Narrowing the gap: Practical strategies for increasing whole‐grain consumption

Overcoming consumer confusion and doubt regarding nutrition recommendations is key to communicating the message to increase whole‐grain foods in the diet. Nutrition communicators may do that more successfully by using four tactics to fashion messages about whole grains: (1) present a positive message; (2) keep it short and simple; (3) keep the message practical and flexible; (4) speak with a united voice. The quantitative recommendation to eat at least three servings of whole‐grain foods daily also must be integrated into national nutrition documents, such as Healthy People 2000, Dietary Guidelines for Americans, the Food Guide Pyramid, Nutrition Recommendations for Canadians, and Canada's Food Guide to Healthy Eating, if we are to be truly successful in communicating the need to increase whole‐grain consumption.     

通信辐射源的潜在细微特征提取方法

为了充分挖掘高维特征空间中辐射源的细微特征, 提出一种基于全局潜在低秩表示(Global Latent Low Rank Representation, GLat-LRR)的通信辐射源潜在细微特征提取方法.首先, 提取通信辐射源信号的瞬时频率, 通过傅里叶变换将信号投影到高维特征空间; 挖掘特征样本之间全局的低秩结构和维度之间全局的潜在低秩关系, 将特征样本集作为整体应用到潜在低秩表示模型中, 利用维度之间低秩关系得到特征样本集的潜在部分矩阵, 每个列向量即为每个通信辐射源信号的潜在细微特征向量.在实际采集的同厂家同型号FM电台数据集上, 该方法提取的潜在细微特征能够显著提高通信辐射源个体识别的性能.     

电解铜箔中异常粒子成长的解析

研究了电解铜箔制造时旨在防止缺陷的镀铜层上发生的异常粒子成长。在Ti基板上形成镀铜层,应用配备有能量耗散x一线分光计的电子扫描显微镜（SEM-EDX）和x一线衍射观察异常粒子析出。异常粒子的发生取决于Ti基材预处理方法。预处理加工时机械抛光发生的Ti粒子与异常粒子成长有关。Ti粒子附近的铜的取向不同于其它部分的镀层。因此Ti粒子与异常粒子成长有关。     

采用快速空间映射算法多模超宽带滤波器有效设计方法

文章用快速空间映射算法（ASM）来优化和设计多模（MMR）超宽带滤波器。快速空间映射算法需要一个粗糙物理模型以及一个精确物理模型。文中用MATLAB来建立粗糙物理模型,使用商业仿真软件HFSS10来建立精确物理模型。快速空间映射算法就是用来找到粗糙模型和精确模型之间的映射关系,从而达到快速和精准设计超宽带滤波器的目的。     

激光预处理基体细化铬层晶粒的电镀机理研究

为了揭示激光淬火预处理钢基体细化镀铬层界面晶粒的电镀机理,采用理论和试验相结合的方法进行了理论分析和试验验证。用化学腐蚀法制备了铬层/激光离散预处理基体界面的两侧（铬层界面与基体界面）,利用扫描电镜研究了铬层界面晶粒形貌,利用激光粗糙度仪测量了基体界面粗糙度;借助电镀理论构建了以过电位为中间变量的铬层界面晶粒尺寸和基体界面粗糙度关系分析模型;取得了粗糙度与晶粒尺寸呈正比的试验结果和粗糙度与晶粒尺寸呈正比的理论关系,得到了淬火预处理钢基体细化镀铬层界面晶粒的电镀机理。结果表明,激光淬火预处理钢基体得到的较小粗糙度可以提高过电位,过电位的提高减小了铬层界面晶粒尺寸。这一结果对进一步解释激光淬火预处理可以提高基体/铬层界面结合强度是有帮助的。     

面向窄节距倒装互连的预成型底部填充技术

近年来随着电子产品的小型化发展,窄节距倒装芯片互连已经成为研究热点。传统的倒装芯片组装后底部填充技术(例如底部毛细填充)在用于窄节距互连时易产生孔洞,导致可靠性降低,因此产业界开发了面向窄节距倒装芯片互连的预成型底部填充技术,主要包括非流动底部填充和圆片级底部填充。介绍了这类新型底部填充技术的具体工艺及材料需求,并提出了目前其在大规模量产以及未来更窄节距应用中存在的问题及挑战,总结了目前产业界在提高量产生产效率、提升电互连的可靠性以及开发纳米级高热导率填料等方面提出的解决方案,分析了该技术未来的发展方向。     

工艺因素对金属封装外引线弯曲疲劳的影响

考察了金属封装外壳制造工艺对外引线弯曲疲劳的影响,发现电镀镍是导致外引线弯曲次数明显减少的最主要工艺步骤,且随镀镍层厚度的增加,弯曲次数减少。此外还讨论了外引线的氢含量和晶粒度对引线抗疲劳能力的影响。     

The microstructure of Cu films deposited by the self-ion assisted technique

The microstructures of Cu films deposited by the self-ion assisted, partially ionized beam (PIB) deposition technique under two different accelerating potentials, 0 KeV and 6 KeV, are compared. The 6 KeV film shows a bimodal (111) fiber and (100) fiber texture with an abundance of twin boundaries and a relatively large average grain size with a typical lognormal distribution. The 0 KeV film consists of small, mostly (111) oriented grains with islands of abnormally large (100) grains. The controlling factors for the abnormal growth of the (100) grains are discussed in relation to the observed microstructures, showing that all factors necessary for abnormal (100) growth are present in the films.     

原位生长柱状晶氧化铝陶瓷材料的制备

按96瓷配比,在α-Al2O3中加入烧结助剂(氟化钙-高岭土),通过水基凝胶注模成型出氧化铝陶瓷坯片.在1570℃,2 h条件下无压烧结,制备出原位生长棒状晶自增韧氧化铝陶瓷.研究结果表明:1570℃烧结时完全生成棒状晶,棒晶呈现三维网络状交织在一起,样品的体积密度达到了3.77 g/cm3.而不含氟化物添加剂的样品在1500～1600℃下烧结时,不能生成氧化铝棒晶,基本呈椭球状或球状.加入少量的氟化物,经过高温烧结,即可在组织内部原位生成棒状晶,这样棒状晶就起到了纤维或晶须的强韧化作用,大大提高了96瓷氧化铝陶瓷的力学性能,断裂韧性达到了5.25 MPa·m1/2,比传统96瓷氧化铝韧性提高了60%.     

COMPOSITION OF NON-STARCH POLYSACCHARIDES IN WORT AND SPENT GRAIN FROM BREWING TRIALS WITH MALT FROM A GOOD MALTING QUALITY BARLEY AND A FEED BARLEY

Worts and spent grains were obtained from pilot-scale brews using malts of two barley varieties differing in malting quality. Triumph was used as an example of a good malting quality barley and Golf as a typical feed grade barley. Arabinoxylan concentrations were similar in worts of both varieties, whereas (1–3), (1–4)-β-glucan concentrations were much higher in wort prepared from Golf malt than in wort from Triumph malt. From the worts, polysaccharide fractions were isolated by ethanol precipitation and characterised. Results indicated the presence of high molecular weight arabinoxylans and (1–3), (1–4)-β-glucans. The arabinose to xylose ratios in the precipitates were considerably higher than in total worts. Methylation analysis showed little differences between precipitated wort arabinoxylans from both varieties. In comparison to water-insoluble arabinoxylans extracted from barley and malt, the precipitated wort arabinoxylans were richer in xylopyranose residues substituted with arabinose residues at both 0–2 and 0–3. Viscosities of the hopped worts of both varieties decreased after treatment with endoxylanase 1 from Aspergillus awamori. This confirms that arabinoxylans play a role in determining wort viscosity, possibly through interactions with (1–3), (1–4)-β-glucans.