无捻毛巾产品毛羽问题的分析与实践

对无捻毛巾产品毛羽问题进行了分析,对成因进行了初步探索.通过试验,制定了较为有效的改进措施和工艺.无捻毛巾制品的毛羽问题得到改善,并控制在一个较为合理的范围内.     

1等标准光滑圆柱环规检测装置

本装置是在具有高精度导轨的SIP三坐标测量机上架设激光干涉仪作为测量标准器，利用电感测微仪作为瞄准器，使测量可以直接溯源到激光波长，实现了1等标准光滑圆柱环规的高精度测量。装置对φ50mm标准环规直径测量的不确定度达到70．15μm。通过与瑞士国家计量局和国家计量院的比对测量证实，无论在国内还是国际环规测量方面，该装置已达到先进水平。     

Study on the Intelligent System of Gear Pitch Deviation Measurement and Analysis

The intelligent controlling and data process of pitch error measurement is proposed. The whole system takes C++ as the development tool and takes advantages of object-oriented and visualization, having the advantages of easy operation and humanistic interface. In the meanwhile, the system can be complemented and improved according to the demand of user, having certain independence. The research of the system provides an efficient and reliable way to measure and analyze the gear pitch, which can be referenced in the future research.     

Surface modification of starch nanocrystals through ring‐opening polymerization of ε‐caprolactone and investigation of their microstructures

Bionanoparticles of starch obtained by submitting native potato starch granules to acid hydrolysis conditions. The resulted starch nanoparticles were used as core or macro initiator for polymerization of ε‐caprolactone (CL). Starch nanoparticle‐g‐polycaprolactone was synthesized through ring‐opening polymerization (ROP) of CL in the presence of Sn(Oct)₂ as initiator. The detailed microstructure of the resulted copolymer was characterized with NMR spectroscopy. Thermal characteristic of the copolymer was investigated using DSC and TGA. By introducing PCL, the range of melting temperature for starch was increased and degradation of copolymer occurred in a broader region. X‐ray diffraction and TEM micrographs confirmed that there was no alteration of starch crystalline structure and morphology of nanoparticles, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Kinetics study of Ti[O(CH2)4OCHCH2]4 initiated ring‐opening polymerization of ε‐caprolactone by differential scanning calorimetry

Chemical shrinkage was used for the in situ measurement of the progressing chemical stabilization reactions and the influence of ozone during the stabilization of polyacrylonitrile. A method for evaluating the activation energy through the sensitivity temperature is presented. The calculated results show that the activation energies were 161.57 kJ/mol in air and 181.23 kJ/mol in ozone-enriched air. Therefore, the chemical reactions were postponed during stabilization in ozone-enriched air. Ozone seemed to act in three ways: first, ozone promoted the formation of the serious skin–core structure. Second, ozone accelerated the chemical reactions and shortened the stabilization time at lower heating rates. Third, ozone postponed the chemical reactions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

邯钢西区煤气管网改造及效果分析

介绍了邯钢为减少煤气放散，节约能源，采用环网供应混合煤气的有效方法。提高了供气可靠性，取得了很好的经济效益。     

大型机械搅拌槽槽底结构设计

根据大型机械搅拌平底槽槽底结构的设计实践 ,分析了其设计要点 ,介绍了适用于大型机械搅拌装置的槽底结构。     

起落架落震试验飞机机轮三向冲击位移的动态测量

为了研究飞机起落架受冲击载荷时的功量吸收状况，须在起落架落震试验中，对飞机着陆瞬间起落架机轮在空间三个方向上冲击位移的动态变化量进行测量。为此，本文设计了四自由度空间定位装置，并使其与计算机连接，实现了落震试验过程中，起落架在高速冲击状态下机轮三向位移的有效测量与记录。     

组建实时可靠安全的工业以太网

工业以太网在企业的信息层、控制层和设备层网络中得到了越来越多的应用。本文从实时性、网络弹性、可靠性和安全性的角度对工业应用的具体要求进行了分析，提出了在组建工业以太网时需要注意的若干主要问题。     

抽油机球铁齿轮的化学成分及生产工艺

为提高抽油机减速器齿轮铸件的机械性能，提出以Sn代替Mo作为合金元素，并通过试验确定了合理的Si、Cu、Sn的加入量。指出Si加入量应控制在1．9％－2．1％范围内，同时加入0．36％～0．9％的Cu和0．025％～0．07％的Sn，可保证球铁的强度和延伸率都满足QT700－2的要求。鉴于试件与实际铸件的表面硬度有一定的差值，为提高铸件表面硬度，进行了余热正火试验，并给出了铸件在铸型内的时间－冷却温度曲线。最后根据球铁化学成分的选择结果，进行了齿轮生产试验。