基于过程能力指数的刀具寿命研究

利用Glejser检验方法拟舍出刀具磨损过程残差模型，在此基础上，计算换刀时刻的过程能力指数，并且根据企业所要求的最低过程能力指数，计算刀具的质量寿命，提出将刀具的切削寿命和质量寿命结合起来进行换刀决策的方法。     

Cr12型模具钢锻造内部裂纹产生的原因及预防

基于Cr12型钢种的特点，归纳了Cr12钢锻造时内部裂纹的类型，分析了内部裂纹产生的原因并提出了相应的预防措施。     

铝合金结构件液固复合挤压模具的设计

挤压铸造和固态挤压的有效结合，能够得到组织致密的结构件。通过增加补偿板和垫板，能够较方便的实现挤压铸造后的固态挤压工序。本文介绍了针对圆柱形制件的液固复合挤压模具的模具结构和工作过程，这种一模两工序的设计思想也可应用于其他结构件的成形。     

Morphological aspects of rubber fracture and wear

Morphology of carbon black (CB)‐filled rubber was studied with AFM and SEM and the classification of filler agglomerates, based on their internal structure and filler–matrix interactions, has been proposed. It varies according to the activity of CB and the kind of rubber. It has been shown that fracture of rubber starts either inside filler agglomerates (de‐cohesion) or in a filler–matrix interphase (de‐adhesion) initiating wear of the material. Microscopic observations correlate well with TGA and EPR data of wear debris collected during friction of rubber. The increase of thermal stability of CB and the appearance of additional spin signals, respectively, for elongated samples or debris, are proposed to be associated with de‐cohesion or de‐adhesion of the agglomerates. New approach to the fracture of rubber called “fatal agglomerate concept” is presented. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

油润滑下Al/MoSi2材料的摩擦学特性

运用M-200型磨损试验机测定了油润滑下Al/MoSi2材料的摩擦磨损性能，采用SEM和X射线观察与分析了摩擦副表面的形貌和相组成，探讨了磨损机制。结果表明：采用20#机油润滑可有效地提高Al/MoSi2材料的摩察磨损综合性能；与干摩擦状态相比，其摩擦系统和磨损率分别下降了40%和60%；油润滑时，Al/MoSi2材料的磨损机制主要表现为疲劳点蚀和磨粒磨损。     

压力铸造的现状与发展

概述了压力铸造技术的特点，总结了目前中国压铸与国外的差距，分析了我国压铸业面临的机遇和挑战，论述了压力铸造技术的新工艺，以及今后压力铸造的研发方向。     

Al2O3—TiB2陶瓷刀具材料的高温氧化及其对刀具耐磨性能的影响

研究了Ａｌ２Ｏ３－ＴｉＢ２陶瓷刀具材料在１０００℃下的氧化行为，用ＸＲＤ、ＳＥＭ分析了氧化后的相组成及显微结构。结果表明：Ａｌ２Ｏ３－ＴｉＢ２陶瓷材料在１０００℃空气中氧化增重符合抛物线规律；随ＴｉＢ２含量的增加，该材料的抗氧化能力下降。     

Sliding wear behavior of salt bath nitrocarburized medium carbon steel

Salt bath nitrocarburizing is a well-known thermochemical diffusion process for enhancing the tribological and corrosion properties of ferrous components. The current work describes the role of a compound layer developed during nitrocarburizing, both in the ferritic and austenitic regimes of Fe-N-C system, on the sliding wear behavior of a medium carbon steel. The wear behavior of the nitrocarburized steel discs was assessed by the pin-on-disc tests (ASTM G 99-99) under different normal loads running against a hardened SAE52100 pin. It was observed that the compound layer on the surface not only controlled the wear rate but also resisted the adhesive wear/transfer of material from pin to disc, aside from providing low-friction coefficients.     

氧化铝纤维增强铝基复合材料热磨损研究EI

采用挤压铸造法制备了Al_2O_3纤维和Al_2O_3·SiO_2纤维增强铝基复合材料,在室温及200～400℃下进行了磨损性能试验。结果表明,复合材料的热磨损性能受纤维取向、纤维成分、基体成分及对磨材料硬度所影响,纤维的加入明显提高了铝基合金的耐磨性。