Development and Commercial Application of a Novel Catalyst DVR—1 for Catalytic Cracking of Daqing Vacuum Residue

A newly developed catalyst type DVR-1 for catalytic cracking of Daqing vacuum resid was put into use in a commercial VRFCC unit,This catalyst features uniquely active matrix and modified ultra-stable zeolite.The commercial application results show that the DVR-1 type catalyst has the advantage of high heavy oil conversion,good metal tolerance nd gooed stability for catalyst regeneration,The FCC tests have shown Favorable product distribution,acceptable product quality and enormaous economic benefits whe processing the feedstock containin 75%-100% Daqing VR.     

Determination of Discrete-Structure Parameters of Coatings with Allowance for Residual Stresses

The authors suggest that the dimensions of a discrete section of a coating should be chosen on the basis of calculation of the critical crack spacing in cohesion cracking. This approach allows for residual stresses in the coating. The reliability of the calculation method has been verified experimentally by direct measurement of the crack spacing.     

纤维素的辐射裂解及其化学性质

纤维素经高能射线辐照,能产生一系列的化学和物理性质的变化。本文报道在不同剂量的~(60)Coγ射线辐照下,稻草中的水溶性糖、易水解糖、难水解糖,以及氨基酸、蛋白质等物质的化学变化;用辐射与加泡涨剂相结合的方法处理稻草,可以降低剂量、提高效应。     

催化裂化原位降硫助剂的制备及其性能研究

采用溶胶-凝胶法制备具有介孔结构的降硫基质材料，选择具有降硫选择性的活性元素对合成的基质材料进行改性处理，考察不同的改性方法对制得的催化裂化原位降硫助剂性能的影响，并对基质材料和降硫助剂的结构进行表征。采用美国进口的ACE-R小型催化裂化评价装置将降硫助剂与催化裂化催化剂匹配进行性能评价，在不改变原催化裂化产品分布和产品性质的同时，降低原料的总硫含量，总硫降低可达40％以上。     

催化裂化技术现状及发展趋势

详述了国内外最新渣油催化裂化、多产柴油催化裂化、低碳烯烃催化裂化、生产清洁燃料催化裂化及催化剂的技术进展，同时根据我国实际情况对今后催化裂化技术的发展提出了建议。     

Prediction of the energy dissipation rate in ductile crack propagation

In this paper, energy dissipation rate D vs. Δa curves in ductile fracture are predicted using a ‘conversion’ between loads, load‐point displacements and crack lengths predicted by NLEFM and those found in real ELPL propagation. The NLEFM/ELPL link was recently discovered for the DCB testpiece, and we believe it applies to other cracked geometries. The predictions for D agree with experimental results. The model permits a crack tip toughness R(Δa) which rises from J_c and saturates out when (if) steady state propagation is reached after a transient stage in which all tunnelling, crack tip necking and shear lip formation is established. J_R is always greater than the crack tip R(Δa) and continues to rise even after R(Δa) levels off. The analysis is capable of predicting the usual D vs. Δa curves in the literature which have high initial values and fall monotonically to a plateau at large Δa. It also predicts that D curves for CCT testpieces should be higher than those for SENB/CT, as found in practice. The possibility that D curves at some intermediate Δa may dip to a minimum below the levelled‐off value at large Δa is predicted and confirmed by experiment. Recently reported D curves that have smaller initial D than the D‐values after extensive propagation can also be predicted. The testpiece geometry and crack tip R(Δa) conditions required to produce these different‐shaped D vs. Δa curves are established and confirmed by comparison with experiment. The energy dissipation rate D vs. Δa is not a transferable property as it depends on geometry. The material characteristic R(Δa) may be the ‘transferable property’ for scaling problems in ELPL fracture. How it can be deduced from D vs. Δa curves (and by implication, J_R vs. Δa curves) is established.     

Improvement in Stress Corrosion Crack Growth Resistance of an Austempered Cast Steel by a Novel Two-Step Austempering Process

An investigation was carried out to examine the influence of microstructure on the stress corrosion cracking (SCC) growth behavior of an austempered high-carbon (1.00%), high-silicon (3.00%), and high-manganese (2.00%) cast steel. Compact tension specimens were prepared from this cast steel as per American Society for Testing Materials standard E-399 and were given four different heat treatments to produce different microstructures. The SCC behavior of these specimens was studied in 3.5% NaCl solution. The test results indicate the K_ISCCvalue of the material increases as the austenite content increases. Significant improvement in SCC resistance was achieved by using a novel two-step austempering process. Intergranular crack growth was observed in all these specimens.     

乙烯装置失效模式分析及基于风险的检验

简述了乙烯装置的工艺流程,分析了装置中常见的几种失效模式及其分布;以乙烯裂解装置为例,简述了RBI的执行过程和结果,从基于风险的检验理念,对制订设备检验策略提出了几点建议。     

乙烯裂解炉辐射炉管施工技术

乙烯裂解炉辐射炉管的施工比较复杂,文章结合吉林石化分公司15万t／a乙烯装置节能改造项目的施工实践,介绍了辐射盘管系统施工的准备工作、辐射盘管组装顺序、集管箱开孔及组焊、猪尾管预制安装、辐射盘管吊装等方面的施工经验。     

建(构)筑物机械拆除方法综述

介绍了几种常用的建(构)筑物机械拆除方法,对其工作原理、特点、应用条件及局限性加以分析和说明。