干熄焦循环气体成分的分析和控制

分析了干熄焦循环气体成分，针对可燃气体成分爆炸的极限值，控制及制定循环气体成分的指标。     

Surface modification of a biomedical poly(ester)urethane by several low‐powered gas plasmas

Several low‐powered gas plasmas were employed to treat a biomedical poly(ester)urethane using the treatment gases of CO₂, O₂, NH₃, and SO₂ with different treatment time (2, 5, 10, and 15 min). The changes of the physical and chemical characteristics of the biopolymer surface were studied. Surface morphology was evaluated by scanning probe microscopy, which showed increased roughness of the surface after plasma treatment. The wettability of the surface was examined by static water contact angle (SCA) measurements, which presented that there was a decrease of SCA in all plasma treatments compared with the untreated surface and that each gas plasma had an optimum treatment time accompanied by a minimum contact angle. X‐ray photoelectron spectroscopy indicated the changes of the surface functional groups. The data demonstrated that CO₂ and O₂ plasmas resulted in the incorporation of oxygen‐containing groups, while NH₃ plasma resulted in the combination of nitrogen‐containing groups, and SO₂ plasma resulted in the formation of sulfur‐containing groups. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1273–1282, 2006     

制定合理的价格政策促进天然气化工的发展--西气东输工程的天然气利用问题

分析了天然气化工用户对低气价承受能力的原因,指出要真正实现天然气在化工领域的应用首先要靠国家政策鼓励,其次要靠本身取得更多的技术突破.提出了对我国天然气定价机制的改革意见,呼吁我国各方面的技术力量要优先重视3种新工艺的开发研究,即天然气制合成气、天然气制乙烯和天然气制液体燃料及芳烃.     

PH敏感性水凝胶的分子热力学模型

本工作是在非离子凝胶的分子热力学模型基础，引入Ｄｏｎｎａｎ平衡项和大分子离子链的静电排斥项对凝胶自由能的贡献，建立了一个新的离子凝胶的分子热力学模型。该模型在解释离子凝胶的ＰＨ敏感性及其各种影响因素，以及预测ＰＨ溶胀曲线方面都取得了较好的效果。     

碳四烷烃催化裂解制低碳烯烃的研究进展

论述了碳四烷烃催化裂解制低碳烯烃的催化剂体系、影响因素及催化裂解方式。该催化剂体系包括硅铝酸盐及锆硫酸盐,氧化铝与碱金属或碱土金属的混合物,负载型催化剂等3种类型。其中分子筛(晶体硅铝酸盐)及其改性催化剂是研究开发的主要方向。除操作条件外,稀释剂、引发和抑制剂和裂解反应方式对催化裂解反应均有影响。催化裂解反应机理与催化剂的种类和反应条件相关。对于酸性分子筛催化剂有2种比较公认的机理:正碳离子机理,自由基与正碳离子机理两种形式。研究表明碳四烷烃,特别是正丁烷催化裂解制低碳烯烃具有良好的低碳烯烃收率,收率可达50%以上。     

气相色谱法测定饲料香味剂中香味成分的含量

用气相色谱氢火焰离子化检测器，SE－52毛细管柱对四甲苯做内标，分别饲料香味剂中NB－68200香精液组分的含量，分离效果好。     

Al2O3／TiB2／SiCW陶瓷刀具加工镍基合金时的磨损机理研究

研究了Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ陶瓷刀具加工Ｉｎｃｏｎｅｌ７１８镍基合金时的切削性能和磨损机理。结果表明；在低速切削条件下，Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ和硬质合金刀具的抗后刀面磨损的能力相差不大；而在高速切削条件下，前者的抗后刀面磨能力远高于后者。     

微生物法处理含硫工业废气

指出了含硫工业废气传统处理方法的缺陷 ,介绍了微生物处理方法的优势所在 ;对微生物菌种的共同特征以及无机硫和有机硫脱除时菌种的选择依据进行了讨论 ,并对微生物法脱硫的机理进行了分析 ;评述了国内外生物滤池法、生物滴滤池法和生物吸收法等生物膜法脱硫的工艺及其工业化应用。指出了微生物法脱硫技术有待深入研究的问题、发展趋势和应用前景。     

Quantitation of volatile compounds in heated triolein by static headspace capillary gas chromatography/infrared spectroscopy-mass spectrometry

Static headspace and capillary gas chromatography/infrared spectroscopy-mass spectrometry were used to collect, separate, identify and quantitate the oxidative and thermal decomposition products in heated triolein. Approximately 4 L of triolein was heated in a deep-fat fryer at 190°C for 12 h each day for a total of 60 h, until it contained>-20% polymeric material. The concentration of heptane and octane increased after 12 h heating, then decreased upon further heating, while the concentration of volatile aldehydes decreased gradually during heating. After 12 h of heating, the concentrations of the major volatiles changed as follows: heptane (16.36 to 30.17 ppm), octane (24.48 to 40.77 ppm), heptanal (21.68 ppm to 9.11 ppm), octanal (35.53 to 36.64 ppm), nonanal (68.95 to 43.16 ppm), (E)-2-decenal (135.00 to 89.00 ppm) and (E)-2-undecenal (88.50 to 61.00 ppm). After 60 h of heating, when the oil contained over 20% polymeric material, the concentrations of heptane, octane, heptanal, octanol, nonanal, (E)-2-decenal and (E)-2-undecenal were 5.16, 4.39, 5.45, 7.02, 18.07, 12.50 and 6.00 ppm, respectively.     

从煤炭、天然气制取石油石化产品工艺技术

在阐述煤炭、天然气通过吹氧气化制取CO +H2 合成气联产石油石化产品的基础上 ,详细介绍了甲醇、二甲醚、乙烯生产工艺技术的应用与开发 ,对各种工艺路线进行了论证和技术经济评估