Recovery retardation in equal channel angular pressed Al–Zr alloy during friction stir welding

The effect of Zr on reduction of hardness and microstructure in an FS weld of equal channel angular-pressed Al alloy was investigated. Zr addition to Al suppressed dynamic recovery in the thermomechanically affected zone and enabled retention of the high hardness of the ECA-pressed material throughout the weld.     

Metallurgical failure analysis of cold cracking in a structural steel weldment: Revisiting a classic failure mechanism

Cold cracking of structural steel weldments is a well-characterized, well-documented, and well-understood failure mechanism. Extensive effort has been put forth to recognize the welding and materials selection parameters that are conducive to cold cracking; however, these engineering efforts have not fully eliminated the occurrence of such failures. This article describes cold cracking failure specifically related to the construction industry. This particular failure was successfully identified prior to final erection of the structural member, and the weld was successfully reworked. These actions potentially prevented a serious catastrophic event that could have occurred have occurred either later in the construction process or possibly during the use of the building. Individual welding parameters, such as electrode/wire selection, joint design, and pre/postheating, played a role in the failure, and a number of human factors relating to the actual fabrication practices also contributed to the failure process.     

钢骨架塑料(PE)复合管的安装技术

钢骨架塑料复合管既有钢管的耐压又有塑料管的耐腐蚀性，且易于敷设，使用寿命长，本文结合实际施工中的应用。介绍其要点。     

WC对铜基和镍基喷焊覆层材料耐气蚀性能的影响

在CuNiSiB,NiCrSiB自熔合金粉末中添加WC陶瓷颗粒，利用氧乙炔焰粉末喷焊工艺制备覆层材料，用超声波振动气蚀仪对覆层材料进行耐气蚀性能研究，用扫描电子显微镜对覆层材料表面气蚀破坏形貌进行观察，结果表明：复合覆层材料的耐气蚀能力比基体强；提高CuNiSiB覆层材料耐气蚀能力的途径是强化晶界，还探讨了覆层材料的气蚀破坏机理。     

HSLA-80/100钢的焊接

对ＨＳＬＡ－８０／１００钢的焊接性、焊接材料及焊接工艺进行了综述，并指出了现存在的主要问题。     

Planning the GMAW process by constraint propagation

Although the gas metal arc welding (GMAW) process is widely used for joining metals, its planning is still a cumbersome task. The planning procedure involves many complex interrelationships among the process variables and depends heavily on empirical knowledge. Therefore, a solution method that allows a convenient way to represent the domain knowledge and evaluate the process variable relationships is needed. Further, the lack of a strong domain theory to quantify these interrelationships is a deficiency in the planning of the GMAW process. This paper presents a solution method that overcomes this deficiency and introduces a convenient knowledge representation scheme. The solution method considers the planning procedure to be a constraint satisfaction problem (CSP). The AC-4 algorithm is used to obtain arc consistency among nodes in the constraint network and the PC-4 algorithm is applied to obtain path consistency in the network. A modified version of the AC-4 algorithm is developed to reduce the search space and correspondingly reduce the computation time. An example is presented to demonstrate the capability of the method and its potential to reduce lead time.     

不同品位高钛渣对沸腾氯化工艺的影响

分别以94％品位高钛渣和90％品位高钛渣为原料，采用沸腾氯化工艺制备粗TiCl4，分析了两种品位高钛渣对沸腾氯化工艺的影响。结果表明：94％品位高钛渣由于其活性低而对沸腾氯化工艺的影响较大。     

Ti-23Al-14Nb-3V合金氩弧焊接头的显微组织及其力学性能

研究了预热对Ｔｉ－２３Ａｌ－１４Ｎｂ－３Ｖ合金焊接性，特别是对消除氩弧焊冷裂纹的作用以及对接头显微组织和力学性能的影响。结果表明，焊前预热可有效降低该合金的冷裂倾向。经预热处理后，焊缝区的结晶层状线消失，热影响区的硬度峰得到缓和，整个焊缝的显微硬度分布趋于均匀，但焊缝区的枝晶发生粗化，热影响区有所扩大。焊件接头的拉伸试验表明，预热可使焊缝区的接头强度系数增加，但无论预热与否，接头强度均低于母材强度，且不显示宏观塑性。     

液态中锰渣摇包生产高硅锰硅合金的探讨

论述了利用液态中锰渣摇包生产高硅锰硅的原理、工艺过程热平衡,并介绍了其操作过程、主要影响因素及所取得的经济、社会效益.     

碎丝埋弧焊在大型立式储罐中的应用

大型储罐底板焊接及变形控制是保证储罐整体施工质量的关键环节,采用碎丝填充的焊接方法可以防止变形,同时可以有效地避免应力集中,提高施工质量。文章介绍了碎丝埋弧焊的原理、工艺参数和焊接方法。实践证明,填充碎丝不仅是一种减小底板焊接变形的手段,同时可以充分利用焊接热能,节约焊接时间和焊剂用量,经济效益好,是一种值得推广的技术。