APDT-00三极放电管全自动打印机的研制

介绍了新近研制的APTD - 0 0三极放电管全自动打印机的结构特点及整机设计的关键技术 ,阐述了自动上料机构、打印机构和控制电路的设计     

Deposition mechanisms in langmuir-blodgett films

As part of a study of the possible application of polymerisable Langmuir-Blodgett (LB) films as ultra-fine-line e-beam resists, an investigation of the variation of film structure of 22-tricosenoic acid with differing deposition conditions has been made. Unexpected effects with significant implications for deposition speed and resist sensitivity have been observed, and the new techniques for film characterisation developed during the investigation have resulted in a revised model of deposition explaining the observed independence of the disorder causing optical scattering and the macroscopic features observed by polarised microscopy.     

一步法合成松香改性酚醛树脂

探讨了一步法合成松香改性酚醛树脂的反应机理，确定了最佳原料组成及合成工艺，由此制备出高溶解粘度和矿油容纳度的松香改性酚醛树脂，是一种性能优异的高级胶印油墨连接料     

Studies on Catalytic Side-Chain Oxidation of Nitroaromatics to Aldehydes with Oxygen

The side-chain oxidation of 2-nitrotoluene in liquid phase in the presence of catalytic amount of manganese sulfate and stoichiometric amount of potassium hydroxide with oxygen was studied. In the most favorable conditions, over 80% of conversion of 2-nitrotoluene and 50% of selectivity to 2-nitrobenzaldehyde was achieved. Effects of the reaction parameters on the conversion of the reactant and the selectivity of the product were examined. These results, together with EPR spectroscopic study, show that a benzyl anion was formed in the early stage of the reaction, which was then converted to the final product via a free radical mechanism.     

硝酸铵的膨化机理研究

膨化硝酸铵是一种自敏化改性硝酸铵,由硝酸铵溶液在专用表面活性剂作用下,经真空强制析晶工艺制得.文中研究了膨化硝酸铵制备的膨化过程和专用表面活性剂的作用,结果表明:在真空和表面活性剂作用下,硝酸铵溶液由不饱和状态至饱和状态,进而达到过饱和状态,最终导致硝酸铵的快速结晶和体系的膨胀.在真空干燥过程中,形成中心空穴、微细孔道和裂缝,它们使膨化硝酸铵的起爆感度提高;专用表面活性剂具有降低硝酸铵溶液表面张力、发泡剂和加快结晶成核的作用.     

Growth condition of iodine-doped n+-CdTe layers in metal-organic vapor phase epitaxy

Iodine doping of CdTe layers grown on (100) GaAs by metal-organic vapor phase epitaxy (MOVPE) was studied using diethyltelluride (DETe) and diisopropyltelluride (DiPTe) as tellurium precursors and ethyliodine (EI) as a dopant. Electron densities of doped layers increased gradually with decreasing the growth temperature from 425°C to 325°C. Doped layers grown with DETe had higher electron densities than those grown with DiPTe. When the hot-wall temperature was increased from 200°C to 250°C at the growth temperature of 325°C, doped layers grown with DETe showed an increase of the electron density from 3.7×10¹⁶ cm⁻³ to 2.6×10¹⁸ cm⁻³. On the other hand, such an increase of the electron density was not observed for layers grown with DiPTe. The mechanisms for different doping properties for DETe and DiPTe were studied on the basis of the growth characteristics for these precursors. Higher thermal stability of DETe than that of DiPTe was considered to cause the difference of doping properties. With increasing the hot-wall temperature from 200°C to 250°C, the effective ratio of Cd to Te species on the growth surface became larger for layers grown with DETe than those grown with DiPTe. This was considered to decrease the compensation of doped iodine and to increase the electron density of layers grown with DETe. The effective ratio of Cd to Te species on the growth surface also increased with decreasing growth temperature. This was considered to increase the electron density with decreasing growth temperature.     

A NEW APPROACH FOR THE CLASSIFICATION AND ENUMERATION OF UNIQUE REACTION ROUTES AND UNIQUE OVERALL REACTIONS IN MULTIPLE CHEMICAL REACTION SYSTEMS

The methodology of response reactions (RERs) introduced earlier from thermodynamic and kinetic considerations is used in this work to develop a new algorithm for the classification and enumeration of unique/direct reaction routes (RRs) and overall reactions (ORs). According to the RERs approach, a unique set of both RRs and ORs may be generated starting from any conceivable set of linearly independent RRs and ORs. In particular, the direct ORs may be most conveniently enumerated starting from the formula matrix of the terminal species (reactants and products), i.e., without any relation to the elementary reactions comprising the detailed mechanism. Depending on the type of ORs produced by the RRs one can distinguish between two distinct types of direct RRs. Namely, one option is to define a direct RR by specifying the intermediate species that need to be eliminated. This type of RR is referred to as Milner RRs. The other option is to require the direct RRs to produce RERs, thus resulting in RRs referred to as Happel-Sellers RRs.     

基于故障树与灰关联分析的鱼雷故障诊断

将灰色关联度与故障树联合运用于鱼雷故障诊断,为鱼雷的故障诊断提供了一种新途径。在鱼雷动力系统故障树诊断模式识别中,运用灰色系统理论中的灰关联分析,通过进行关联度计算及排序,对各种故障模式发生的可能性大小作出了判断,从而为处理故障的轻重缓急、控制故障的发生以及改进系统的可靠性提供了理论依据。实例诊断表明,这种方法是有效可行的,并且诊断结果可靠。     

川东北三叠系飞仙关组鲕滩气藏有利储集层的形成与分布

川东北地区三叠系飞仙关组鲕滩气藏是近年四川盆地碳酸盐岩天然气勘探取得重大突破的领域，目前在中国石油探区内已发现罗家寨、渡口河、铁山坡等大中型气藏。对鲕滩气藏白云岩储集层进行岩心观察、显微薄片分析，并进行微量元素、流体包裹体、X衍射、阴极发光及电子探针等分析，结果表明，白云岩化和多期溶蚀是形成优质白云岩储集层的关键因素，混合云化与埋藏云化的叠加作用是形成孔隙性白云岩储集层的基本条件。飞仙关组鲕滩气藏储集层经历了4期溶蚀作用，即同生期溶蚀作用、浅埋期溶蚀作用、深埋期溶蚀作用和抬升期溶蚀作用，形成优质白云岩储集层的主要溶蚀作用是浅埋期和深埋期的溶蚀作用。优质白云岩储集层主要分布在台缘鲕粒滩相带，纵向与亮晶鲕粒灰岩呈韵律性互层，横向主要分布在鲕粒滩坝靠近漏湖-潮坪一侧。