型,表面反应为速率控制步骤,氢气不解离吸附,由此得到了相应的动力学方程及参数。统计检验结果表明,该模型对DMO加氢反应高度适定。     

应用遥感图像分析九江瑞昌地区构造与金铜成矿的关系

九瑞地区是长江中下游重要的金铜成矿区,遥感图像分析认为,北东东向断裂是主要的控矿构造,与北西向断裂的交汇部位是金铜成矿的有利地段。此外,环形构造又是另外一种控矿构造,目前所发现的金铜矿床均有物化探异常显示,并形成于环形构造的边缘。     

高铅硫化铜精矿的二段焙烧

高铅硫化铜精矿进行湿法铜铅分离时，焙烧过程因有低熔点组份产生，使培砂中铜浸出率仅为73％～82％，达不到工艺要求。经二段焙烧后消除了上述影响，铜浸出率达到97．4％，实现了铜铅分离。     

A review of the linear term in the low-temperature specific heat of La2CuO4 and La2?xMxCuO4 (M = Ba, Ca, Sr)

In this report I will summarize the results of an extensive review of the low-temperature specific heat of the La-based high-temperature superconductors, withT _c between 30 and 40 K, and the related nonsuperconducting compound La₂CuO₄. There have been two previous studies by Fisheret al. [1] and Fischeret al. [2] which also reviewed the low-temperature specific heat of these materials. This work was undertaken to extend a similar study of the 90 K superconductor YBa₂Cu₃O_7– which we recently completed [3]. This review will focus exclusively on the low-temperature specific heat and will update the previous studies by including recent results.     

Efficient design of SIW filters with knowledge‐embedded space mapping technique

This article presents an optimization technique for the design of substrate‐integrated waveguide (SIW) filters using knowledge‐embedded space mapping. An effective coarse model is proposed to represent the SIW filter. The proposed coarse model can be analyzed in the available commercial software ADS. The embedded knowledge includes not only formulas but also extracted design curves, which help to build the mapping between the coarse and fine models. The effectiveness of the proposed method is demonstrated through a design example of a six‐pole SIW filter. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.