Weight function,stress intensity factor and crack opening displacement solutions to periodic collinear edge hole cracks

Periodic collinear edge hole cracks and arbitrary small cracks emanating from collinear holes, which are two typical multiple site damages occurred in the aircraft structures, are studied by using the weigh function method. An explicit closed form weight function for periodic edge hole cracks in an infinite sheet is obtained and further used to calculate the stress intensity factor and crack opening displacement for various loading cases. Compared to finite element method, the present weight function is accurate and highly efficient. The interactions of the holes and cracks on the stress intensity factor and crack opening displacement are quantitatively determined by using the present weight function. An approximate weight function method is also proposed for arbitrary small cracks emanating from multiple collinear holes. This method is very useful for calculating the stress intensity factor for arbitrary small cracks.     

Numerical simulation of prestrain history effect on ductile crack growth in mismatched welded joints

Pipe reeling may lead to plastic pre‐deformation (prestrain) around existing cracks in components; therefore, investigating whether this process accelerates or counteracts ductile crack growth, especially for strength mismatched welded joints, is warranted. This study focused on the effect of prestrain history on ductile crack growth in mismatched welded joints. A single‐edge‐notched tension specimen was selected for numerical study, and the crack was assumed to have existed before a prestrain history was applied. Crack growth resistance curves for plane strain and mode I crack growth under large‐scale yielding conditions have been computed using the complete Gurson model. Meanwhile, symmetrical and non‐symmetrical prestrain cycle modes with different loading levels were applied to the overmatched specimens. The outcome demonstrated that the mismatch ratio (the ratio between the yield stress of the weld metal and base metal) showed a significant effect on fracture resistance regardless of the stage at which the prestrain cycle loading was located. By contrast, the processing of the crack growth was weakened by the increase of prestrain values, and the symmetrical prestrain cycle resulted in greater plastic damage than the non‐symmetrical prestrain cycle did. However, the initial crack length had a non‐significant effect on the ductile fracture considering the prestrain and mismatch effects.     

Non-local line method for notched elements with use of effective length calculated in an elasto-plastic condition

The paper presents a non-local line method used to the fatigue life calculation of notched elements. The presented method is based on the concept of an effective length which determines the size of the equivalent fatigue zone. Effective values of normal stress calculated in the critical plane with a weight function were applied when determining the equivalent fatigue zone. Simulation studies were performed for two types of steel and two types of loading. Five different series of tests and simulations were used. Experimental studies were carried out for 40 HM-T and EA4T steels. These materials are used in railway industry, including the manufacturing of coupling bars. The notched test specimens contained notches with a tip radius of 0.2, 0.5, 0.8 and 1 mm. Stress calculations were performed using the finite element method by adopting cyclic material properties described by the model of a multi-linear hardening. Non-local calculations were performed in a defined critical plane for normal stress distribution and a weight function. As a result, the function of variation of the effective length depending on the loading level and geometry of the notch has been determined.     

Fatigue behaviour and modelling of talc‐filled and short glass fibre reinforced thermoplastics,including temperature and mean stress effects

Effects of temperature and mean stress on fatigue behaviour of talc‐filled polypropylene (PP‐T) and short glass fibre reinforced polypropylene (PP‐G), polyamide‐66 (PA66), and a blend of polyphenylene ether and polystyrene (PPE/PS) were investigated. Load‐controlled fatigue tests were conducted under positive stress ratios (R = 0.1 and 0.3) and at several temperatures (T = 23, 85 and 120 °C). Larson–Miller parameter was used and a shift factor of Arrhenius type was developed to correlate fatigue data at various temperatures. Effect of mean stress on fatigue life was significant for some of the studied materials; however, for the PPE/PS blend no effect of mean stress was observed. Modified Goodman and Walker mean stress equations were evaluated for their ability to correlate mean stress data. A general fatigue life prediction model was also used to account for the effects of mean stress, temperature, anisotropy and frequency.     

An investigation of T‐stresses in a plate with an inclined crack under biaxial loadings

For plates with an inclined crack of wide‐range aspect ratios under biaxial loadings, T‐stress values are calculated with three‐dimensional finite element method. The results show that the normalized T‐stress is crack length and orientation dependent. A linear equation for the relationship between normalized T‐stresses and biaxility factors is proposed to describe the normalized T‐stresses for different crack lengths and crack angles under different biaxial loadings, which is more convenient and involves wider biaxility ratios compared with the existing solutions. The plate thickness effect and the trend of normalized T‐stresses along the crack front thickness are also studied for mode I and I–II mixed‐mode cracks. Based on the analyses and comparisons, it is necessary to take the thickness effect into consideration when the crack length is long enough (a/W = 7/10). When the component of mode II is significant (β > 45°), and the biaxility ratios are negative, T‐stresses near the free surface are lower than those at other positions, which are the opposite of mode I crack and most of I–II mixed‐mode crack.     

Joint pricing and advertising strategy with reference price effect

Consumers are susceptible to reference price effects when they make purchase decisions for a certain product. Meanwhile, the sales price and advertisement are the determinable factors that have impact on consumers’ reference price which are also fundamental marketing strategies. Therefore, how to determine an appropriate sales price and advertising effort level to maximise firms’ profits is an essential task. A joint pricing and advertising problem for a monopolistic firm with consideration of reference price effect is investigated, where consumer demand rate is price-sensitivity and depends on the gap between the sales price and the reference price in consumers’ mind. An optimisation model is established to maximise the firm’s total profit by making a joint pricing and advertising strategy. The static and dynamic joint strategies are obtained by applying Pontryagin’s maximum principle. Results show that the dynamic strategies dominate the static ones. Furthermore, the dynamic pricing and dynamic advertising strategies are strategic complements. Additionally, the length of the sales period plays a key role in determining the superiority of the two dynamic strategies. Specifically, a relatively short sales period highlights the value of the dynamic advertising while a long sales period strengthens the function of the dynamic pricing.     

3D printing system: an innovation for small-scale manufacturing in home settings? – early adopters of 3D printing systems in China

This study investigates Chinese consumers’ adoption of the innovative 3D printing systems for small-scale manufacturing in home settings. Empirical studies were conducted in a survey with 256 participants. The number of significant determinants that affect an individual’s decision to adopt 3D printing systems has been identified by applying a model that integrates the Technology Acceptance Model and Innovation Diffusion Theory. A number of moderation effects of demographic variables (e.g. gender, design background) on the association between motivational variables and participants’ adoption have also been analysed with factor analysis, structural equation modelling and hierarchical regression. Our results shed some light on the characteristics of early adopters of home 3D printing systems in China. This study contributes to the early understanding of Chinese consumers’ adoption of innovative 3D printing systems.     

Bragg Edge Neutron Transmission Strain Tomography in Granular Systems

The advent of pixelated detectors for time‐of‐flight neutron transmission experiments has raised significant interest in terms of the potential for tomographic reconstructions of triaxial strain distributions. A recent publication by Lionheart and Withers [WRB Lionheart and PJ Withers, “Diffraction tomography of strain”, Inverse Problems, v31:045005, 2015] has demonstrated that reconstruction is not possible in the general sense; however, various special cases may exist. In this paper, we outline a process by which it is possible to tomographically reconstruct average triaxial elastic strains within individual particles in a granular assembly from a series of Bragg edge strain measurements. This algorithm is tested on simulated data in two and three dimensions and is shown to be capable of rejecting Gaussian measurement noise. Sources of systematic error that may present problems in an experimental implementation are briefly discussed.     

Achieving robust design through statistical effect screening

This work proposes a method for statistical effect screening to identify design parameters of a numerical simulation that are influential to performance while simultaneously being robust to epistemic uncertainty introduced by calibration variables. Design parameters are controlled by the analyst, but the optimal design is often uncertain, while calibration variables are introduced by modeling choices. We argue that uncertainty introduced by design parameters and calibration variables should be treated differently, despite potential interactions between the two sets. Herein, a robustness criterion is embedded in our effect screening to guarantee the influence of design parameters, irrespective of values used for calibration variables. The Morris screening method is utilized to explore the design space, while robustness to uncertainty is quantified in the context of info‐gap decision theory. The proposed method is applied to the National Aeronautics and Space Administration Multidisciplinary Uncertainty Quantification Challenge Problem, which is a black‐box code for aeronautic flight guidance that requires 35 input parameters. The application demonstrates that a large number of variables can be handled without formulating simplifying assumptions about the potential coupling between calibration variables and design parameters. Because of the computational efficiency of the Morris screening method, we conclude that the analysis can be applied to even larger‐dimensional problems. (Approved for unlimited, public release on October 9, 2013, LA‐UR‐13‐27839, Unclassified.) Copyright © 2015 John Wiley & Sons, Ltd.     

Theoretical analysis of shunting effect in resistance spot welding (RSW) of AA2219

Shunting effect is the loss of electrical current via the secondary circuit provided due to existence of previous nugget in a series of welding spots. This phenomenon is important for products containing intermittent spots. In this study, a theoretical model is developed for shunting effect in resistance spot welding for aluminum alloy 2219. Welding distance together with welding current and time is included in the model to analyze the shunting effect on final nugget quality. Thermal and electrical interactions are considered in the model as well as geometrical aspects of the process. Temperature dependence of material properties, integration through the whole volume of the nugget and heat-affected zone, and assuming a simple cooling mechanism are the most important modifications designated in the proposed theoretical model. Predicted results of nugget diameter are compatible with experimental and finite element analysis results.