熔渣法碳化铬涂层的抗氧化性能研究

对熔渣法碳化铬涂层在各种温度下经20h和200h的氧化性能进行了研究，与常用的一些锅炉用钢进行了对比试验，结果表明碳化铬涂层抗氧化性能比15CrMo、102、T91钢好，可以与TP347钢相媲美。     

Microstructural evidence for short-circuit oxygen diffusion paths in the oxidation of a dilute Ni-Cr alloy

A comparative study of high-temperature oxidation of Ni containing 1 at.% Cr and pure Ni was carried out. Instead of the conventional kinetics study using thermogravimetry, a microlithographic marker experiment was designed. Observation of the markers using cross-sectional TEM and SEM has revealed striking differences in the scale morphology, microstructures, and oxidation mechanisms between pure Ni and the Cr-doped Ni substrates. In particular, the results suggest that a small addition of Cr promotes significant inward transport of oxygen. Marker experiments revealed that NiO grown on pure Ni is wholly attributable to outward-cation diffusion. In contrast, NiO grown on Ni–1 at.% Cr exhibited formation of a substantial inner layer having a submicron grain size, established by the markers to have formed from oxygen ingress. For pure Ni, voids were observed to be distributed only within oxide grains. In contrast, for Ni containing 1 at.% Cr, elongated pores formed extensively along oxide-grain boundaries. Formation of new fine-grain oxide in these pores was observed to have sometimes completely resealed the void. It is, therefore, proposed that the transport of oxygen in the case of oxide scale grown on Ni–1 at.% Cr occurs via voids (pores) formed by vacancy coalescence at the grain boundaries.     

Enhanced oxidation of the 9%Cr steel P91 in water vapour containing environments

The short term (∼100 h) oxidation behaviour of the 9%Cr steel P91 was studied at 650 °C in N₂-O₂-H₂O gas mixtures containing a relatively low oxygen level of 1%. The oxidation kinetics were measured thermogravimetrically and the oxide scale growth mechanisms were studied using H₂¹⁸O-tracer with subsequent analyses of oxide scale composition and tracer distribution by MCs⁺-SIMS depth profiling. The corrosion products were additionally characterised by light optical microscopy, SEM-EDX and XRD. It was found that the transition from protective, Cr-rich oxide formation into non-protective mixed oxide scales is governed by the ratio H₂O^(g)/O₂ ratio rather than the absolute level of H₂O^(g). The results of the tracer studies in combination with the data obtained from experiments involving in situ gas changes clearly illustrated that under the prevailing conditions the penetration of water vapour molecules triggers the enhanced oxidation and sustains the high growth rates of the poorly protective Fe-rich oxide scale formed in atmospheres with high H₂O^(g)/O₂ ratios. The experimental observations can be explained if one assumes the scale growth to be governed by a competitive adsorption of oxygen and water vapour molecules on external and internal surfaces of the oxide scales in combination with the formation of a volatile Fe-hydroxide during transient oxidation. The formation of the non-protective Fe-rich oxide scales is suppressed in atmospheres with low H₂O^(g)/O₂ -ratios, and the healing of any such scale is promoted.     

磨制铝粉工艺中物料的动态平衡研究

铝与其他非金属矿物不同，其粉碎工艺既具有球磨工艺的普遍性又具有特殊性。运用传统的球磨理论，对铝在球磨工艺中的物料平衡状态进行了解释。     

Oxidation Behavior of a Single-Crystal Ni-Base Superalloy in Air—II: At 1000, 1100, and 1150°C

The oxidation behavior of a single-crystal (SC) Ni-base superalloy was studied over the temperature range from 1000–1150°C and analysed by TGA, XRD, EDAX, and SEM. The results indicated that the SC Ni-base superalloy exhibited parabolic oxidation kinetics, which were controlled by the growth of the inner -Al₂O₃ layer. A mixed scale formed on the SC Ni-base superalloy after prolonged oxidation. The scale consisted of an outer layer of spinel, a sublayer of mainly -Al₂O₃ with small amount of spinel adjoined by a very thin and even discontinuous layer of CrTaO₄-rich oxide, and an inner -Al₂O₃ layer. The inner -Al₂O₃ layer provided good protection. No internal oxides or nitrides were observed below the inner -Al₂O₃ layer after 1000 hr at 1000°C, and after 200 hr at 1100 and 1150°C.     

HIGH TEMPERATURE OXIDATION AND STRUCTURE OF SCALE AND WHISKERS FOR Fe-Ni-Cr SEALING ALLOYS

The oxidation rate,the growth,morphology and structure of oxide scale and whiskers forFe-Ni-Cr sealing alloys in H_2-H_2O atmosphere at high temperatures have been studied.The growth rate of scale is controlled by diffusion.The scale is composed of Cr_2O_3 andspinel(Fe,Mn)O·Cr_2O_3 and the oxide whisker,are spinel(Fe,Mn)O·Cr_2O_3.     

Observations on the role of oxide scales in high-temperature erosion-corrosion of alloys

The results are presented of exposure to a controlled high-temperature erosive gas stream of a series of alloys, which were selected to represent the range of microstructures and mechanical properties available in commercial high-temperature alloys. Analysis of the kinetic and morphological data suggested that the high-temperature oxidation behavior of a given alloy plays a very important role in determining its erosion-corrosion behavior under the conditions studied. In terms of relative behavior, alloys which are weak but ductile at temperature, and which form tenacious oxide scales, exhibited the highest resistance to high-temperature erosion-corrosion. Simple models were developed to describe the expected interaction between high-temperature oxidation and erosion.     

The role of thermal shock in cyclic oxidation

The effect of thermal shock on the spalling of oxides from the surfaces of several commercial alloys was determined. The average cooling rate was varied from approximately 240°C/sec to less than 1.0°C/sec during cyclic oxidation tests in air. The tests consisted of 100 cycles of 1 hr at the maximimum temperature (1100 or 1200°C). The alloys were HOS-875, TD-Ni, TD-NiCrAl, In-601, In-702, and B-1900 plus Hf. All of these alloys exhibited partial spalling within the oxide rather than total oxide loss down to bare metal. Thermal shock resulted in deformation of the metal, which in turn resulted, in most cases, in change of the oxide failure mode from compressive to tensile. Tensile failures were characterized by cracking of the oxide and little loss, while compressive failures were characterized by explosive loss of platelets of oxide. This behavior was confirmed by examination of mechanically stressed oxide scales. The thermally shocked oxides spalled less than the slow-cooled samples with the exception of TD-NiCrAl. This material failed in a brittle manner rather than by plastic deformation. The HOS-875 and the TD-Ni did not spall during either type of cooling. Thus, the effect of thermal shock on spalling is determined, in large part, by the mechanical properties of the metal.     

弥散Gd_2O_3质点改性的新型复合铝化物涂层的氧化行为SCIEI

研究了Gd_2O_3质点及其添加量对涂层在空气中1100℃氧化行为的影响及作用机制。结果表明,NiAl涂层中加入Gd_2O_3质点后,极大地降低了涂层的氧化速率,显著提高了氧化膜的粘附性,比简单NiAl涂层具有更好的抗高温氧化性能。复合镀层经渗Al后,一部分Gd_2O_3质点仍弥散分布于涂层中,另一部分细小的亚微观质点在涂层/基体界面处富集,形成氧化物聚集带,聚集带具有扩散障作用。连续的聚集带更有效地抑制退化,提高涂层使用寿命。     

MoSi2—Mo5Si3复合材料的低温氧化行为

通过热重分析（TGA）、X射线衍射（XRD）和扫描电镜（SEM）研究了MoSi2-Mo5Si3复合材料的低温氧化行为,指出材料低温氧化时,随Mo5Si3量增多,材料氧化加剧,当Mo5Si3含量超过16％（质量分数）时发生“PEST”现象,所形成的SiO2由于MoS3晶须的大量存在,使其不能均匀连续地分布于材料表面,从而加剧了氧化。