Full scale investigation of GCL damage mechanisms in small earth dam retrofit applications under earthquake loading

This paper reports results of full scale testing to further explore potential GCL damage mechanisms in earth dam retrofit applications in seismically active areas; in particular, to a) investigate whether shear displacements could reduce the magnitude of GCL panel overlap during earthquake shaking; b) explore the influence of gravel particles on GCL thickness at localised point of contact; and c) observe the consequences of an accidental exposure of an uncovered GCL to short duration rainfall in terms of moisture content and effects during subsequent compaction. The results of these experiments indicate that even under severe shaking no movements were detected at the GCL panel overlap. Whereas gravel particles were observed to locally reduce the thickness of the GCL to 2.2 mm, no plowing of the particle into the GCL occurred due to a lack of shear displacement at the interface, resulting in no localised internal erosion through the barrier. Furthermore, hydration of GCL panels during construction due to surface wetting was observed to result in a state of hydration less than its post-construction state. These results indicate that although each of the three GCL damage mechanisms cannot be ruled out to ever be relevant in practice, the performance of the GCL retrofitted earth dam tested was satisfactory under even severe Level 2 earthquake shaking, and suggests that the retrofitting of small earth dams with GCLs is a promising strategy to improve their static and seismic resistance.     

Stagnation flow of hybrid nanoparticles with MHD and slip effects

The flow of hybrid nanoparticles with significant physical parameters with different base fluids in the presence of Biot number, velocity slip, and MHD effects has not been explored so far, particularly for a circular cylinder. Therefore, the current report is presented to offer a numerical solution for hybrid nanoparticles with base fluids (water and ethylene glycerol) via a circular cylinder. The physical situation is interpreted in terms of partial differential equations and is converted into ordinary differential equations after applying the similarity transformation. The results are presented in both tabular and graphical forms. The impact of physical parameters on velocity distribution is examined through graphs. The comparative results of hybrid nanoparticles for distinct base fluids as ethylene glycol and water are proposed and the hybrid nanoparticles with base fluid water seems to be greater than that of the hybrid nanoparticles with base fluid EG. The temperature profile of hybrid nanoparticles is found to be a decreasing function with growth in velocity slip parameter but an opposite trend is noted in case of nanoparticles . The skin friction and Nusselt number augmented for the increase in magnetic field, velocity slip, and nanoparticle while it shows a decreasing trend toward thermal slip parameter. For the both cases, improvement in Biot number helps enhance the heat transfer constantly.     

考虑流固耦合的Spar型浮式风力机涡激运动特性研究

对弹性支撑单圆柱在均匀流作用下的涡激运动特性进行数值模拟,捕捉到"锁定区"、"拍"、"频率变换"等现象。柱体周围流场采用Fluent求解,将4阶Runge-Kutta方法代码写入用户自定义函数(UDF)求解运动微分方程,运用动网格技术更新流场,实现圆柱与流场的非线性耦合作用。发现随着折合速度的增大,涡激运动响应可分为锁定前支、锁定区、锁定后支3个阶段,在进入锁定区前(折合速度Ur=3)横向运动响应发生拍现象,当跨过锁定区后(折合速度Ur=10)发生频率变换现象。结果表明,横向涡激运动有较大范围的频率锁定现象,频率解锁前后圆柱涡激运动轨迹由"右8字"形变换为"左8字"形。     

Bluff body with built-in piezoelectric cantilever for flow-induced energy harvesting

This paper investigates a flow-induced vibration energy harvester comprising a piezoelectric beam (piezo-beam) installed within a hollow circular cylinder. Under the flow excitation, the energy-harvesting system including the cylinder and the piezo-beam vibrates and generates electricity. A lumped parametric model incorporating the fluid-structure interaction (FSI) is developed to evaluate the performance of the proposed energy harvester. Based on the theoretical analysis, several guidelines on the design and optimization of the proposed energy harvester are provided. Subsequently, a numerical model is used to simulate the FSI between the proposed system and the external flow field. Finally, a physical prototype is fabricated and an experiment is conducted to test the actual performance for validation. The theoretical analysis results are verified by the numerical and experimental results.     

WinGD 6RT-Flex50D主机使用合规低硫燃油拉缸实例分析

IMO的全球船舶限硫新规已生效，选择燃用合规低硫燃油来应对法规要求的船舶正面临着新型燃油带来的诸多挑战。针对某在航船舶首次使用合规低硫燃油时出现的主机严重拉缸问题，经全面分析拉缸的可能原因，最终确认系所用的某批次合规低硫燃油带入了一定的污染物，致使燃油发火性能变差，最终导致主机拉缸。为了保证船舶继续安全航行，对该问题燃油的使用提出了相应方案。实际应用表明:该方案行之有效，为其它船舶安全使用合规低硫燃油提供了参考。     

Effect of biopolymers on permeability of sand-bentonite mixtures

Application of biopolymer-modified geomaterials in waste disposal practices is gaining wide acceptance due to their superior tensile characteristics and improved crack resistance. Permeability is an important design parameter which determines the suitability of a material as a liner for construction of engineered landfills. Given this, the permeability characteristics of sand-bentonite mixtures amended with biopolymers was studied using a modified-falling head permeability apparatus under an accelerated gravity environment. Both distilled water and synthetic leachate were utilized as permeant liquid to assess the role of biopolymer amendment on the permeation behavior of sand-bentonite mixtures. Experimental results indicate that addition of biopolymers causes aggregation of the clay platelets, which in turn enhances the permeation behavior of the biopolymer-modified sand-bentonite mixtures. These mixtures meet the regulatory requirement of the liner.     

Copper Ion Cementation in Presence of a Magnetic Field

The effect of an electromagnetic field (EMF) on the rate of copper(II) cementation from copper sulfate solutions on a rotating iron cylinder was investigated. The studied variables were cylinder rotation speed, magnetic field strength, and magnetic field direction. The application of EMF increased the rate of cementation in both parallel and perpendicular direction of the magnetic field where the latter proved to be more effective. The rate of mass transfer under an EMF was found to be more than doubled. The enhancement of copper recovery in presence of the EMF is due to the induced motion of Fe⁺ⁿ in the solution which is limited to a certain range of cylinder rotation speed. The power consumption for cementation of copper could be significantly reduced by utilizing EMF.     

Induction of adaptive response <i>in utero </i>by ionizing radiation: A radiation quality dependent phenomenon

Investigation on possible induction of adaptive response (AR) by high-liner energy transfer (LET) particle radiation for protection against low-LET photon radiation-induced detrimental effects has not yet been performed in utero. This study verified if an AR could be induced by high-LET particle radiation from accelerated heavy ions against low-LET X-ray radiation-induced detrimental effects on fetal mice. Total body irradiation of pregnant C57BL/6J mice were performed by delivering a priming dose ranging from 10 mGy to 320 mGy of particle radiation on gestation day 11 followed one day later by a challenge dose at 3500 mGy from X-ray radiation. The monoenergetic beams of carbon, silicon and iron with the LET values of about 15, 55, and 200 KeV/μm, respectively, were examined. Significant suppression by the priming radiation of the detrimental effects (fetal death, malformation, or low body weight) was used as the endpoints for judgment of a successful AR induction on gestation day 18. Existence of AR was not observed. On the other hand, the priming dose of high-LET particle radiation, in some cases, even increased the detrimental effects induced by the challenge dose from low-LET X-ray radiation. Although existence of AR induced by high-LET radiation in cultured mammalian cells in vitro and in certain tissues of laboratory mice in vivo was demonstrated, the present study did not suggest that low dose of high-LET particle radiation could induce an AR in fetal mice in utero under the setup of our experimental system.     

DR环形吹风冷却装置及智能控制系统设计研究

介绍了河北达瑞化纤机械有限公司开发的DR环形吹风冷却装置,该装置能实现自动、精准、快速更换整流筒,打破了原有环吹风装置整流筒从风室顶部安装这一传统模式,利用风室底部安装和风室密封结构改变,采用气缸动力下的自动调节技术,实现了快速更换整流筒。该装置在维修和更换整流筒组件时,无须搬动上压盖,无须拆装若干螺栓,能自动化操作,降低了操作工人劳动强度,缩短了操作时间。开发的DCS智能控制系统,实现了实时智能监测冷却吹风装置的运行状况。     

Experimental study on flame spread along fuel cylinders in high pressures

Flame spread over solid fuels in high‐pressure situations, such as nuclear containment shells during a pressurized period, has potential to result in catastrophic disaster, thus requiring further knowledge. This paper experimentally reveals the flame spread behaviors over fuel cylinders in high pressures. Polyethylene and polymethyl‐methacrylate cylinders with the diameter of 4.0 mm are used in this study. Ambient gas is air, and total pressures are varied from naturally normal pressure (100 kPa) to elevated pressure (500 kPa). Flame characteristics including flame appearance and flame size and burning rate and flame spread rate are investigated. Results show that in high pressure, the flame appearance is significantly affected. As the pressure increases, the blue flame disappeared, and the color of flame tip changes from luminous yellow to orange as well the orange part extends down towards the base of flame. The dimensionless flame height increases with pressure for pressure below 150 kPa and then decreases with pressure above that level. The burning rates show increasing trend with pressure and are proportional to P^0.6 and P^0.79 for polymethyl‐methacrylate and polyethylene, respectively. Besides, flame spread rates for polymethyl‐methacrylate and polyethylene both were found to be proportional to P^0.5.