BP网络模型对人脸朝向的识别

研究BP神经网络模型,通过计算机模拟人脑建立神经元网络,使用一部分人脸朝向信息作为训练的实例集,训练稳健后,可以推广应用判断其他人脸的朝向信息,以实现计算机自动识别人脸朝向。先对图片进行归一化等预处理,再应用主成分分析提取特征信息,每幅提取出的特征信息都是8个数据的列向量,构建一个8个输入、17个隐含、3个输出的三层BP网络模型。将训练实例集的特征向量代入训练,调整参数后保证其性能和收敛速度。最后通过大量实验验证,计算机识别的误判率仅为6.7%,模型可靠。     

煤炭企业信息化建设问题探讨

企业信息化作为国民经济信息化的基础,是当前推进国民经济信息化的重中之重。伴随全球信息化浪潮,我国煤矿企业信息化进程不断向深度和广度双向推进,但依然存在一些不尽人意的地方。本文首先分析了煤矿企业信息化的现状和制约信息化的原因,在此基础生展望了煤矿企业信息化的发展方向。     

石英晶体振荡器的微处理器温度补偿技术研究

为改善石英晶体振荡器的频率特性,减小温度影响,通过对石英晶体振荡器的频率-温度特性的研究,提出了以微处理器（STC89C52RC）为核心的基于AT切晶体谐振器的温度补偿技术,并介绍了系统结构、补偿原理及硬件电路,给出了补偿结果。本设计具有结构简单、功耗低等优点。     

Low‐voltage and high‐transmittance blue‐phase liquid‐crystal device with slanted electrodes

Abstract— A low‐voltage (～10 V_rms) and high‐transmittance (～90%) polymer‐stabilized blue‐phase liquid‐crystal (BPLC) device with a slanted‐electrodes structure is proposed. Unlike the vertical‐field‐switching (VFS) mode in which oblique incident light and a vertical field are employed, the proposed device utilizes normal incident light and an oblique field. The slanted electrodes generate a strong and uniform oblique electric field, which contributes in obtaining low voltage and high transmittance. Moreover, no couple films or prism sheets are needed, which helps to enhance the optical efficiency and simplify of the device structure. This device has great potential application for emerging BPLC displays and photonic devices.     

Evaluation of contrast metrics for liquid‐crystal displays under different viewing conditions

Abstract— A psychophysical experiment was carried out to assess the perceptual contrast on a large‐sized liquid‐crystal display (LCD) under nine phases of viewing conditions. Based on the results, six contrast models employing different color attributes or the index of just‐noticeable difference (JND) were developed. Their performances were also tested by the visual data of the nine phases, which indicated that the model C_Q employing CIECAM02 brightness gives the best performance in predicting visual data under different viewing conditions among those models. A preprocessing step was also proposed to utilize the contrast model C_Q conveniently in the practical contrast evaluation of LCDs.     

Aluminum. II. Derivation of C v0from C p and comparison to C v0 calculated from anharmonic models

The specific heat at constant pressure, C _p, of aluminum measured by Ditmars, Plint, and Shukla has been reduced to the volume V ₀ appropriate for 0 K employing the Murnaghan equation. The C _v0 thus obtained is compared with the theoretical C _v0 calculated in the harmonic and the lowest-order anharmonic approximation from three different pseudopotentials (Harrison, Ashcroft, and Dagens-Rasolt-Taylor) as well as a phenomenological Morse potential. The higher-order ( ⁴) anharmonic contributions are calculated from the same nearest-neighbor Morse potential as in the lowest-order anharmonic theory. The role of the vacancy and the higher-order anharmonic contributions to C _v0 has been examined and we conclude that the ⁴ contributions to C _v0 are much smaller than the vacancy contribution. After removal of the vacancy contribution, the reduced C _v0 is found to be in excellent agreement with the Ashcroft and Harrison pseudopotentials as well as the Morse potential including the ² and ⁴ contributions to C _v0.     

低碳钢显微结构的EBSD表征

近年来,新开发的电子背散射衍射技术将多晶材料的显微组织、微区成分与结晶学数据分析联系起来,能对晶界类型、取向、位向差和结构及其分布进行观察、统计测定和定量分析,从而建立了晶界结构、取向和织构等与多晶材料性能的定量和半定量关系,成为现代材料研究的重要实验技术。笔者结合低碳钢生产中的一些实际问题,扼要介绍了电子背散射衍射技术中的晶体取向图在多晶材料显微结构表征中的应用。     

Effective DOA Estimation Under Low Signal-to-Noise Ratio Based on Multi-Source Information Meta Fusion

Efficiently performing high-resolution direction of arrival (DOA) estimation under low signal-to-noise ratio (SNR) conditions has always been a challenge task in the literatures. Obvi-ously, in order to address this problem, the key is how to mine or reveal as much DOA related in-formation as possible from the degraded array outputs. However, it is certain that there is no per-fect solution for low SNR DOA estimation designed in the way of winner-takes-all. Therefore, this paper proposes to explore in depth the complementary DOA related information that exists in spa-tial spectrums acquired by different basic DOA estimators. Specifically, these basic spatial spec-trums are employed as the input of multi-source information fusion model. And the multi-source in-formation fusion model is composed of three heterogeneous meta learning machines, namely neural networks (NN), support vector machine (SVM), and random forests (RF). The final meta-spec-trum can be obtained by performing a final decision-making method. Experimental results illus-trate that the proposed information fusion based DOA estimation method can really make full use of the complementary information in the spatial spectrums obtained by different basic DOA estim-ators. Even under low SNR conditions, promising DOA estimation performance can be achieved.     

Simulation of polycrystalline aluminum tensile test with crystal plasticity finite element method

The crystal plasticity was implemented in the finite element method（FEM） software ABAQUS through the user subroutine UMAT. By means of discretizing the space at the grain level with the Voronoi diagram method, a polycrystal model was built and used in the FEM analysis. The initial orientation of each grain was generated based on the orientation distribution function（ODF）. The developed model was successfully applied in simulation of polycrystalline aluminium samples deformed by the tensile tests. The theoretical strain--stress relation was in good agreement with the experimental result. The simulation results show that the grain size has significant effect on the deformation behavior. The initial plastic deformation usually occurs at grain boundaries, and multiple slip often results in an enhanced local hardening at grain boundaries.