Determination of the solubility parameter of poly(ethylene oxide) at 25°C by gas-liquid chromatography

The solubility parameter of poly(ethylene oxide) at 25°C has been determined using the method developed by DiPaola-Baranyi and Guillet, by the extrapolation of the values of the interaction parameter χ, at high temperatures, ranging from 70°–90°, 90°–110° and 110°–130°C down to 25°C. The values of the solubility parameter obtained, depending on the temperature ranges employed, are 9.8, 9.9 and 10.1, respectively.     

Development of new device for measuring thermal stresses

In recent years, numerous analytical and experimental researches have been performed on the prediction of thermal stresses in mass concrete structures. However, due to the difficulty of the problem, limitations still exist for both analytical and experimental methods of measuring thermal stresses in mass concrete. In this research, a new experimental device measuring thermal stresses directly in a laboratory setting is developed. The equipment is located in a temperature chamber that follows the temperature history, which has been previously obtained from temperature distribution analyses. Thermal forces are measured continuously by two load cells in the device. The results show that the thermal stresses estimated by the newly developed device agree well with general stress variations in actual structures.     

复合材料夹层结构产品固化变形分析

本文讨论产生复合材料产品固化变形的主要原因是树脂收缩引起的各方向上不同的线膨胀系数具体分析了复合材料夹层结构的的固化变形，经技术上的改进解决了固化变形，以满足产品的设计要求。     

A new approach to the epsilon expansion of generalized hypergeometric functions

Assuming that the parameters of a generalized hypergeometric function depend linearly on a small variable ε$\epsilon$, the successive derivatives of the function with respect to that small variable are evaluated at ε=0$\epsilon =0$ to obtain the coefficients of the ε$\epsilon$-expansion of the function. The procedure, which is quite naive, benefits from simple explicit expressions of the derivatives, to any order, of the Pochhammer and reciprocal Pochhammer symbols with respect to their argument. The algorithm may be used algebraically, irrespective of the values of the parameters. It reproduces the exact results obtained by other authors in cases of especially simple parameters. Implemented numerically, the procedure improves considerably, for higher orders in ε$\epsilon$, the numerical expansions given by other methods.     

6m大容积焦炉烘炉实践与体会

介绍了 6 m大容积焦炉由冷态到转入正常加热温度的烘炉操作过程中 ,按照一定的升温曲线 ,通过对焦炉热工和炉体膨胀的科学管理 ,确保新建焦炉顺利由冷态过渡到生产状态。     

三氯化铁为插入剂制备膨胀石墨

探讨了三氯化铁为插入剂的膨胀石墨的制备技术，分析了反应物与膨胀容积、硫含量之间的关系。     

陶瓷材料断裂韧性测试新技术：静态爆破剂预制裂纹的研究

准确测试陶瓷材料断裂韧性Ｋ１Ｃ的关键是预制具有原生裂纹的试样。本文以单边切口梁法测试Ｋ１Ｃ为基础，提出了一种简便而有效的陶瓷材料原生裂纹的预制方法－静态膨胀法。研究结果表明：静态膨胀法中裂纹的扩展是稳态的；通过调节影响微裂纹产生与扩展的多种因素，可以准确地控制裂纹扩展的深度，预制出合适的原生裂纹，为准确评价结构陶瓷的断裂韧性提供了一种有效可行的方法。     

热膨胀硅橡胶在复合材料成型工艺中的应用

简要介绍了热膨胀硅橡胶的性能和特点,热膨胀模成型工艺的原理,并应用其研制了复合材料制件。热膨胀硅橡胶适于制造热膨胀芯模。     

低温快烧无铅精陶釉的研制

采用高温熔融法制备了适用精陶的低温无铅熔块，并应用热膨胀分析仪、SEM等方法研究了精陶釉的光泽度、热稳定性、热膨胀系数等性能。结果表明：采用Li2O，SrO，B2O3等复合熔剂，可以制备出光泽度高，热稳定好，坯釉膨胀系数匹配，结合良好，适于低温快烧工艺的无铅精陶釉。     

Thermal Expansion Behavior of the Si3N4-Whisker-Reinforced Soda-Borosilicate Glass Matrix Composite

Thermal expansion behaviors of a Si₃N₄-whisker-reinforced sodaborosilicate glass matrix composite are studied. An abrupt increase of the coefficient of thermal expansion is observed and is attributed to formation of crystobalite in the sodaborosilicate glass matrix. This thermal expansion behavior is discussed with special reference to the phase transformation of the crystobalite.