鱼类耳石扫描电镜样品制备与观察

本文介绍了一种鱼类耳石样品的扫描电镜制样方法，通过对草鱼耳石进行包埋，抛磨，并用合适的腐蚀剂处理，用ＳＥＭ成功地观察了耳石的日轮及超微结构，该方法简便易行，保证所观察耳石样品的微观结构完整与清晰。     

Photo-reversible Reaction in Polymer Langmuir-Blodgett Films

Preparation of photoreactive Langmuir-Blodgett (LB) films was carried out using polymers/oligomers prepared from long-chain dialkyl esters of di-and tetra-olefins and having cyclobutane rings in the main chain. These polymers/oligomers formed stable monolayers on a water surface when mixed with arachidic acid. These monolayers could be deposited onto a substrate successfully forming Y-type films. The oligomer LB films were polymerized on irradiation. The polymer LB films showed a photo-reversible process between polymers and oligomers, depending on wavelength of the irradiating light. On the basis of spectral data and molecular weight change, this behaviour was found to be caused by cleavage and formation of cyclobutane rings.     

A new approach to the mechanism of chlorine evolution: Separate examination of the kinetic steps using ac impedance on a rotating thin ring electrode

In the absence of a bulk diffusion effect, it is shown for the first time that the impedance spectra for the chlorine evolution reaction on a rotating thin ring electrode comprise three consecutive semicircles in the capacitive half of the complex plane. The first (highest frequency) semicircle is due to the charge-transfer resistance for chloride discharge and the simultaneous chlorine adsorption coupled to the double-layer capacitance. The second semicircle (around 5 Hz) is due to the adsorption and desorption of a chlorine intermediate. The third (lowest frequency, around 0.5 Hz) semicircle is due to the relaxation of surface oxygen species. The impedance data allow the steps of the overall reaction to be examined individually. On a Pt surface the rate of chloride discharge and simultaneous chlorine adsorption (the admittance of the first semicircle) is first order with respect to chloride concentration and has a potential-dependence close to 58 mV/decade. The rate of the adsorption and desorption process (the admittance of the second semicircle) is second order with respect to chloride concentration, and has a potential dependence close to 30 mV/decade. The time constant for the adsorption/desorption processes is ca 20 ms, independent of electrode potential in the range studied. These features are consistent with a mechanism in which a faster discharge reaction (Cl⁻ Cl_ad + e) is followed by a slower surface combination reaction (2Cl_ad → Cl₂), but inconsistent with mechanisms in which ion + atom desorption is predominant, the initial chloride discharge is slow, or a unipositively charged chlorine species is involved.     

航空齿轮表面硬化层断裂性能研究

按照航空齿轮的具体工艺过程，对材料12Cr2Ni4A的拉伸试样和断裂试样进行设计和加工，通过三点弯曲实验，重点研究了齿轮材料硬化层的硬度分布，硬化试样拉伸力学性能参数和断裂性能参数，实验结果表明，所采用试样的加工工艺方案是可行的，所获得的Kc基本反映我国航空硬化齿轮材料的断裂性能特征，为定量预测航空硬化齿轮疲劳寿命提供实验和理论分析的依据。     

减小磁滞损耗的偏转磁芯设计

本文通过对偏转磁芯用的铁氧体材料的磁滞损耗特性的分析 ,提出了通过改变偏转磁芯外表面形状以减小磁滞损耗的方法。优化计算结果表明 ,对于Philips 17″CMT的 3C2材料 5mm壁厚的磁芯 ,改用椭圆外表面的磁芯后 ,磁滞损耗降低了 2 7 5 %。     

轴齿轮断齿失效分析

通过对轴齿轮断口形貌、硬度测试及金相组织等试验进行分析表明，齿根处没有进行硬化处理造成齿根处抗疲劳性能不足是导致轴齿轮疲劳断裂的主要原因，另外齿根过渡处倒角过小，且存在纵向刀痕引起了较大应力集中也是导致轴齿轮疲劳断裂的原因。     

新型电潜螺杆泵减速器齿轮干涉问题的研究

为保证齿轮设计的正确性，介绍了新型电潜螺杆泵减速器齿轮传动中存在的各种干涉现象及产生的原因和避免的条件，通过分析计算给出了避免各种干涉的变位系数的取值范围和措施。     

Proton and hydrogen formation by cyclohexyl benzene during overcharge of Li-ion batteries

This study provides experimental evidence for proton and hydrogen formation caused by the anodic electropolymerization of cyclohexyl benzene (CHB), which is a popular electrolyte additive for overcharge protection of lithium-ion batteries (LIBs). It is found that considerable H₂ evolution is observed in overcharged LiCoO₂/graphite cells, especially when CHB is included as an electrolyte additive. In order to confirm the proton generation during the CHB oxidation, Pt/Pt-rotating ring disc electrode (RRDE) measurements are performed in 1 M Li(C₂F₅SO₂)₂N ethylene carbonate/ethyl methyl carbonate (1/2, v/v) solutions with and without CHB. The cathodic ring current is intimately correlated to the anodic disc current, and the cathodic reaction at the ring is determined to be the reduction of the proton. The proton generation efficiency during the CHB oxidation is as high as 90%. Proton liberation is also observed during the anodic decomposition of the electrolyte solvents, although it occurs in a much less stoichiometric way compared with that during the CHB oxidation.     

利用5A284型铣齿机加工转盘螺旋锥齿轮探讨

利用引进设备5A284苏联铣齿机加工石油钻机转盘螺旋锥齿轮，建立计算程序并进行调整计算，详述了遇到的问题及解决方法，使所加工的锥齿轮质量良好。     

PLC在环锭捻线机上的应用

介绍了如何使用PLC和数字变频调速技术 ,对传统环锭捻线机进行技术改造 ,使锭速、捻度和卷绕成形变换实现数字化柔性控制 ,扩大了工艺参数的变化范围 ,使整个捻线加工车间实现信息化管理成为可能。