碲酸盐系统玻璃组成和结构对非线性光学性能的影响

碲酸盐系统重金属氧化物玻璃是一种优秀的非线性光学玻璃材料，具有较大的三阶非线性光学效应、超快光学响应、较宽红外透过范围、较好稳定性以及广泛应用前景。碲酸盐系统玻璃中的中间离子和网络外离子的加入会改变组成网络的配位多面体组成、键性和能带结构，进而影响玻璃的非线性光学性能。探讨了碲酸盐系统玻璃的网络结构，阐述了玻璃组成、结构以及纳米簇和非线性光学性能之间的相互关系。     

Electrical Resistance Measurement of Glass Transition and Crystallization Characteristics of Zr—Al—Cu—Ni Metallic Glasses

In this paper,glass transition and thermal stability of the Zr-Al-Cu-Ni metallic glasses were investigated by using electrical resistance measurement(ERM),DSC and X-ray diffraction techniques.The experimental results show that the ERM is capable of detecting the glass transition of the amorphous alloys and can help to distinguish the crystallization products of the Zr-Al-Cu-Ni metallic glasses owing to the difference of the electrical resistivity between the precipitation phases.     

A study of neutron and gamma radiation effects on transmission of various types of glasses, optical coatings, cemented optics and fiber

A study of radiation effects on various types of glasses, dielectric optical coatings, cemented optics and fiber was undertaken with a view to select them for extreme radiation environments. Samples were exposed to different radiation doses in the Pakistan Research Reactor-I (PARR-I) for neutron and Cobalt 60 source for gamma irradiation. Transmissions were measured before and after irradiation. The dielectric coatings were subjected to additional tests (adhesion, abrasion and humidity, etc.) as per MIL-M-13508C and MIL-C-675C. All 15 glasses studied showed varying amounts of transmission loss as expected, with negligible degradation for three types. Recovery of transmissions with time/ageing was also studied, with more or less complete recovery with temperature annealing. A faster bleaching of darkened/brown glasses was achieved by using UV lamps or UV laser. The dielectric coatings (HR, AR) and one of the two commercial optical cements showed excellent resistance to neutrons and gamma radiations, and could be good candidates for the fabrication and utilization of optical components in extreme radiation environments. The data allowed several Chinese glasses to be studied for the first time.     

K_2O－B_2O_3－SiO_2玻璃成分对析晶性能的影响

本文利用ＤＴＡ、ＸＲＤ、ＴＥＭ、ＳＥＭ等技术研究了三种Ｋ２Ｏ－Ｂ２Ｏ３－ＳｉＯ２玻璃的析晶性能。结果表明，Ｋ２Ｏ－Ｂ２Ｏ３－ＳｉＯ２玻璃的析晶由分相引起，分相和析晶能力受成分影响较大。随Ｂ２Ｏ３和Ｋ２Ｏ含量增多及Ｋ２Ｏ／Ｂ２Ｏ３比值的降低，析晶加强。析晶中主晶相类别尚未查清，次晶相确定为α－方石英。     

含钴锆基块状非晶合金的制备与力学性能

采用水淬法制备了Zr—Ti—Cu—Ni—Be—Co块状非晶合金(BMGs)。使用XRD进行相分析，采用热分析仪进行玻璃转变温度、晶化温度和热稳定性等的测定，用SEM观察试样压缩后的外表面和断口形貌。研究了Co对Zr—Ti—Cu—Ni—Be合金非晶形成能力(GFA)、热稳定性及力学性能的影响。结果表明：含Co的所有Zr—Ti—Cu—Ni—Be BMGs都有1个明显的玻璃转变点和宽的过冷液相区(△T）。Zr38Ti17Cu10.5Co12Be22.5合金具有和Zr41Ti14Cu12.5Ni10Be22.5合金相当的△T；Co的添加明显提高Zr—Ti—Cu—Ni—Be BMGs的力学性能，含Co量大于10at％的Zr—Ti—Cu—Ni—Be BMGs的压缩断裂强度（σf）超过2000MPa，Zr38Ti17Co22.5Be22.5合金的σf达到2230MPa，比Zr41Ti14Cu12.5Ni10Be22.5合金的σf提高23％。     

Avrami exponent and isothermal crystallization of Zr/Ti-based bulk metallic glasses

The isothermal crystallization kinetics of Zr/Ti-based bulk metallic glasses (BMGs) have been investigated by using Avrami exponent. It is a constant nucleation rate and a constant number of quenched-in nuclei that cause the linear John–Mehl–Avrami (JMA) modes in Avrami exponents of Zr₆₂Al₈Ni₁₃Cu₁₇ and Zr₆₅Al₈Ni₁₀Cu₁₇ BMGs, respectively. However, sub-T_g pre-annealing of Zr₆₂Al₈Ni₁₃Cu₁₇, and multiple-step phase transition in Ti₄₃Cu₄₃Zr₇Ni₇ and Ti₄₅Zr₅Cu₄₀Ni_7.5Sn_2.5 make their Avrami exponents deviate from the linear JMA mode. The difference in Avrami exponents maybe provides useful information for performing the microstructure control of BMG composites upon isothermal annealing.     

R_2O—BaO—P_2O_5磷酸盐玻璃形成特点和基本性质的研究

磷酸盐玻璃的性质和形成规律的研究比硅酸盐玻璃少得多。由于磷酸盐玻璃的化学稳定性比普通硅酸盐玻璃差,原料价格高等因素,降低了它的实用性。但是磷酸盐玻璃具有某些特殊性能是其他系统玻璃不能达到的,若对特定的磷酸盐系统作适当成分调整后,仍可以获得基本性质较好,有实际应用价值的特种光功能玻璃,如激光介质材料和特种光学     

掺Er^3＋镓磷酸盐玻璃的光学性质

利用熔融淬火法制备了摩尔分数为40．8Ga2O3-58．0NaPO3-1．2Er2O3掺Er^3＋镓磷酸盐玻璃,测试并研究了样品中Er^3＋的吸收光谱、1．5μm发射光谱,根据Judd-Ofelt理论计算了Er^3＋离子强度参量Ωt（t=2,4,6）及自发辐射概率、荧光分支比、自发辐射寿命．结果表明,Er3＋1．5μm发射光谱半峰全宽达到40nm．同时,利用McCumber方法计算了Er^3＋4 I13／2→^4I15／2跃迁的受激发射截面,峰值达到6．10×10^-21cm^2,测定了Er^3＋4I13／2能级荧光寿命为4．88ms,^4I13／2能级量子效率为56．3％．     

Cu基Cu-Zr-Al块体非晶合金的成分设计

利用变电子浓度经验判据，从Cu—Zr亚组元体系中的最深共晶点Cu61．8Zr38.2和次深共晶点Cu56Zr44出发，连接第三组元Al，建立(Cu61.8Zr38．2)1-xAlx和(Cu56Zr44)1-xAlx变电子浓度线．电子浓度在1．24—1．30的(Cu61．8Zr38．2)1-xAlx合金可通过铜模吸铸法形成直径为3mm的块体非晶；对于(Cu56Zr44)1-xAlx系列合金，块体非晶形成的电子浓度区间为1．28-1．36．热分析结果表明，每条变电子浓度线上块体非晶合金的热稳定性和玻璃形成能力随电子浓度增大而增加．其中，(Cu61．8Zr38.2)1-xAlx变电子浓度线上的非晶合金Cu58．1Zr35．9Al6(e／α=1．3)具有最高的热稳定性和最大的玻璃形成能力，其特征参数Tg=760K，Tg／Tl=0．648，皆高于已报道的最优成分Cu55Zr40Al5(Tg=722K，Tg／Tl=0．614)。