The effect of GaN and ain buffer layers on GaN film properties grown on both C-plane and A-plane sapphire

This paper presents a comparative study of the properties of GaN grown by organometallic vapor phase epitaxy, using both a GaN and A1N buffer layer, as a function of sapphire orientation (c-plane vs a-plane). Results are presented for varying the thickness of the buffer layer, varying the growth temperature of the GaN film, and also varying the ammonia/trimethylgallium mass flow ratio. The electron Hall mobilities of GaN films grown on an A1N buffer layer were, in general, higher compared to films grown using a GaN buffer layer. In addition, growth on a-plane sapphire resulted in higher quality films (over a wider range of buffer thicknesses) than growth on c-plane sapphire. The room temperature electron mobilities were also found to be dependent on, not only the growth temperature, but also the ammonia/trimethylgallium mass flow ratio.     

Limited evidence of zebra mussel (Dreissena polymorpha) consumption by freshwater drum (Aplodinotus grunniens) in Lake Winnipeg

Freshwater drum (Aplodinotus grunniens) may be a predator of the invasive zebra mussel (Dreissena polymorpha), which established in Lake Winnipeg in 2013. In this study, the diets, trophic position, and growth of 51 freshwater drum collected in 2019 (six years post-zebra mussel invasion) were compared to 64 freshwater drum sampled in 2000. Benthic insect larvae were the dominant food items in both years. Although mollusks occur in high densities in Lake Winnipeg, they were only consumed by a few freshwater drum in either sample year. Zebra mussels were not a frequent prey item in 2019 as they were only consumed by four of the sampled freshwater drum. Stable isotope analysis of white muscle tissue yielded similar δ¹³C and δ¹⁵N values in both years and were consistent with a benthic, insectivorous diet. Length-at-age data derived from otoliths revealed that the 2019 population had at least an equal growth rate to the 2000 population. Weight-at-length data suggested that fish condition was greater in 2019 than in 2000, which coincided with increased benthic macroinvertebrate density in Lake Winnipeg. Based on these findings, Lake Winnipeg freshwater drum continue to feed predominantly on insect larvae and not zebra mussels.     

论当前粮食仓储工作中的几个问题

本文结合湖北实际,对粮食仓储工作的现状进行了分析,指出了当前存在而应在“八五”期间加以解决的粮仓建设、粮库改革、科学研究、四无粮仓、人才培训五个问题。提出了粮仓建设的量化意见,讨论了粮库改革的方向、储粮科学研完的重点、坚持四无粮仓和提高人员素质的重要性。     

Formation of WC/Ni hard alloy coating by laser cladding of W/C/Ni pure element powder blend

WC/Ni coating was formed by laser cladding of a W/C/Ni powder blend. The formed WC crystals have rectangular or quadrangle cross-section shapes with size of 2–30 μm. Step, twist and cross growth morphologies of WC formation were observed. The coating contains WC, CW_3, WNi, FeW₃C, Fe₆W₆C, W₃O, W, C, and (Fe,Ni) phases.     

GRAIN SHAPE EFFECT IN SUPERPLASTIC DEFORMATION

The method controlling grain shape in TMT processing and the effect of grain shape on char-acteristic parameters in superplastic deformation were discussed.The accommodation velocityof grahl boundary sliding,which is the dominant mechanism in superplastic deformation,andthe contribution of each mechanism to the total strain,as influenced by grain shape,were ana-lyzed.Grain shape has been shown to be an essential structural factor for superplasticity.Thenan analysis was made about the effect of grain shape on the region transition strain rate sothat a new concept,critical aspect for superplasticity,was worked out.These predictions werecompared with the measured results in an Al-Zn-Mg alloy.     

Al-Ti-B-RE细化剂对铝晶粒细化效果初探

对新型细化剂Al-Ti-B-RE的细化效果进行了探讨。结果表明：该中间合金是一种高效、长效的晶粒细化剂，当加入量为0．04％～0．10％，铝熔体在800℃静置30min的细化效果最显著，其效果优于进口Al-Ti-B细化剂。     

焊接热影响区微观结构演化的蒙特卡罗计算机模拟方法

焊接热影响区是影响焊接性能的主要区域。焊接热影响区的晶粒长大常常导致焊接热影响区成为性能薄弱的环节，对焊接热影响区晶粒长大的研究一直是焊接接头的重要研究课题。焊接热影响区微观结构演化与诸多因素密切相关，是一个复杂的过程。运用适当的计算机方法进行模拟，完成对晶粒生长的完全预测，具有重要的意义，可以为优化焊接工艺参数，提高焊接质量提供依据。在此对在模拟焊接热影响区微观结构的演化时采用的基本方法进行综述。     

Mn-Nb-Mo系X70级管线钢奥氏体再结晶规律的研究

研究了Mn-Nb-Mo系XT0级管线钢的再结晶规律，分析了变形温度、变形量等工艺参数对变形奥氏体再结晶百分数的影响，为现场控轧工艺的制定提供了理论依据。     

Numerical simulation of microstructure formation ofAZ91 using mCA method

A stochastic model for simulating the microstructure formation of Mg alloy AZ91 during solidification was developed based on the finite element method（FEM） for macroscopic model of heat transfer calculation and a modified Cellular Automaton （mCA） for microscopic modeling of nucleation, growth of crystal. In this model, the effect of solute redistribution, interface curvature and preferred orientation was considered. A numerical simulation was developed with C＋＋ program language. The computation was carded out to understand the effect of varying processing parameters, such as nucleation parameters and heat transfer coefficient, on the microstructure formation of AZ91. The result of simulation was displayed on screen.     

电、磁场对金属凝固组织的影响及应用

利用外加物理场凝固细晶技术是目前材料加工领域的研究热点。综述了各种电、磁场对金属凝固组织的影响，并对其主要的机理进行了探讨；并对电、磁场在金属凝固成形中的应用和进一步研究进行了展望。