腐蚀引起钻柱刺漏的机理分析及预防措施

详细分析了腐蚀引起钻柱刺漏的机理，得知：造成钻柱刺漏的主要原因是空气中的O2、地层中的硫化氢和二氧化碳、钻井液残液、钻井液中的盐类对钻柱的腐蚀和钻井液对钻柱的冲蚀。针对引起钻柱刺漏的原因，制定了去除钻井液中的O2、监测钻井液腐蚀性并加入相应的添加剂去除CO2和H2S、定期对钻杆进行检测、对存放的钻杆进行防腐处理、使用厚过渡区改进型钻杆等措施。在苏丹某区块现场实践证明，采取这些措施，由腐蚀引起的钻柱刺漏事故大大减少，在该区块的T-1井和D-1井钻进的3个月中，仅发生一次钻柱刺漏事故。     

印制电路板翘曲弓形的模具整平法

当PCB板发生翘曲,用常规方法整平仍达不到出货要求时,推荐采用弓形模具进行整平。     

On the linear correlation between microhardness and mechanical properties in polar polymers and blends

The tensile elastic modulus (E), yield stress (σ_Y) and microhardness (MH) of neat and binary and ternary blends of glassy semicrystalline ethylene–vinyl alcohol copolymer (EVOH), a glassy amorphous polyamide and a semicrystalline nylon‐containing ionomer covering a broad range of properties were examined. The tests were carried out on dry and water‐equilibrated samples to produce stiffer and softer materials, respectively. From the results, more accurate linear correlations were found to describe adequately the microhardness, modulus and yield stress of these strongly self‐associated polymers through hydrogen bonding. Copyright © 2003 Society of Chemical Industry     

三重介质油藏干扰试井压力动态特征

在建立三重介质油藏试井解释模型的基础上，对该类油藏的干扰试井压力动态变化进行了研究；分析了井筒储存、表皮系数、窜流系数以及弹性储容比对观测井井底压力的影响。结果表明，表皮系数对观测井的井底压力没有影响，而井筒储存是否会对观测井井底压力造成影响取决于井筒储存系数的大小以及激动井和观测井之间的距离，窜流系数和弹性储容比对观测井井底压力的影响与单井试井的结果相类似。     

液压多功能小件落物打捞器的研制与应用

由于侧钻井、水平井特殊井身结构限制，常规的小件落物打捞器打捞成功率低。为此经过认真分析和现场实践，将常规机械操作的一把抓改成液压操作，常规强磁打捞器的圆柱形平面磁铁改成具有伸缩性的磁针，同时结合套铣筒，研制出一种液压多功能小件落物打捞器，克服了侧钻井、水平井井身结构的限制，大大提高了一次打捞成功率，现场应用效果明显。     

浅析城2井推覆体钻具失效

城2井推覆体构造带主要岩性为海西期花岗岩，岩石硬度高，钻井施工难度相当大，易发生断钻具等复杂情况。就城2井推覆体构造特点，和钻井施工中钻具失效原因分析、发生钻具失效时的井下情况判断、推覆体大井眼打捞落鱼方法、推覆体钻进预防钻具失效的措施等方面予以介绍，对今后在山前推覆体构造带施工有一定的借鉴和指导作用。     

Damage Development in Gray Cast Iron under Static Deformation

The authors discuss the results of experimental investigation of structural degradation of gray cast iron at various stages of static tensile deformation. Analysis of the deformation process has revealed that damageability of a material under loading can be assessed by both a special strain parameter and scatter of hardness characteristics or a ratio of the modulus deviation to the current value of the elastic modulus. A correlation between these parameters has been established.     

Overlapping Schwarz and Spectral Element Methods for Linear Elasticity and Elastic Waves

The classical overlapping Schwarz algorithm is here extended to the spectral element discretization of linear elastic problems, for both homogeneous and heterogeneous compressible materials. The algorithm solves iteratively the resulting preconditioned system of linear equations by the conjugate gradient or GMRES methods. The overlapping Schwarz preconditioned technique is then applied to the numerical approximation of elastic waves with spectral elements methods in space and implicit Newmark time advancing schemes. The results of several numerical experiments, for both elastostatic and elastodynamic problems, show that the convergence rate of the proposed preconditioning algorithm is independent of the number of spectral elements (scalability), is independent of the spectral degree in case of generous overlap, otherwise it depends inversely on the overlap size. Some results on the convergence properties of the spectral element approximation combined with Newmark schemes for elastic waves are also presented.     

水力脉动冲击钻井工具初步研究与试验

掘力脉动冲击钻井是将水力脉冲、机械冲击振动结合为一体提高钻井速度的一种方法，介绍了辽河油田研制的脉动冲击钻井工具的结构、工作原理及现场试验情况。在潜山混合花岗岩、砂岩，硬脆性泥岩等不同地层的现场试验表明：水力脉动工具工作平稳，未出现蹩跳钻现象，也没有出现脱、落、断、掉等问题，主体安全性、可靠性较好；在潜山混舍花岗岩、砂岩、硬脆性泥岩地层机械钻速提高幅度较大，但在部分泥岩地层效果不佳。试验中发现密封圈耐温性差、脉冲腔易磨损等问题，并据此提出了水力脉动冲击工具的下一步研究方向。     

微桥法镍膜的弹性模量和残余应力测量

利用MEMS技术制作了不同尺寸的镍(Ni)膜微桥结构样品。采用纳米压痕仪XP系统测量了微桥载荷与位移的关系,并结合微桥力学理论模型得到了两种不同尺寸的Ni膜的弹性模量和残余应力。结果表明,两种不同尺寸的Ni膜的弹性模量结果一致,为190 GPa左右,但是残余应力变化较大。与采用纳米压痕仪直接测得的带有硅(Si)基底的Ni膜弹性模量186.8 7.5 GPa相比较,两者符合较好。