热光双稳态的临界入射功率与临界温升

本文考虑到F—P腔夹层介质和后反射镜均具有一定的吸收时,推导出产生热致色散光学双稳态的临界入射光功率P_c和临界温升△T_c的数学解析表达式。理论计算的 △T_c值与实验值非常符合。为了得到最佳光学双稳态回线和避免腔内的纵向温度梯度,夹层介质和后反射镜应具有一定的匹配吸收。     

回转窑测温系统安装与调试

木文介绍了回转窑温度测量系统的安装与调试。     

衰减曲线分析的诺模图

基于Arps递减方程,建立了衰减曲线分析的诺模图。应用该诺模图,可以方便地确定油气田的可采储量。     

论军事院校文化建设与管理

校园文化直接影响高质量人才的培养和塑造。校园文化包括：求实的校风，优良的环境，活跃的学术，良好的素质，丰富的文化生活。讲究科学方法，抓好校园文化建设，是建设高质量军事院校的关键。     

Image segmentation towards new image representation methods

Very low bit-rate video coding has recently become one of the most important areas of image communication and a large variety of applications have already been identified. Since conventional approaches are reaching a saturation point, in terms of coding efficiency, a new generation of video coding techniques, aiming at a deeper “understanding” of the image, is being studied. In this context, image analysis, particularly the identification of objects or regions in images (segmentation), is a very important step. This paper describes a segmentation algorithm based on split and merge. Images are first simplified using mathematical morphology operators, which eliminate perceptually less relevant details. The simplified image is then split according to a quad tree structure and the resulting regions are finally merged in three steps: merge, elimination of small regions and control of the number of regions.     

一个低电阻率油气藏的测井评价

根据J油田大量岩芯分析资料,应用油藏流体分布理论和毛管压力计算方法,研究该油田低电阻率油气层的形成原因认为:地层水矿化度高(多数>20万ppm);微细孔隙发育,束缚水含量高;粘土矿物含量高且分布在碎屑颗粒表面等是形成低电阻率油气层的主要原因.一般常规测井评价时,对这种低电阻率油气层容易误释而丢弃.依据油气藏流体分布原理,应用毛管压力方法计算原始含油饱和度,可准确地识别出这种低电阻油气层,并可预测其产能.     

离子注入硅的线源非相干光瞬时退火温度计算

本文利用高温模型,计算了在我们的实验条件下对离子注入硅进行线源非相干光瞬时退火的退火温度,并与实验结果比较,两者符合得较好。     

风力发电与变流器

讨论了目前流行的两种主流风力发电系统：变速恒频双馈风力发电系统和永磁直驱同步风力发电系统。着重分析了两种风电变流器的拓扑结构、工作原理和性能特点,对风力发电系统发电机、变流器、无功支持和低电压穿越能力等方面进行了论述。     

分布式光纤测温在动力电缆温度监测中的应用

动力电缆温度监测是可以及时发现电缆线路过热点位置和检测运行线路的绝缘状态,从而保障电缆安全稳定运行的技术措施。针对电缆过热事故的主要原因和特点,提出采用分布式光纤测温技术对电缆沿线温度进行监测预警,给出了分布式光纤测温系统的原理、组成和光缆布设方案,此系统对保证电力系统的安全运行有重要意义。     

A novel compact low-power direct conversion receiver for mobile UHF RFID reader

A novel direct conversion receiver with low cost and low power is implemented in a 0.18 μm 1P6M standard CMOS process for a Mobile UHF RFID reader.A highly linear active mixer with low flicker noise and low noise active load is proposed.An efficient and low cost on-chip DC offset voltage canceling scheme is adopted with a high-input-impedance four-input OPAMP to buffer the output of the DC offset canceller(DCOC) block.The receiver has a measured input 1 dB compression point of 2 dBm and a sensitivity of 72 dBm in the presence of the large leakage signal from the transmitter.Only occupying a silicon area of 2.5 mm 2 and consuming 21 mA from a 1.8 V supply,the receiver makes the mobile UHF RFID reader to communicate with a transponder in a distance of 1 m conveniently.