Frequency response function of magnetic bearings using high-temperature superconductor

A high-temperature superconductor YBa₂Cu₃O_7-x with strong pinning force has allowed stable magnetic suspension with no control to be developed. Two types of superconducting magnetic bearings (SMB) using YBCO and permanent magnet were assembled. The two types are radial and axial. The dynamic stiffness of each SMB as it was cooled down under a magnetic field by liquid nitrogen was measured both radially and axially. As a result, it was found that the spring constants of these SMBs were almost as large as a practically desirable value; however, their damping coefficients were lower than the practical level. These findings are useful as one of the data bases for development of an optimum SMB design to support the weight of rotors in an axial direction.     

流体在环形狭缝中流动时园柱体的微振动

本文讨论了在两个园柱体的环形狭缝中不可压缩流体的流动．在一定的假设下，运用流体力学方程和流体对柱体的作用方程，导出了附加质量和转动惯量、振动频率和衰减系数．并对文（１）中的某些结果进行了必要的修正．     

高砂比压裂技术研究

应用由美国ＮＳＩ公司引进的“ｓｔｉｍｐｌａｎ”拟三维压裂设计软件，对影响裂缝内支撑剂铺置浓度的诸因素进行了灰色关联度分析，从中找出了主要的影响因素。并以高砂比压裂的技术指标为依据，研究了在目前压裂工艺水平下，进行高砂比压裂所必须遵循的原则。文中还对国内的高砂比压裂进行了实例分析，进一步论证了文中的观点。     

乙烯裂解炉辐射段流动与燃烧的三维数值模拟

用计算流体力学软件Fluent6.2对中国石油化工股份有限公司燕山分公司E-BA-107乙烯裂解炉辐射段内的流动和燃烧做了三维数值模拟研究。为保证计算的准确性,使用GAMBIT2.2软件建立了与裂解炉实际尺寸完全一致的几何模型;在计算过程中采用了标准k-ε湍流模型、离散坐标辐射模型和有限速率/涡流耗散燃烧反应模型等计算模型。通过模拟计算得到了裂解炉炉膛内的温度、烟气流速及烟气组成的分布:底部燃烧器和侧壁燃烧器的燃烧使附近的炉墙处于温度分布均匀的高温区,为裂解反应提供了均匀的辐射墙面;炉管底部比其他部位的温度低;底部燃烧器的高速射流产生的旋涡可为炉管提供一定的对流热;出口烟气的平均温度和组成的模拟计算值与设计值接近,表明数值模拟有较高的精度,具有实际意义。     

中国第一口超千米深水钻井液技术

LW3-1-1探井位于中国南海珠江口盆地，作业水深1480m，完钻井深为3843m，地层以大套灰色泥岩和页岩为主，具有强水敏性．要求钻井液具有良好的流变性、润滑性、抑制性，良好的抗盐、抗钙、抗高温和抗低温能力，以及强的天然气水合物抑制能力。该井采用了PFMX钻井液体系，钻井周期为49d，介绍了钻井液工艺及现场应用情况。PFMX体系表现出很多油基钻井液的优点，如好的润滑性、高的钻进速率、膜效应、强的井眼稳定及页岩抑制性，解决了强水敏性地层的井壁稳定等问题，还解决了深水钻井中遇到的挑战，如低的破裂压力梯度、天然气永合物、浅层水流、深水低温等问题，满足了该区块作业需要。     

Effect of Post Annealing on the Microstructure and Magnetic Properties of NdFeB/α-Fe/NdFeB Thin Films

A series of nanocomposite thin films, composed of Nd2Fe14B and α-Fe, has been prepared by DC-magnetron sputtering combined ion beam sputtering onto Si (100) substrates. The effects of post annealing on the microstructure and magnetic properties of [NdFeB/α-Fe/NdFeB]-type thin films have been investigated. The X-ray diffraction (XRD) study showed that annealing of the films for 30min at temperatures 550,600,650,700℃ resulted in the appearance of diffraction peaks, characteristic for Nd2Fe14B tetragonal structure, α-Fe and Nd2O3 phases. The investigation using the Vibrating Sample Magnetometer (VSM) with a maximum applied field of 2 T indicated that with the increase of the annealing temperature, the magnetic properties of the multilayer films were improved and reached peak value at 650℃ (Hci=41.72kA·m-1, Mr/Ms=0.4, (BH)max=30.35kJ·m-3), after which the magnetic properties were decreased greatly. Along with the increase of the thickness of α-Fe layer from Tα-Fe16nm, the coercivity Hci, saturation magnetization Ms, and remanence ratio Mr/Ms all declined. As the Atomic Force Microscope (AFM) indicated, after being annealed at 650℃ for 30min, the sample was showed fine surface morphology with grain size 60nm≤dα-Fe≤80nm and 100nm≤dNdFeB≤150nm.     

电脉冲快速退火对铁基非晶合金性能的影响

采用大电流交流脉冲对非晶Ｆｅ７８Ｂ１３Ｓｉ９合金进行了去应力退火。初步探讨了电脉冲加热对加热速率和该合金内应力释放、退火脆化以及最终软磁性影响的基本规律。结果表明：电脉冲加热可以得到远高于常规退火的加热速率，选择合适工艺参数可使非晶合金内应力释放９０％，软磁性（Ｈ＿ｃ和Ｂ＿ｓ）达常规退火后的９５％以上，与此同时使合金的延性（断裂应变ε＿ｆ）维持在０．９以上，从而有望实现非晶合金磁性与延性的合理配合。     

Current ISI and monitoring technologies in European energy industries

This paper reviews available information on the state of practice of inservice material property monitoring performed in European energy industries. Current practice includes a range of standard nondestructive testing and monitoring methods, improved remote sampling and surveillance specimen testing, and new monitoring techniques which are emerging from ongoing development programs. These new technologies include ultrasonic, positron annihilation, neutron diffraction, and magnetic techniques.     

电流变流体的研究进展

电流变流体是近年来逐渐受人们重视的一种功能材料，本文介绍其国内、外发展过程及研究现状。     

岩石液压致裂中几个问题的研究

论证了流体压力变化与岩石强度变化之间的关系，阐述了流体保持与释放的应力条件和构造环境，总结了两种围岩下的液压致裂模型及其流量方程。