饮用水中挥发性三卤甲烷(THM)_s测定方法的改进

本文使用吹扫捕集法来前处理水样,用带有电子捕获检测(ECD)的气相色谱仪来测定水中三卤甲烷(THM)_s。水样加标回收率在85%～115%之间,相对标准偏差在5%左右。实验结果表明,该法具有简单、快速、灵敏的特点。     

CX6112车铣复合机床设计方案的研究与探讨

文章较系统地论述了车铣复合机床设计方案的形成过程，同时分析了该设计方案的持点，并简要介绍了该产品的主要技术参数和用途，简评了该产品的技术水平。     

WDB620高强钢应用于大型蜗壳的焊接制造工艺研究

2005年初,水电十四局承担了漫湾二期水电站和小湾水电站蜗壳的制造任务。蜗壳钢材选用国产600 MPa级别高强钢,为了全面综合地考核该级别钢种的材料强度和安全裕度,检验模拟大型蜗壳焊接制造工艺的可靠性。对国产的WDB620高强钢进行了可焊性和制造工艺性试验研究,并在国内首次设计、制造模拟压力容器并对其进行水压试验和爆破试验。研究成果通过中国水电集团公司鉴定,结论为该课题研究成果达到国内选进水平。     

ROI-based Watermarking Scheme for JPEG 2000

A new region of interest (ROI)-based watermarking method for JPEG 2000 is presented. The watermark is embedded into the host image based on the characteristics of the ROI to protect rights to the images. This scheme integrates the watermarking process with JPEG 2000 compression procedures. Experimental results have demonstrated that the proposed watermark technique successfully survives JPEG 2000 compression, progressive transmission, and principal attacks.     

Km高温抗蚀耐磨涂料在省煤器中的应用

锅炉省煤器磨损一直是困绕锅炉稳定运行的主要因素之一。本介绍了Km高温抗蚀耐磨涂料的性能、特点，以及在实际生产中的使用情况，通过实践充分肯定了Km高温抗蚀耐磨涂料的可行性、可靠性和经济性。     

核磁共振测井在桩1区块底水稠油油藏开发中的应用

针对桩1区块特高含水期底水稠油油藏的开发特点,利用核磁共振测井资料定量评价其孔隙流体流动特性,准确划分产层,直接识别油、水层,准确地评价了区块剩余油分布情况.依此部署了水平井,取得了很好的开发效果.实践证明,核磁共振测井具备常规测井所不具备的某些技术优势,能解决一些特殊的地质问题,有广泛的应用前景.     

斜井前置液加砂技术现场应用

中原油田斜井(井斜20°)水力压裂过程中易产生多裂缝和存在严重弯曲摩阻,常出现早期脱砂现象。油、气井压裂后初期产量高,但递减快,稳产时间短(100d),累积产量少。针对这些问题研究了前置液加砂技术,现场应用结果表明,前置液中加入粉砂能有效控制压裂液滤失,降低储层伤害,实现裂缝深穿透,而且粉砂能支撑微裂缝,提高压裂效果;前置液加中砂能有效降低裂缝弯曲摩阻,提高施工成功率。应用该技术,中原油田斜井压裂成功率由初期的50%提高到95%以上,有效率88%,有效期延长了50d以上,应用效果显著。     

谈谈职业教育的大众性

对职业教育的大众性问题进行了论述、实证分析和理论、政策、改革等思考。     

一种矿山用钢筋网自动化焊接生产线的设计

设计一条钢筋网自动化焊接生产线，包括经料送料平台、纬料自动分料及上料机构、多点电阻点焊机、接料平台、卸料机械手。从上料到出料依靠电机、汽缸之间的协调工作来实现。并由单片机和PLC实现控制功能，上位机用MCGS组态软件在整个过程监视现场，采集工作状态及参数，起到监控作用。     

Tandem queues with general blocking: A unified model and comparison results

We study tandem queues with finite intermediate buffers and develop a general blocking scheme that unifies and generalizes various blocking schemes previously studied in the literature, such as manufacturing blocking, communication blocking, kanban blocking and its variations. In the general blocking scheme, job movement and service at each stage are controlled by three parameters, which represent, respectively, the upper limits (at that stage) on work-in-process inventory, finished goods inventory, and buffer space. We derive a set of recursive equations that characterize the dynamics of the system, in terms of the job completion and departure processes, and establish comparison results for these processes in the settings of stochastic ordering, variability ordering and stochastic convexity. Free of distributional assumptions, the results provide characterization of system behavior with respect to the control parameters as well as to the arrival and service processes. We also compare system performance under two different modes of operation: make-to-order versus make-to-stock, and demonstrate the trade-off between improving service and reducing inventory. Numerical studies are also presented to illustrate the diversity of performance trade-off, including composition of inventory, offered by the general model.Supported in part by NSF under grant ECS-89-96201.