广东省灵芝、铁皮石斛、西洋参三种食药物质重金属暴露风险评估

目的 分析广东省3种食药物质灵芝、铁皮石斛和西洋参中重金属污染状况及其健康暴露风险。方法 在广东省10个地市采集灵芝及其相关产品（137份）、铁皮石斛及其相关产品（96份）、西洋参及其相关产品（70份）共303份,包括3种物质的鲜品、干制品原料和食品产品,其中广州采集33份、其余9个地市各采集30份。采用电感耦合等离子法进行铅、镉、总汞、总砷的含量测定和分析;根据点评估模型,计算鲜品（按折干率折算）和干制品原料中重金属的平均含量,按照药用和膳食食用两种暴露方式,分别估计3种食药物质的重金属暴露风险。结果 作为药膳食用,暴露量高于药用暴露量,其中灵芝、铁皮石斛、西洋参的镉暴露量占每月可耐受摄入量（PTMI）的8.51%、8.72%和8.56%;总汞的暴露量占PTWI的3.51%、0.91%和1.08%。铅暴露的暴露限值（MOE）分别为11.56、7.14和20.94,总砷暴露的MOE值分别为68.34、102.39和152.28。在考虑膳食暴露途径后,通过3种食药物质引起的重金属暴露风险仍在可接受范围内。结论 广东省居民通过灵芝、铁皮石斛、西洋参的膳食暴露途径引起的铅、镉、总汞、总砷4种重金属的暴露风险较低。     

铜冶炼渣的资源化利用

介绍了铜冶炼渣的资源现状,分析了其化学组成和矿物学性质,从化学利用和物理利用两方面阐述了铜冶炼渣的资源化利用方法和途径,根据当前铜冶炼渣的资源化现状,对其利用前景和利用中存在的问题进行了分析。     

金属拱型屋面板的开发与应用

简要介绍了武钢Ｗ６６６金属拱型层面板的开发、设计、试验研究及应用情况,探讨了理论分析的方法和应用前景。     

Effects of Technical Conditions on Structure, Morphology and Crystalline Size of Nanocrystalline Nd-Doped Ceria Powders

Nanocrystalline solid solution CeO2-Nd2O3 powders were prepared by low temperature combustion process.Special attention was paid to the influence of the glycine/metal ratio and calcination temperature on the powders phase structure, morphology and particle size.TG-DSC curves and XRD peaks of different glycine/metal ratio show that smaller particle size can be obtained with a slightly fuel-deficient ratio.XRD results indicate that the as-prepared powders are crystallized in a single fluorite structure.The crystalline size ranges from 9 to 24 nm, which increases with the increase of calcination temperature.The lower SEM images were characterized by the spongy and form-like microstructure of the powders.Organic agent may be gradually eliminated by high temperature calcination process.     

Identification of heavy metal-contaminated Tegillarca granosa using laser-induced breakdown spectroscopy and linear regression for classification

Tegillarca granosa (T. granosa) is susceptible to heavy metals, which may pose a threat to consumer health. Thus, healthy and polluted T. granosa should be distinguished quickly. This study aimed to rapidly identify heavy metal pollution by using laser-induced breakdown spectroscopy (LIBS) coupled with linear regression classification (LRC). Five types of T. granosa were studied, namely, Cd-, Zn-, Pb-contaminated, mixed contaminated, and control samples. Threshold method was applied to extract the significant variables from LIBS spectra. Then, LRC was used to classify the different types of T. granosa. Other classification models and feature selection methods were used for comparison. LRC was the best model, achieving an accuracy of 90.67%. Results indicated that LIBS combined with LRC is effective and feasible for T. granosa heavy metal detection.     

Experimental study on mercury content in flue gas of coal-fired units based on laser-induced breakdown spectroscopy

Accurate measurement of trace heavy metal mercury(Hg) in flue gas of coal-fired units is great significance for ecological and environmental protection.Mixed gas was used to simulate the actual flue gas of a power plant in this study.A laser-induced breakdown spectroscopy(LIBS)system for Hg measurement in mixed gas was built to study the effect of mixed gas pressure,Hg concentration in mixed gas and delay time on Hg measurement.The experimental results show that the appropriate low mixed gas pressure can obtain high Hg signal intensity and signal to noise ratio.The Hg signal intensity and signal to noise ratio increased with the increase of Hg concentration in mixed gas.The Hg signal intensity and signal to noise ratio decreased with the increase in delay time.According to the above results,the optimized measurement conditions can be determined.Different Hg concentrations in mixed gas were quantitatively analyzed by the internal standard method and traditional calibration method respectively.The relative error of prediction of the test sample obtained by the internal standard method was within 11.11%.The relative error of prediction of the traditional calibration method was less than 14.54%.This proved that the internal standard method can improve the accuracy of quantitative analysis of Hg concentration in flue gas using LIBS.     

Metal‐containing Polymers via Electropolymerization

Electropolymerization represents a suitable and well‐established approach for the assembly of polymer structures, in particular with regard to the formation of thin, insoluble films. Utilization of monomers that are functionalized with metal complex units allows the combination of structural and functional benefits of polymers and metal moieties. Since a broad range of both electropolymerizable monomers and metal complexes are available, various structures and, thus, applications are possible. Recent developments in the field of synthesis and potential applications of metal‐functionalized polymers obtained via electropolymerization are presented, highlighting the significant advances in this field of research.     

Lithium Intercalation Compound Dramatically Influences the Electrochemical Properties of Exfoliated MoS2

MoS₂ and other transition metal dichalcogenides (TMDs) have recently gained a renewed interest due to the interesting electronic, catalytic, and mechanical properties which they possess when down‐sized to single or few layer sheets. Exfoliation of the bulk multilayer structure can be achieved by a preliminary chemical Li intercalation followed by the exfoliation due to the reaction of Li with water. Organolithium compounds are generally adopted for the Li intercalation with n‐butyllithium (n‐Bu‐Li) being the most common. Here, the use of three different organolithium compounds are investigated and compared, i.e., methyllithium (Me‐Li), n‐butyllithium (n‐Bu‐Li) and tert‐butyllithium (t‐Bu‐Li), used for the exfoliation of bulk MoS₂. Scanning transmission electron microscopy (STEM), Raman spectroscopy, X‐ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV) are adopted for a comprehensive characterization of all materials under investigation. In addition, catalytic properties towards the hydrogen evolution reaction (HER) and capacitive properties are also tested. Different organolithium compounds exhibit different extent of Li intercalation resulting in different degrees of exfoliation. The inherent electrochemical behavior of MoS₂ consisting of significant anodic and cathodic peaks as well as its capacitive behavior and catalytic properties towards hydrogen evolution reaction are strongly connected to the exfoliation compound used. This research significantly contributes to the development of large‐scale synthesis of electrocatalytic MoS₂‐based materials.     

Increasing Heavy Metal Tolerance by the Exogenous Application of Organic Acids

Several metals belong to a group of non-biodegradable inorganic constituents that, at low concentrations, play fundamental roles as essential micronutrients for the growth and development of plants. However, in high concentrations they can have toxic and/or mutagenic effects, which can be counteracted by natural chemical compounds called chelators. Chelators have a diversity of chemical structures; many are organic acids, including carboxylic acids and cyclic phenolic acids. The exogenous application of such compounds is a non-genetic approach, which is proving to be a successful strategy to reduce damage caused by heavy metal toxicity. In this review, we will present the latest literature on the exogenous addition of both carboxylic acids, including the Kreb’s Cycle intermediates citric and malic acid, as well as oxalic acid, lipoic acid, and phenolic acids (gallic and caffeic acid). The use of two non-traditional organic acids, the phytohormones jasmonic and salicylic acids, is also discussed. We place particular emphasis on physiological and molecular responses, and their impact in increasing heavy metal tolerance, especially in crop species.