影响铁精矿K2O、Na2O、SiO2含量的因素分析

用统计分析方法 ,分析了影响精矿K2 O、Na2 O、SiO2 含量的因素 ,并根据分析结论提出了对生产工艺进行定向控制的条件     

Low-cycle fatigue properties of eutectic solders at high temperatures

This paper details the deformation mechanism and low‐cycle fatigue life of eutectic solder alloys at high temperature (around 0.8T_m). Grain boundary sliding generally nucleates a wedge‐type cavity that reduces the low‐cycle fatigue life of metals. In this study, grain boundary sliding has promoted intergranular failure contributing to the reduction in fatigue life of Sn–Ag–Cu alloy. However, grain boundary sliding has exerted no deleterious effects on fatigue resistance of eutectic Pb–Sn and Bi–Sn alloys. The phase boundary sliding with very fine microstructure induces exceptional ductility in these alloys leading to superior low‐cycle fatigue endurance for theses eutectic Pb–Sn and Bi–Sn alloys.     

粮食筒仓中测温电缆的受力分析

埋在粮食筒仓中构件的受力量值的大小是筒仓结构设计中是不容忽视的问题，可作为特种结构土建结构设计人员计算参考．     

AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

胜利油区放射性同位素测井的粒径选择

根据胜利油区的地层渗透率、孔隙度，在２７个低渗透油田和４６个中、高渗透油田的放射性同位素测井中进行了粒径为１００～３００μｍ、３００～６００μｍ、６００～９００μｍ放射性同位素１３１Ｂａ微球粒径选择实验，确定了放射性同位素１３１Ｂａ微球的选择原则。当油藏渗透率Ｋ＜１００×１０－３μｍ２、孔隙度＜２０％时，放射性同位素粒径为１００～３００μｍ；当油藏渗透率Ｋ＞１００×１０－３μｍ２、孔隙度＞２０％时，放射性同位素粒径为３００～６００μｍ或６００～９００μｍ。在此基础上得到胜利油区选用同位素粒径明细表，对于指导施工，提高放射性测井资料的可靠性具有重要意义。     

关于解决黄牛鞋面革松面问题的探讨

本文讨论了在黄牛鞋面革生产过程中产生松面的原因，并经过多年的生产实践，摸索出解决松面问题行之有效的技术措施。     

悬沙中D〉0．06mm粗粒的粒析级配组成及其改正方法

本文首先简述Ｄ＞０．０６ｍｍ泥沙的粒析沉降特性及其粒径偏粗的原因。继之对悬沙中粒径大于０．０６ｍｍ的粒析级配组成机理，及级配组成不同对标准粒径Ｄｂ与粒析粒径ＤＬ关系的影响进行了详细研究。在以上研究工作的基础上，开展了Ｄｂ与ＤＬ的比较试验，得出了粗、中、细型悬沙的Ｄｂ～ＤＬ关系和对ＤＬ的改正方法。     

Sidle的远程执行设备

Ｓｉｄｌｅ系统是运行在ＳＵＮ工作站网络上的一组实用程序，利用空闲的处理机资源进行大粒度的并行计算．同其它远程执行设备相比，它能支持程序内部并行和嵌套的远程执行，允许一个服务员机接受多个远程执行任务．本文介绍了这些特点和透明性的实现方法．     

Prediction of Final Product Properties After Cocurrent Spray Drying

The effect of drying and atomization conditions on the physical properties of powders for agglomerate-like materials and skin-forming material are studied in this article. A neural model is used for powder bulk and tapped density predictions.     

高频脉冲电铸Ni-Co纳米复合块体微观结构分析

采用高频脉冲电铸工艺制备出了镍钴纳米复合块体材料，利用场发射扫描电镜、能谱和X射线衍射的方法，重点研究了复合块体沉积层的表面形貌、相结构和结晶取向。结果表明．高频率和润湿剂的添加对沉积层的细化有重要影响，高频脉冲电铸能够获得微观组织致密、均匀的复合块体材料。