装饰用铝箔的质量控制

简要介绍了我公司生产的3种装饰用铝箔的质量控制措施，使3种铝箔的力学性能、表面质量、板形等满足用户的使用要求。     

6005合金型材代替6063合金型材用于建筑幕墙

根据6005铝合金工业型材的生产经验，对6005和6063铝合金型材的合金成分、力学性能、时效制度、尺寸保证进行分析对比，确定6005铝合金型材代替6063铝合金型材应用于建筑幕墙领域的可行性。     

模板浸润法制备非极性聚合物纳米管和纳米线

以孔径为200 nm的多孔阳极氧化铝(AAO)为模板,采用聚合物溶液或熔体浸润模板的物理方法,以非极性通用聚合物为原料,首次制备了非极性聚合物纳米管、纳米线及其阵列结构。对纳米管和纳米线的形貌和结构进行了表征,结果表明对非极性聚合物而言,温度是影响一维纳米结构的主要因素,在较低温度下只能制得纳米线;较高温度下才能得到纳米管。还指出AAO膜纳米孔的高表面效应与熔体的作用能是形成聚合物一维纳米结构的主要驱动力。     

阻燃硅橡胶的研制

通过测定硅橡胶试片的离火熄灭时间及燃烧速率来判定热硫化硅橡胶的阻燃性。结果表明，氢氧化铝对热硫化硅橡胶具有良好的阻燃效果；随着氢氧化铝用量的增加，硅橡胶的物理机械性能下降。通过对氢氧化铝进行表面处理，并与氯铂酸等阻燃剂配合，可制得符合美国UL-94V-0阻燃标准的硅橡胶制品。在本实验条件下的最佳配比为：100份混炼硅橡胶，45份氢氧化铝，50份氯铂酸(以铂质量计／10^-6)，2份乙炔炭黑及铁锡复合氧化物，制品拉伸强度大于5MPa。     

Simulation of Fe-Al compounds developed during single superphosphate manufacture

In order to analyse iron phosphate complexes and gel-like phases encountered in the single superphosphate process, experiments were performed with a free-Al, Fe apatite crystal of Durango from Mexico phosphate rock and sulfuric acid. Reaction products were studied by X-ray diffraction and surface analysis methods namely X-ray photoelectron spectroscopy and scanning electron microscopy. Results show that in a free Al, Fe-system, part of the Ca(H₂PO₄ )₂.H₂O (MCPM) forms before precipitation of any CaSO₄(CS) and gel-like phase such H₂SO₄.yH₃PO₄.xH₂O is formed. When iron is added, the precipitation rate of (CS) and (MCPM) increases and Fe₃(H₃O)H₈(PO₄)₆.6H₂O is formed. When Fe and Al are added, a gel-like phase is quickly formed with a molar ratio that changes with time and develops into crystalline compounds. The composition of this gel may be represented as a mixture of two phases: H₂SO₄.yH₃PO₄.xH₂O and a gel containing Al-Fe-Si.     

Effect of cation exchange on the distribution and movement of cations in soils with variable charge. I. Effect of lime on potassium and magnesium exchange equilibria

The influence of Ca(OH)₂ on K and Mg exchange equilibria in three New Zealand soils was studied. Calcium hydroxide was mixed with each soil to raise the pH to about 6 or 7. For each Ca(OH)₂ treatment, K and Mg exchange isotherms were determined, from which the equilibrium activity ratios were derived. Exchange coefficients and solution activity ratios were calculated according to the Gapon convention.The addition of Ca(OH)₂ produced varying effects in the Gapon exchange coefficient for both K and Mg. The magnitude and direction of change in the exchange coefficient were related to the cation initially dominating the exchange sites, rate of Ca(OH)₂ addition, soil colloids contributing to the CEC and specific interactions of Ca with these soil colloids.Addition of Ca(OH)₂ reduced the equilibrium activity ratio of all soils. Changes in the bonding strength of K and Mg with increasing CEC were suggested as a possible mechanism for this decrease.     

铝合金交流电氧化工艺的研究

较详细地介绍了采用降压后的交流电市电对含铜或含硅的铝合金的阳极氧化方法和影响因素。实验表明,交流电氧化可以获得膜层厚、硬度高、耐蚀性好的氧化膜。该法也适用于一般纯铝的阳极氧化。     

氢氧化铝粉体表面化学改性的研究

综述了氢氧化铝粉体在应用领域存在的主要问题，解释了氢氧化铝粉体表面化学改性的机理。详细地介绍了国内外氢氧化铝粉体的表面化学改性的方法，主要包括酯化反应法、偶联剂法、表面活性剂吸附法以及聚合物包覆法。经研究表明，氢氧化铝粉体表面化学改性后扩宽了其应用领域，具有良好的前景。     

铝型材加工氧化着色污水处理的工程实践

采用中和—加药混凝—沉淀—压滤除渣的方法处理铝型材加工氧化着色污水。出水pH值及悬浮物等指标满足《污水综合排放标准》GB8978—96中一级排放标准。改气浮法为沉淀法,采用竖流式沉淀池,简化工艺流程,缩短处理时间,节约投资与运行费用。     

AlCl3/活性炭催化甲基三氯硅烷与低沸物再分配反应研究

甲基三氯硅烷(M1)与低沸物(LBR)是工业上"直接法"生产二甲基二氯硅烷单体过程中产生的副产物,两者之间通过再分配反应可转化为高价值的有机硅单体.以活性炭为载体,采用浸渍蒸发煅烧法制备了负载型AlCl3固体酸催化剂,在固定床反应器中进行甲基三氯硅烷与低沸物的再分配反应,制得二甲基二氯硅烷和三甲基氯硅烷.考察了活性炭载体预处理方式及反应条件对再分配反应的影响.结果表明,经过高温扩孔处理的活性炭载体负载的AlCl3催化剂具有较好的反应活性;优化的反应条件为:W(M1/LBR)为2.0～3.0,反应温度为310℃,LHSV为1.5 h-1;该催化剂的制备过程简单,催化反应条件温和且表现出良好的催化稳定性.