Characterization of CuInS2 thin films for solar cells prepared by spray pyrolysis

We have made a study of the chemical composition, the electrical, the optical and the structural properties of polycrystalline CuInS₂ thin films prepared by spray pyrolysis to be used for thin film solar cells. These films were deposited starting from aqueous solutions with different chemical compositions ([Cu]/[In] and [S]/[Cu] ratios) and at different substrate temperatures. In all cases, the material is p-type with grains preferentially oriented in the (112) direction of the sphalerite structure. The electro-optical properties show a very strong dependence on the [Cu]/[In] ratio in the solution. Films with copper excess have smaller resistivity and better crystallinity than those which are stoichiometric or have indium excess. The results obtained in this work show the possibility of having CuInS₂ thin films with a wide range of resistivity, a fact that could be important for making solar cells based on this material.     

Diurnal and environmental characterization of solar photovoltaic panels using a PC-AT add on plug in card

This article describes the development of an instrumentation system for characterizing photovoltaic panels. It uses an add on card (which contains DAC, ADC and digital input/output ports) in conjunction with a PC-AT. The panels in a field are selected in succession through a set of relays actuated by the digital output port. The selected panel is loaded in discreet steps by a transistor loading circuit which is activated by the digital to analog convertor to trace the most significant portion of the I-V curve. The data shows that the power output is invariably lower than that specified by the manufacturer. The reasons for drop in output have been analyzed. It is shown that these effects can be represented by the curvature of I-V characteristic at the maximum power point (OP). The loss of power due to accumulation of dust and the increase in temperature of the panels can be significant.     

High temperature low cycle fatigue

Fatigue at high temperature is a complex phenomenon as it is influenced by a number of time-dependent processes which become important at elevated temperatures. These processes include creep, oxidation, phase instabilities and dynamic strain ageing (DSA), acting either independently or synergistically influence fatigue behaviour, often lowering the fatigue life. Current design approaches employ linear summation of fatigue and creep damage with suitable factors on permissible damage to take care of uncertainties in interaction between cyclic and time-dependent processes. It is, therefore, important to develop a deeper understanding of the processes that occur during high temperature fatigue so that realistic life predictions could be made. Results on the high temperature fatigue behaviour of austenitic stainless steels, ferritic steels and nickel base alloys are presented here. The important mechanisms of interaction of high temperature time-dependent processes with fatigue under various conditions are discussed in detail. Emphasis is placed on cyclic stress response, fatigue life, deformation substructure and fracture behaviour. This is followed by a review of important life prediction techniques under combined creep-fatigue loading conditions. Life prediction techniques considered here include linear damage summation, strain range partitioning, ductility exhaustion approach, frequency modified and frequency separation methods, techniques based on hysteresis energy and damage rate models, and methods based on crack-cavitation interation models.     

Interference effects from grammatically unavailable constituents during sentence processing.

Evidence from 3 experiments reveals interference effects from structural relationships that are inconsistent with any grammatical parse of the perceived input. Processing disruption was observed when items occurring between a head and a dependent overlapped with either (or both) syntactic or semantic features of the dependent. Effects of syntactic interference occur in the earliest online measures in the region where the retrieval of a long-distance dependent occurs. Semantic interference effects occur in later online measures at the end of the sentence. Both effects endure in offline comprehension measures, suggesting that interfering items participate in incorrect interpretations that resist reanalysis. The data are discussed in terms of a cue-based retrieval account of parsing, which reconciles the fact that the parser must violate the grammar in order for these interference effects to occur. Broader implications of this research indicate a need for a precise specification of the interface between the parsing mechanism and the memory system that supports language comprehension. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

AN EXPERIMENTAL INVESTIGATION OF THE GROWTH OF SMALL CORNER FATIGUE CRACKS IN ALUMINIUM 6061-T651

Results of an experimental investigation of the fatigue growth of small corner cracks emanating from small flaws are presented. Growth-arrest behaviour was observed, and increases in crack length during growth periods were of the order of the transverse grain size. For the test material, the corner crack front intersects, on average, only three–six grains in the small crack regime monitored, so only a small number of constrained, interior grains is encountered. It is suggested that the presence of partially constrained surface grains may contribute to the 'anomalous' growth behaviour which has been observed by a number of investigators.
The crack growth histories of the test data presented exhibit considerable scatter. It is shown that a Student's t -test can be used to estimate confidence intervals in order to provide a measure of the observed scatter. The variation in confidence intervals in the transition from small to long fatigue crack growth is discussed.     

以数字搜索树表示的二值图象的几何变换

本文介绍以数字搜索树表示的二值图象的一种几何变换算法，文中讨论了四分区与正四边区的基本关系，输出ＤＳＴ结点成立的充分条件，给出了完整的几何变换算法并对算法的复杂性作了分析。     

C-V模型与工业CT相结合的几何测量方法

针对工业生产中复杂封闭内腔几何尺寸很难测量的问题,提出一种基于C-V模型的工业CT几何测量方法.首先利用C-V模型提取目标边缘坐标点的有序链码,然后利用Green定理和欧氏距离公式计算目标区域的面积和周长.在提取目标边缘坐标点的步骤中,把边缘灰度先验知识融入C-V模型以提高测量精度;在计算目标区域的面积和周长的过程中,合理地选择目标边缘有序坐标点和插值有序坐标点,再一次提高几何测量精度.实验结果表明,与2DFacet模型测量方法相比,文中方法测量精度约提高1个数量级;并已将该方法应用于实际中.     

An improved bacterial foraging algorithm for combined static/dynamic environmental economic dispatch

Economic dispatch is carried out at the energy control center to find out the optimal output of thermal generating units such that power balance criterion is met, unit operating limits are satisfied and the fuel cost is minimized. With growing environmental awareness and strict government regulations throughout the world, it has become essential to optimize not only the total fuel cost but also the harmful emissions, both, under static as well as dynamic conditions. The static environment economic dispatch finds the optimal output of generating units for a fixed load demand at a given time, while the dynamic environmental economic dispatch schedules the output of online generators with changing power demands over a certain time period (normally one day) so as to minimize these two conflicting objectives, simultaneously. In this paper, the price penalty factor approach is employed for simultaneous minimization of cost and emission. The generator ramp rate constraints, non-convex and discontinuous nature of cost function and the large number of generators in practical power plants, make this problem very difficult to solve. Here, a fuzzy ranking approach is employed to identify the solution which offers the best compromise between cost and emission objectives.     

Portability of three consumer products

Three consumer products (a television set, a personal computer and a typewriter), all considered portable by their respective manufacturers, were evaluated experimentally for portability. Products were not considered portable if the physical and subjective workloads resulting from carrying them over specified distances were excessive. Twenty-two males and six females participated in the experimental investigation and carried the three products for distances of 45·72, 91·44. 137·16 and 182·88 m. Their pulse and ratings of perceived exertion (RPE) of the arms and whole body were recorded and used as measures of physical and perceived workloads. Both physiological and subjective responses to carrying products were significantly influenced by the type of product and carrying distance, regardless of the gender of the person performing the carrying. The results of this study and the design guidelines provided in the literature for one-handed and two-handed carrying tasks led to the conclusion that, of the three products, only the television set could be considered portable.