Analysis of Intermetallic Phases Formed on Surface Vapor Oxidized H13 Hot Work Steels in Molten Aluminum

In this paper, the author dipped surface vapor oxidized H13 steel specimens into 700℃ molten aluminum liquid for a certain period of time. Analyze the intermetallic phases formed on the H13 samples surface with optical microscope and X-ray diffraction method. The observation of immersion test sample's cross-section shows that Fe3O4 film will protect die substrate from molten aluminum erosion. The identification of the intermetallic phases reveals that they consist of 2parts, which is named as the composite layer and the compact layer. Further investigations are made in order to know the phase constituents of the 2 layers, they are Al8Fe2Si (outer composite layer), (AlCuMg) and Al5Fe2 (compact layer),respectively. The experimental results show that on the same specimen, a convex surface with bigger radius of curvature is more likely to be molten and the melting loss speed is also faster than a flat and smooth surface. The thickness of compact layer on a smooth surface is much bigger than that of the convex surface. Therefore, the author supposes the compact layer is favorable in stabilizing the die surface material from further melting loss, as their formation on the die surface, the melting loss speed will decrease.     

氰化氢在终冷塔中气液两相之间转移的研究

分析了煤气中氰化氢的形成,论述了氰化氢在煤气和其冷凝液中的平衡机理,讨论了影响氰化氢相平衡的因素,研究了直接终冷、间接终冷时煤气中氰化氢的转移情况。     

GRAPHICAL PROCEDURE FOR REACTIVE DISTILLATION SYSTEMS

In this paper we analyze a ternary reactive distillation system, where an equilibrium chemical reaction occurs in the liquid phase. By using a set of transformed variables proposed by Barbosa el al. (1988b) and well known graphical procedures for non-reactive systems; the minimum reflux ratio, minimum number of equilibrium stages, mass and energy balances for a reactive column and flash can be easily obtained. The procedures developed in this paper are applied to ISOBUTYLENE-METHANOL-MTBE system.

The main objective in developing this model is to obtain, as much as possible, rigorous information for the analysis of one reactive distillation column in a Process Simulator with capability of handling this type of new operation.     

OPTIMIZATION OF PRESSURE SWING ADSORPTION EQUIPMENT PART II OPTIMIZATION OF TWO BED OXYGEN GENERATORS

Local equilibrium model described in Part I is used to stimulate both, the steady state operation conditions and transient regime after the start of PSA equipment. The effect of axial dispersion, adsorption isotherm nonlinearity and high pressure level is simulated. On the basis of numerical analysis, the operation of a classical two-bed oxygen generator is compared with two configurations having pressure equalizing step. The optimization strategy of the given PSA equipment has been proposed and the procedure is demonstrated on an example. The scaling-up condition for PSA equipments which can be described by local equilibrium model has been proposed on the basis of the theoretical analysis.     

碱土金属在萃取剂与树脂间反应平衡常数的测定

研究了碱土金属离子在Ｄ００１树脂与８－羟基喹啉三氯甲烷溶液间的平衡常数Ｏ－ｔＫ的测定。其值依Ｍｇ、Ｃａ、Ｓｒ、Ｂａ次序减小。并得出萃取剂浓度［ＨＡ］。与金属离子在两相分配的关系。     

高岭土在碳热还原氮化过程中的相变

系统研究了苏州高岭土碳热还原氮化合成SiAlON过程在不同温度下的相变。对试样的XRD、SEM以及EDXA分析结果表明 ,1 30 0℃之前 ,试样中没有氮化物生成 ,物相为莫来石、石英和方石英 ;1 30 0℃时 ,高岭土开始发生氮化反应 ,生成过渡型SiAlON和β SiAlON。此时 ,石英和方石英相基本消失 ;1 4 0 0℃时 ,过渡型SiAlON、β SiAlON和X SiAlON三相共存 ,β SiAlON有所增多并有少量刚玉相生成 ;从 1 4 50℃到 1 550℃ ,Z值为 3的β SiAlON成为惟一的氮化产物 ,与少量SiC和刚玉相并存。莫来石在 1 50 0℃时完全消失     

线性多智能体系统一致性问题的部分稳定性方法（英文）

A linear transformation is proposed to deal with the consensus problem of high-order linear multi-agent systems(LMASs).In virtue of the linear transformation, the consensus problem is equivalently translated into a partial stability problem. We discuss three issues of the LMASs under a generalized linear protocol: 1) to find criteria of consensus convergence; 2) to calculate consensus function; 3) to design gain matrices in the linear consensus protocol. Precisely, we provide a necessary and sufficient criterion of consensus convergence in terms of Hurwitz stability of a matrix and give an analytical expression of the consensus function. In addition, we set up a relation between the gain matrices in the protocol and the convergence time and consensus accuracy of the agents, and then design the gain matrices with respect to a pre-specified convergence time and a required consensus accuracy.     

Comments on “Exact and approximate feedback linearization without the linear controllability assumption [Automatica 48 (2012) 2221–2228]”

The conditions for state feedback linearization suggested in the aforementioned article are shown, by means of counterexamples, not to be sufficient. In view of this, modified results are proposed for ensuring the sufficiency.     

Catalytic properties of aluminated sepiolite in ethanol conversion

The aluminated sepiolite, obtained by alkaline treatment with KAlO₂, as well as the silver-exchanged aluminated sepiolite were tested in ethanol conversion. The reactions were performed at 280°C and with 50 Torr of ethanol in He. After the alumination through KA1O₂, ethanol dehydrogenation and ethanol dehydration resulted from the Lewis acidity. The dispersion of silver led to a bifunctional catalytic system and the overall catalytic activity and the selectivity towards the acetaldehyde production increased. As a result of the Prins reaction, a significant yield in butadiene was observed.     

结合误差变换的Bouc-Wen迟滞非线性系统反步控制器设计

针对智能材料执行器中非平滑、多映射的迟滞非线性,采用Bouc-Wen模型描述迟滞,并提出了一种基于误差变换的反步控制器设计方案.首先利用Bouc-Wen模型中的变量特性,通过预设性能函数,将误差约束在预设范围内.然后通过误差变换,将一个对输出误差存在约束的跟踪问题转化为一个无约束的镇定问题.最后利用反步控制法设计迟滞系统的控制器,该控制方法保证期望的跟踪精度,并能将误差限定在设定范围内且满足预设性能,提高了系统的暂态和稳态性能.仿真结果表明设计方法的有效性.