�Լӿ��Ĵ���Ȼ�����ܽ������ʶ

本文根据四川天然气产能建设多年的实践,分析了产能建设的特点和存在问题,着重强调了当前搞好产能建设应注意的几个问题,供决策和工作参考。     

�¸�������в������Ȼ�����꾮�ٶȵ�;��

本文针对天然气井提高钻井速度问题,总结分析了盆地中部井身结构,水力、机械参数,聚合物钻井液,正注反挤固井等工艺技术对该地区钻速的影响。指出提高天然气井钻井速度,必须搞好系统工程,形成配套技术。     

双相不锈钢焊接技术状况

双相不锈钢具有优异的综合性能，应用范围广，其焊接技术独具特点，受到特别关注。本文论述了双相不锈钢焊接的基本原则，焊丝、保护气体及焊接参数的选择等。     

储层识别模式的研究

用数学方法建立气测井油气储层识别模式,以解决录井中实时软件在判别依据少的条件下,及时识别油气显示假异常的难题。该判别式经实用,正到率达90％。     

黄土塬区天然气地震技术和综合解释

黄土塬区复杂的地表条件难以获得可供解释的物探资料,本文给出了勘探天然气的地震技术,在野外弯线地震数据采集中,冲沟区运用了弯线高分辨率技术;塬上区采用非纵测线和地震测深观测系统,大药量、深井和强化组合法的接收条件。初步解决了弯线地震资料处理中二维滤波、静校正、速度分析等技术难题。摸索出一套以地震为骨架,构造解释与岩性解释相结合,重力-电法-地震联合解释落实古生界天然气构造圈闭的综合物探解释技术,并以实例展示方法的有效性。     

Formation of uniform GaAs multi-atomic steps with 20–30 nm periodicity and related structures on vicinal (111)B planes by MBE

We studied morphology of GaAs surfaces and the transport properties of two-dimensional electron gas (2DEG) on vicinal (111)B planes. Multi-atomic steps (MASs) are found on the vicinal (111)B facet grown by molecular beam epitaxy, which will affect electron transport on the facet. We also studied how the morphology of GaAs epilayers on vicinal (111)B substrates depends on growth conditions, especially on the As₄ flux. The uniformity of MASs on the substrates have been improved and smooth surfaces were obtained when the GaAs was grown with high As₄ flux, providing step periodicity of 20 nm. The channel resistance of the 2DEG perpendicular to the MASs is reduced drastically with this smooth morphology. These findings are valuable not only for fabricating quantum devices on the (111)B facets but also those on the vicinal (111)B substrates.     

住宅厨房共用排烟系统性能比较

介绍了当地住宅厨房通风设计的发展简况，比较了两种房共用排烟系统的构造，尺寸，性能，造价及能耗，对厨房通风设计和施工提出了建议。     

凝析气井井筒动态预测方法

利用垂直管流公式,结合流体相平衡热力学闪蒸计算,运用状态方程模拟,给出凝析气井井筒动态预测新方法.根据该方法.结合油藏数值模拟计算的结果,可准确地预测不同生产时期凝析气井的井筒动态.     

荫罩黑化及DX气与煤气成分的探讨

本文介绍了彩色显像管荫罩黑化反应的机理,详细说明了DX气制气流程,以及DX气的成分对黑化膜品质的影响。计算分析了成分不同的煤气在制成DX气时的成分变化。同时还分析了黑化工艺和黑化设备对煤气成分波动的适应性,及在生产实践中改变DX气制气时的煤气空气对黑化膜质量的影响。     

Gas diffusion and dielectric studies of polystyrene‐fullerene compositions

Polystyrene‐fullerene compositions containing up to 0.45 mol % (3 wt %) fullerene C₆₀ were investigated. It was established that the addition of fullerene to polystyrene (PS) leads to an increase of molecular packing density and so influences the transport of small molecules through the polymer films. Gas diffusion through films of PS‐fullerene compositions is slower than through PS films, and gas separating properties of compositions are higher. Dielectric studies showed that the fullerene is distributed as clusters in the polymer matrix of solid composition prepared from a toluene solution of PS and fullerene. Heating without air to the temperature higher than PS glass transition leads to increasing relaxation time of α‐transition in PS of compositions containing >0.15 mol % (1 wt %) fullerene. This effect is caused by rather strong interaction of PS chains via fullerene molecules entered into the PS‐fullerene complex. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2946–2951, 2002