双波长分光光度法测定自来水中Fe2+和Fe3+的含量

采用双波长分光光度法测定 Fe2 和 Fe3 的方法 ,结果表明 ,在 λ1 =4 0 0 nm,λ2 =5 4 2 nm处 ,显色时间在 6 0 min～ 80 min,p H =4～ 5时能联合测定水中 Fe2 和 Fe3 ,其结果具有较高的精密度和准确度。     

Photocurrents and degradation rates on particulate TiO2 layers: Effect of layer thickness, concentration of oxidizable substance and illumination direction

Different routes for immobilization of TiO₂ on conducting substrates were compared to find active and stable photocatalysts, which could either be operated in open circuit (photocatalysis) or with applied electric potential (photoelectrocatalysis). The advantage of applying an electric potential was investigated. Polarization curves and photoelectrochemical degradation reactions served to characterize catalysts and to find a way of predicting the optimum synthesis conditions. The difference between front side (EE) and back side (SE) illumination is discussed as a function of layer thickness, as well as the influence of oxidizable substance concentration on photocurrents. Stability of catalysts was investigated in repetitive degradation experiments.     

Outdoor attractancy of males ofMatsucoccus josephi (Homoptera: Matsucoccidae) andElatophilus hebraicus (Hemiptera: Anthocoridae) to synthetic female sex pheromone ofMatsucoccus josephi

The active component of the sex pheromone ofMatsucoccus josephi is (2E,6E,8E)-5,7-dimethyl-2,6,8-decatrien-4-one; the chemical is also a powerful kairomone of adult males and females of the bugElatophilus hebraicus the principal predator ofM. josephi. The presence of theZ isomer (2E,6Z,8E)-5,7-dimethyl-2,6,8-decatrien-4-one does not interfere with the attractancy of the activeE component forM. josephi males or the bug. Our results show a clear dose-response between trap catch ofM. josephi males andE. hebraicus. Conversely, increasing amounts of theZ isomer in the mixture did not affect the attraction of the scale insect males or the bug. The catch ofM. josephi males did not differ significantly among traps of different color, and was significantly higher with traps attached to the tree trunk than those suspended between trees. Comparison of the catch ofM. josephi among the three forests and between pine species suggests that the level of infestation ofPinus halepepsis andPinus brutia ssp.brutia is similar, despite the fact that the latter pine is resistant to the scale insect. Both sexes ofE. hebraicus were trapped in much lower numbers at the more infested sites. This may be related to interference with the activity ofE. hebraicus due to deterioration and drying of parts of the tree crowns and heavy colonization by generalist predators in injured trees.     

分形及分维在单轴向三维编织复合材料拉伸实验中的应用

基于分形几何的计盒维数研究了三维编织复合材料拉伸实验的断裂样照,结果表明,该材料的断裂曲线具有统计自相似性,在不同的尺度范围内具有不同的空间分布格局;而计盒维数定量地表征了其尺度变化规律;准静态和低应变率加载条件下材料的分维数较大,表明其空间占据程度较大,曲线弯曲结构复杂,这是因为低应变率加载时材料内部结构断裂时间不同造成;而高应变率加载时,断裂曲线分维数较小,曲线空间占据小,弯曲结构比较简单,这是由高应变率加载时材料内部结构断裂时间差异缩小造成。     

沉淀法制备Nd~(3+)掺杂改性的钛酸钡

用共沉淀法合成了BaTiO3,研究了Ba1-xNdxTiO3系Nd3+施主一次掺杂在x=0.03~0.065之间时,BaTiO3基陶瓷电容器的本征电性能。结果表明,在此含量范围掺杂的情况下,陶瓷呈绝缘性,Nd3+含量在0.03~0.055左右时随着Nd3+含量的增加,陶瓷的ε增加,Tc呈下降趋势,tgδ值下降。Zr4+的加入也可使材料的ε增加,Tc下降。Mn2+的加入对材料的本征电性能影响不大。Ba1-3x/2NdxTiO3配比比Ba1-xNdxTiO3配比的材料的温度特性要好。     

SO4^2-／MxOy固体超强酸催化合成1，4-二氧六环

以乙二醇为原料,采用颗粒型SO4^2-／MxOy固体超强酸倦化剂，在常压、气相条件下,固定床催化合成了1。4-二氧六环；同时考察了不同反应温度、原料配比、进料速度等条件对催化反应的影响．并对上述影响因素进行了探讨。产品经气相色谱，红外光谱及质谱分析。结果表明。原料在260℃温度条件下，以进料流速为0．12mL／min为最佳反应条件。在该实验条件下，1。4-二氧六环的生成产率达到60％-70％左右。该合成工艺应用固体超强酸催化剂具有较高的催化活性、化学稳定性好、无环境污染。是工业生产1，4-二氧六环较理想方法，具有良好的工业生产前景。     

载体预处理对Pd/C催化剂催化性能的影响

研究了活性炭硝酸表面改性对以其为载体制备的负载钯催化剂性能的影响。利用表面官能团滴定、N₂物理吸附和扫描电镜对催化剂进行表征，以邻硝基氯苯催化加氢制备2，2'-二氯氢化偶氮苯反应为模型反应对催化剂的性能进行评价。结果表明，经过不同浓度的HNO₃处理，活性炭孔结构性能变化不大，但是活性炭表面酸性含氧基团的浓度有了较大程度的增长，为Pd金属粒子的沉积提供了大量的吸附位，提高了Pd金属的分散度，从而制得高活性的Pd/C催化剂。通过30%HNO₃ 60 ℃水浴中回流4 h处理的活性炭可以达到最佳效果，所制得催化剂的活性是以未经硝酸处理过的活性炭载体制备的催化剂活性的2.3倍。     

动力有限元在三维编织复合材料弹道冲击性能研究中的应用

三维编织复合材料具有高的层间剪切强度,高的损伤容限和显著的抵抗裂纹扩展的能力。三维编织复合材料弹道性能的研究一般局限于实验观察阶段。本文运用数值计算方法对三维编织复合材料细观结构有限元模型进行弹道冲击性能研究,得出了合理的结果,说明了这种方法的有效性。     

高岭土合成4A分子筛的研究

以高岭土为原料合成出了４Ａ分子筛，得出经过碱化处理可提高分子筛吸附容量的结果；同时分析了反应温度和反应时间对合成分子筛吸附性能的影响。     

3,5-二羟基苯甲醇的简便合成方法

以３，５ 二羟基苯甲酸为原料，经酯化、酰化、硼氢化锂还原等改进步骤合成了３，５ 二羟基苯甲醇，总收率达７５％，提供了一条较为简便的适合于工业化生产的合成方法。