流动条件下炔氧甲基季胺盐的缓蚀性能研究

利用交流阻抗(EIS)、线性极化、动电位极化和失重法，研究了炔氧甲基季胺盐对N80在常温CO2饱和的3％NaCl溶液中的电化学行为和缓蚀性能的影响．结果表明：空白溶液中N80的累计失重在4m／s以后急剧增大，即介质的临界流速为4～5m／s．动态下炔氧甲基季胺盐存在与静态下相同的浓度极值现象，流速低于5m／s时缓蚀剂的极值浓度与静态时相同，都为150mg／L，而流速高于5m／s后极值浓度有所增加．     

COLOURING OF PURE IRON AFTER Ti~＋-O~＋ DUAL ION IMPLANTATION

用电化学的方法对经Ｔｉ~＋－Ｏ~＋二重离子注入后的钝铁表面进行处理，可呈现出深蓝、海蓝、褐、紫、金黄、淡黄等颜色用Ｘ射线光电子能谱（ＸＰＳ）对着色表面进行分析，发现表层有ＴｉＯ＿２富集，证明存在钛的氧化物是着色的必要条件．同时着色后的表面存在Ｔｉ的浓化层，着色的深浅程度与钛的浓度有关     

高频窄脉冲电化学光整加工工艺特性研究

阐述了高频窄脉冲电化学光整加工原理;比较了其与脉冲电化学加工的区别与联系;通过实验,研究及分析了电流密度、加工间隙、工件材料、加工时间及脉冲参数等因素对加工后表面质量的影响.实验结果表明:在合适的工艺参数情况下,高频窄脉冲电化学光整工艺可大幅度提高加工效率,获得镜面级的表面质量,并能降低加工成本.     

Electrochemical properties of some cobalt antimonides as anode materi-als for lithium- ion batteries

Some cobalt antimonides have been prepared and studied as the candidate anode materials for lithium ion batter-ies. Reversible capacities of 424,423 and 546 mA·h·g-1 were measured at the first cycle for as-solidified CoSb2, CoSb3 and annealed CoSb3 respectively. A low lithium ions diffusion coefficient in the order of 10-16 m2·s-1 was estimated from the coulometric titration measurements in the annealed CoSb3 electrode. It was found that the electrochemical properties of fine powders are significantly better than coarse powders. However the SEM picture shows that the nano-sized CoSb3 powders gathered to larger granules, which worsens somewhat the capacity retention of the nano-sized materials, although the volume capacities of the annealed and ball milled CoSb3 remain near twice of that of graphite after 50 cycles.     

微液滴现象与大气腐蚀——Ⅱ.微液滴现象的电化学表征

用扫描Kelyin探头和电化学极化等手段,研究了微液滴现象与大气腐蚀的电化学过程之间的相关性.扫描Kelvin探头测定主液滴周围的电位分布显示,微液滴只在表面的正电性区域出现;当有微液滴形成时,火山形电位分布的峰高且宽、谷深且窄;同时,峰变宽的速率与微液滴的扩展速率近似相等.电化学极化结果显示,微液滴的成核速率随极化电流的增加而线性加速,促使大气腐蚀过程发生的电位差和相应的腐蚀电流是微液滴形成和发展的推动力.     

快速凝固MlNi4．0 Al 0．3 Si 0．1 Fe0．6无Co贮氢电极合金的微结构和电化学性能

研究了单辊快淬快速凝固处理对无Co贮氢电极合金MlNi4．0Al0．3Si0．1Fe0．6的微结构和电化学性能的影响。XRD分析表明，快凝合金仍为单相CaCu5型结构，但合金相的成分和结构均匀性得到明显改善。金相观察和能谱分析显示，铸态合金为比较粗大的树枝晶结构并存在明显的成分偏析，而快凝合金呈细小的胞状晶结构，合金中元素的分布趋于均匀化。电化学测试表明，快速凝固处理后合金的活化性能不变，循环稳定性得到显著改善，但其放电容量和高倍率放电性能有所降低。研究发现，快凝合金电极的交换电流密度Io以及氢在合金中的扩散系数D较铸态合金有所减小是导致其高倍率放电性能降低的主要原因。快速凝固处理导致无Co合金电化学性能的变化与合金的微结构的改变有关。     

Synthesis and characterization of multidoped lithium manganese oxide spinel LiCo0.02La0.01Mn1.97O3.98Cl0.02

1 Introduction The cathode material plays an important role in the performance of lithium ion batteries. Lithium transition metal compounds with layered and spinel structure are favourites among cathode materials for lithium rechargeable batteries. In thi…     

Ta与Ta-2.5W在硫酸溶液中的电化学性能比较

利用电化学测试仪Mode173A测试了Ta和Ta-2．5W在温度为60℃，浓度为30％，60％和80％的硫酸溶液中的Tafel曲线和动电位扫描阳极极化曲线。结果表明，在3种浓度的硫酸溶液中，Ta-2．5W的腐蚀倾向于Ta的腐蚀倾向，腐蚀电流密度比Ta的小，钝化性能比Ta的优越。     

Electrochemical behaviour of commercially pure titanium and Co—Cr alloy in Ringer‘s solution

The electrochemical behaviors of commercially pure titanium(CP Ti) and Co-Cr alloy in Ringer‘s solution have been investigated.The results indicate that the electric potential of passive region for CP Ti is up to 3000mV,and its passive current density is 3.078 μA/cm^2,The excellent corrosion resistance of CP Ti can be attributed to the formation of TiO2 oxide film.The passive region of Co-Cr alloy is 770mV,which is narrower than that of CP Ti.However,no hystersis loops are found in the reverse scanning curves of Cu-Cr alloy.A complex oxide film of Co3O4,Co2O3,and Cr2O3 formed on the surface provides Co-Cr alloy with a stable electrochemistry property.The corrosion rates of the crevice samples increase with the pH value of medium decreasing.The electron probe microanalyzer(EPMA) analysis indicates that Ti in CP Ti and Co,Cr in Co-Cr alloy dissolve in crevice area due to the Sealed-Cell effect.