CONSTITUTE AND PROPERTY OFα-Ti AFTER HYDRIDING TREATMENT

研究了氢化处理对退火α-Ti 板材的组织、结构及性能的影响。α-Ti 在室温出现两种结构的氢化物:有序的fctγ相(TiH)和fccδ相(TiH_2)。分析了用X 射线衍射只查觉到δ相的原因。氢化物的数量及形态影响除氢后基体的晶粒组织。控制氢含量可以改善拉伸性能及疲劳性能。     

四川优质苧麻的结构和性能研究

本文采用扫描电镜、Ｘ射线衍射仪以及常规仪器分析的方法测试了四川优质麻－达县红皮小麻和大竹青白麻的形态结构，超分子结构和力学性能，并与棉纤维进行了对比．实验表明，精干麻表面光洁．有裂纹裂缝等结构不匀点，取向度高，结晶度高，断裂强度高，刚性和断裂比功大，而延伸小；纤维粗．在主要指标上，红皮小麻优于青白麻。     

Effect of the Liquid-Phase Characteristic on the Microstructures and Dielectric Properties of Donor- (Niobium) and Acceptor- (Magnesium) Doped Barium Titanate

Changes in the microstructure and dielectric properties with the variation of the donor/acceptor ratio in BaTiO₃ ceramics were investigated. In donor-rich specimens, a liquid that appeared during sintering did not penetrate into grain boundaries. However, in the acceptor-rich specimens, the grains were separated by a liquid film during sintering. The much higher mobility of the liquid film than that of the grain boundaries was suggested to cause extensive grain growth in acceptor-rich BaTiO₃. The macroscopic homogenization of dopants because of grain growth in acceptor-rich specimens resulted in changes in the dielectric properties.     

让住户满意的物业管理职能研究

从使住户满意的角度研究了物业管理中的计划、组织、领导、控制和创新五项职能,以指导物业管理企业提高管理水平和服务质量.     

Effects of Working Fluid,Tubeside Enhancement and Bundle Depth on the Optimized Fin Geometry of a Horizontal Condenser Tube

A theoretical study has been made to optimize the fin geometry of a horizontal finned tube which is to be usedfor condensers that handle the vapor load of a liquid phase change cooling module.Systematic numerical calcu-lations of the vapor to coolant heat transfer have been performed for parametric values of fin height,fin spacing,vertical bundle depth and tubeside heat transfer coefficient.Three dielectric fluids (R-113,FC-72,and FC-87)at atmospheric pressure were selected as the working fluids.For a single tube with optimized fin geometry,theaverage heat flux increased in the order of FC-87,R-113 and FC-72.Both the optimum fin height and optimumfin spacing increased with increasing vertical bundle depth.     

广西某矿区托帕石的宝石学特征

广西某矿区的脉石矿物——黄玉分三个世代,其中第三世代的黄玉晶体无色透明,重量大于0.9克拉,瑕疵不明显,密度(3.50)、硬度(7.8430)和折射率(1.6330)等特征均达宝石级,经系统研究测试,可以命名为托帕石(Topaz)。     

低k氟化非晶碳层间介质对芯片性能的影响

讨论了通过合理设计的工艺流程将低k氟化非晶碳材料应用到制造工艺中作为互连介质对集成电路性能的影响。基于一个互连结构简化模型计算出采用低k氟化非晶碳材料作为互连介质后RC延迟、功率耗散和线间串扰的变化情况。采用低k氟化非晶碳介质后,RC延迟和功率耗散随着互连长度的增大而减小,线间串扰也得到显著抑制。     

后热处理对新型马氏体耐热钢焊缝性能的影响

针对电力施工过程中对具有冷裂倾向的马氏体型耐热钢焊后后热处理时机选择与标准存在差异，即是否必要在冷却至100-120℃恒温一段时间后再进行后热处理的问题，安排了一系列的试验对后热处理的最佳时机予以讨论，对热处理后的焊缝组织进行力学性能试验和金相分析，对冲击后的试样进行了断口分析。试验证明，后热处理时机的不同对马氏体耐热钢焊缝冲击韧度有比较大的影响，马氏体耐热钢的后热处理应在马氏体转变完全后开始较为合适。     

黄原胶接枝共聚物降滤失剂应用性能评价

黄原胶（XG）具有优良的耐盐性和增稠降滤失性能，但耐温性较差。对XG分子结构的分析认为，可利用XG链上的活泼基团接枝丙烯酰胺等乙烯基单体，增强其耐温性能，用作耐温抗盐钻井液处理剂。对比了合成的黄原胶丙烯酰胺等接枝共聚物（XGG）降滤失剂与XG在淡水、4％盐水和饱和盐水钻井液中的增粘降滤失性能和抗温性能，并通过岩心膨胀试验对比了XGG、XG和KCl对页岩的抑制性能。试验结果表明，在淡水钻井液中XGG具有极强的增粘效果和降滤失能力，远远超过XG1随着钻井液矿化度的提高，XGG的性能有一定下降，但XGG在各种钻井液中均具有比XG更好的高温增稠和控制失水的能力；XG已具有优良的抑制性，XGG的抑制性得到进一步提高。     

Visualization and quantification of the mechanical deformation induced by an electrical field in poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) films

An optical nondestructive strain measurement technique was performed to analyze the mechanical deformation induced by an electrical field within the insulating materials. Poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) films were then subjected to constant electrical fields right up to their electrical breakdown. The experimental technique made it possible to follow the various stages of the mechanical behavior of PEN in real time. The final breakdown occurred in the observation zone and the related mechanical deformation was captured. A “margarita” structure was observed with a hole at the center. The experimental results indicated that the level of the induced‐mechanical deformations depended on the local environment. We defined two different zones representing the inside and the outside of the damaged area. The induced‐deformations were larger in the damaged zone. It was also observed that deformations increased when the sample had a lower degree of crystallinity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008