攀钢镀锌线退火炉辐射管应用特点及其性能分析

介绍了攀钢连续热镀锌机组中退火炉辐射管的应用特点，并对U型辐射管和W型辐射管的热效率、表面温度分布及使用寿命等技术性能进行了深入的分析。     

Tailoring the adhesion of optical films on polymethyl-methacrylate by plasma-induced surface stabilization

Adhesion of plasma-deposited optical and protective coatings, such as amorphous hydrogenated silicon nitride, SiN_1.3, on polymethyl-methacrylate (PMMA) substrates has been found to be limited by a cohesive failure inside the PMMA bulk. Using direct exposure to a low pressure plasma in helium or to vacuum ultraviolet (VUV) radiation generated from plasma, the adhesion of SiN_1.3 at high humidity and elevated temperature has been substantially increased. Using a multitechnique analytical approach, the enhanced adhesion was attributed to the initial etching of the weak boundary layer followed by formation of a crosslinked, graded, mechanically stabilized layer in the interfacial region (interphase), which possesses a physical thickness of 50 to 100 nm and a microhardness of about 2 GPa.     

激光强化处理参数对轧辊表面性能的影响

通过试验，研究了激光功率、光斑直径、扫描速度、搭接量和合金粉含量等激光处理工艺参数对轧辊表面性能的影响，结果表明，轧辊表面经激光淬火处理后。性能稳定，耐磨性和抗疲劳性均有所提高，达到了生产要求．     

Surface texture analysis based upon the visually acquired perturbation of surface normals

A novel technique has been developed for the textural analysis of Lambertian surfaces while in the presence of a variable albedo. The method has direct application for the surface quality determination of cosmetically sensitive components, and has particular application where more traditional methods may prove unsatisfactory. A photometric stereo technique is used to facilitate the isolation of localised irregular features, such as scratching, indentations or small protrusions, which may be obscured by a coincident, regular or random surface albedo. A generic lighting arrangement is employed, which obviates the need for a customised lighting configuration. This represents a significant advantage for the configuration of industrial vision-based inspection systems. Promising experimental results have been obtained using example components, and are presented in the paper.     

几种求作曲面交线的方法

通过实例介绍了应用辅助球面法、直线辅助投射法、空间透视仿射变换法等求作非回转曲面参与相贯的曲面交线的投影问题     

周铣加工表面形貌仿真新算法

考虑主轴偏心，基于周铣过程中刀具切削刃上任意点与工件相对运动的轨迹方程和周铣过程几何特征，构造出可以求解周铣加工表面上任意一点形貌高度值的三维表面形貌仿真算法，并给出了相应的仿真算例。该算法无需对刀齿进行微段离散，并且不依赖于工件网格划分，加工表面上任意一点形貌高度值的计算次数等于刀具齿数，具有通用性好、运算速度快、结果准确度高的特点。     

An Analytical Equation of State for Alkaline Earth Metals

In this work, an analytical equation of state based on statistical mechanical perturbation theory, which was initially developed for normal fluids and can be applied to predict the P–V–T data for saturated liquid alkaline earth metals, is presented. The equation of state is that of Ihm, Song, and Mason, and the temperature-dependent parameters of the equation of state are calculated from a corresponding-states correlation as functions of the reduced temperature. Two scaling constants are sufficient for this purpose, the surface tension and the liquid density at the melting point. The equation of state is used to predict the saturated liquid density of molten alkaline earth metals from the melting point up to 2000 K, for which experimental data exist, within an accuracy of 5%.     

太钢不锈钢冷轧板材质量、性能改进技术的分析

太钢作为国内最大的、惟一的不锈钢全流程宽带钢生产企业，在国家的支持和有关科研院校的帮助下，以企业自主开发为主体，围绕不锈钢冷轧板主要品种，在提高不锈钢冷轧板内在质量和表面质量方面进行了技术研发。笔者对其有关技术进行了总结，并就产品实物质量与国际水平进行了比较。结果表明：太钢不锈钢冷轧板材质量达到国际先进水平，这对于带动我国不锈钢生产技术的快速发展，提高不锈钢的国产化率和国际市场竞争力具有重要意义。     

声表面波谐振器无源无线传感虚拟仪器系统

分析了在通用硬件平台上结合软件设计的声表面波谐振器无源无线传感虚拟仪器系统。该系统通过设计虚拟仪器实现部分硬件功能,控制闭环系统实现自动检测,并采用数字信号处理方法提高检测系统的精度,从而避免了通常的复杂硬件系统,降低硬件成本,并使检测更灵活。本文介绍了设计原理和系统构成,并对系统的误差进行了分析。实验表明:该仪器系统能够达到5m的无线检测距离。     

A Gradient-Simulated Annealing Algorithm of Pre-location-Based Best Fitting of Blank to Complex Surfaces Machining

The algorithm is divided into two steps. The first step pre-locates the blank by aligning its centre of gravity and approximate normal vector with those of destination surfaces, with largest overlap of projections of two objects on a plane perpendicular to the normal vector. The second step is optimizing an objective function by means of gradient-simulated annealing algorithm to get the best matching of a set of distributed points on the blank and destination surfaces. An example for machining…