Effects of resin chemistry on redox polymerization of unsaturated polyester resins

Unsaturated polyester resins are the most widely used thermoset resins in the composite industry. In this study, three well‐defined unsaturated polyester resins were used. These resins have similar number‐average molecular weights, and they have different numbers of C?C bonds per molecule. The reaction kinetics of unsaturated polyester resins was studied using a differential scanning calorimeter (DSC) and a Fourier transform infrared (FTIR) spectrometer. The glass transition temperature of the isothermally cured resin was also measured. Trapped radicals were observed in the cured polyester resin from electron spin resonance (ESR) spectroscopy. Considering the diffusion‐limitation effect, a simple kinetic model was developed to simulate the reaction rate and conversion profiles of polyester vinylene and styrene vinyl groups, as well as the total reaction rate and conversion. Experimental results from DSC and FTIR measurements compare favorably with the model prediction. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 211–227, 2002; DOI 10.1002/app.10317     

Glass Formation and Properties in the System Calcia-Gallia-Silica

The glass-formation region of the calcia-gallia-silica system was determined. The glasses within this region were measured to have a density of 3 to 4 g/cm³, a refractive index of 1.6 to 1.73, an Abbe number between 35 and 58, a thermal expansion coefficient of 6.5 × 10⁻⁷/°C to 11.5 × 10⁻⁷/°C, softening temperatures between 730° and 790°C, and a Vickers microhardness of 5.2 to 7.3 GPa. Crystalline phases were identified along the glass-formation boundary. Infrared transmission spectra were used to explain glass structures and their effect on glass properties. The results suggest that the role of calcia in the glass structure is similar to that for calcia in calcium aluminosilicate glasses.     

R2O3对SnO-ZnO-P2O5无铅玻璃性能的影响

以SnO-ZnO-P2O5(SZP)系统作为低温玻璃材料的研究对象,结合其形成区域,研究了R2O3(Al2O3、B2O3)对SZP玻璃化学稳定性、膨胀系数、转变温度和软化温度等性能的影响。     

基体树脂对长玻璃纤维增强PP力学性能的影响

采用在线混合设备制备了长玻璃纤维(LGF)增强聚丙烯(PP)复合材料(LGF-PP),研究了基体性质及界面相容剂对LGF-PP力学性能的影响。基体树脂熔体流动速率的增加,使最终LGF-PP中的玻璃纤维长度从5.63 mm增至8.56 mm,提高了力学性能。与均聚PP比较,以共聚PP为基体树脂的LGF-PP冲击强度高出约10%,但其他性能略差。界面相容剂有利于增强玻璃纤维与PP的界面结合,拉伸强度和拉伸模量明显增加,但是冲击强度降低了20%～30%。     

应力分布的光学图像处理研究

玻璃中的应力会损害玻璃制品的寿命,降低产品的性能。为了得到玻璃的应力分布,研究了偏振光干涉的光学图像与材料内部应力分布的关系,分析了在白光照射下的光学图像,利用MATLAB软件中的图像处理工具,对图像进行编程处理,从而得到了玻璃的应力分布图。研究结果表明,彩色图像整体处理结果反映了玻璃的应力分布图,能适用于玻璃应力值的计算,也能帮助技术人员了解玻璃内部应力的分布情况。     

pH玻璃电极的现状与发展

对pH玻璃电极的结构、原理以及特性进行了综述.与液体充填式玻璃电极比较,固体接触式pH玻璃电极有明显的优点.叙述了固体接触式pH玻璃电极膜的成分及其响应机理,并指出固体接触式pH玻璃电极的发展方向.     

烟气脱硫技术在浮法玻璃线上的应用

简介了烟气脱硫技术在浮法玻璃线上的应用情况,以工程实例详细介绍该技术在某浮法玻璃线上的设计、实施、应用情况以及重点、难点问题的处理,为该技术在浮法玻璃线的应用提供借鉴和参考.     

悬浮法合成固体粒状丙烯酸树脂

研究了悬浮法合成固体丙烯酸树脂颗粒。讨论了不同软硬单体配比对丙烯酸树脂颗粒的玻璃化转变温度、相对分子质量及其分布的影响以及不同的引发剂及悬浮剂对其聚合过程、最终产物形态及上述性能的影响。制得的丙烯酸树脂的数均相对分子质量用凝胶渗透色谱(GPC)测定为3.9×104～6.2×104,相对分子质量分布为2.04～2.32;用红外光谱图表征了制得的丙烯酸树脂结构。差示扫描量热法(DSC)测定了聚合物的玻璃化转变温度(Tg)。     

High styrene–rubber ionomers,an alternative to thermoplastic elastomers

High styrene rubber ionomers were prepared by sulfonating styrene–butadiene rubber of high styrene content (high styrene rubber) in 1,2‐dichloroethane using acetyl sulfate reagent, followed by neutralization of the precursor acids using methanolic zinc acetate. The ionomers were characterized using X‐ray fluorescence spectroscopy, Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR), dynamic mechanical analysis (DMA), and also by the evaluation of mechanical properties. The FTIR studies of the ionomer reveal that the sulfonate groups are attached to the benzene ring. The NMR spectra give credence to this observation. Results of DMA show an ionic transition (T_i) in addition to glass–rubber transition (T_g). Incorporation of ionic groups results in improved mechanical properties as well as retention of properties after three cycles of processing. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2294–2300, 2002     

刑事案件现场中微量玻璃的检验及应用

论述了刑事案件现场上微量玻璃检材的组成、提取与包装、检验方法以及在侦破刑事案件中的应用.