Structural Disruption of Toothpastes Under Deformation — An Easy Release of Active Ingredients

The author suggests a technological approach relevant to the optimization of toothpaste compositions with regard to the easy release of the therapeutic ingredients under shear deformation. It is based on the comparative assessment of the steady‐state viscous behaviour of placebo samples (mixtures containing all the components except the therapeutic ingredients) and the final products. It is presumed that the maximum beneficial effect of the toothpastes, as therapeutic agents, is achieved if the final products and the placebo blends display similar shear‐thinning characteristics.     

部分样本雷达信号的参数估计

线性调频信号参数检测是SAR对抗的一个重要问题 ,其估计参数的方法有多种 ,但对于分析部分样本LFM信号而言 ,绝大多数估计方法的误差很大。在用快速相关解线调估计和分析部分样本LFM信号存有误差的基础上 ,提出了一种改进的快速相关解线调算法运用于部分样本LFM信号的起始频率和调频斜率参数的估计 ,减小了误差。最后对改进的算法进行了仿真 ,证实了改进后的有效性。     

双层堤基的井涌破坏与无害管涌

双层堤基水文地质结构特殊，堤基承压水常具独特的“渗而不流”特征。在“不流”条件下，堤后盖层薄弱处受超高承压水头顶裂破坏，产生的局部冒水孔实属承压自流井，由此形成的管涌实质为井涌。底部进水的承压井流影响范围不大，井涌的破坏范围更小，据此可区分出有害管涌与无害管涌。前者局限于堤脚附近，小范围压渗为首选方案；对后者，既无需专门防治，更不必追求根治。     

Formation of C49-TiSi2 in flash memories: a nucleation controlled phenomenon?

The formation of Ti silicides has been examined in flash memories with 0.25 μm linewidth by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. It has been observed that, after the first rapid thermal process and the selective metal etch, there is no silicide on the source and on a majority of drain contacts while C49-TiSi₂ is found on the gate. A pre-amorphisation implant increases drastically the formation of C49-TiSi₂ in the drain zone while modifications of annealing conditions have little impact. These results indicate that the formation of C49-TiSi₂ is most likely controlled by nucleation and that this nucleation is sensitive to both the width and the length of the reaction zone. The formation of a Ti rich silicide may play an important role in this nucleation by decreasing the driving force for the formation of C49-TiSi₂. Curiously enough, the formation of C49-TiSi₂ appears thus as a major concern for the salicide process in flash memories.     

纳米涂层的研究现状与展望

简述了纳米表面涂层制备工艺的研究现状，分析了气相沉积、热喷涂、电刷镀、化学镀和电沉积等不同工艺在制备纳米表面层中的应用情况。介绍了纳米涂层在超硬耐磨、耐腐蚀、耐高温热稳定性等方面研究的新进展，并对纳米涂层的应用范围和领域作了展望。     

Measuring and modeling the rheological data of diglycidylether of bisphenol‐A during polymerization for finite element analyses

Finite element analyses (FEA) of thermosets are often performed on the basis of rheological data for fully cured resin. For the FEA of thermosets during curing, a material model is established and a technique is demonstrated, which allows the rheological data of the linear viscoelastic material to be derived. As the moduli are sensitive to conversion, all measured properties are related to temperature and conversion. Therefore the basis for the rheological data has to be a suitable reaction kinetic. Based on the kinetics shear and compression properties are measured independently and modeled mathematically with the focus to gain a formulation, which is suitable for FEA. The considered time constants are in the range between one second and one month as these times are relevant for the investigated relaxation times. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1868–1872, 2003     

灞河生态治理工程模型试验研究

通过模型试验 ,对位于西安市东郊因采沙使河道破坏严重的灞河河段进行了复现试验和研究 ,并以此为依据 ,通过优化比较为设计部门提供了合理的橡胶坝坝址和坝座高程。在此基础上 ,又对建坝后橡胶坝对上下游冲淤变化的影响进行了试验研究和分析 ,解决了工程设计中的一些关键技术问题     

塔里木山前复杂地层钻头使用技术

利用测井资料结合实测的岩石力学性质、邻井的岩性剖面建立了岩石力学参数模型,综合解释了单井岩石在纵向剖面上的力学性质。借鉴邻井钻头使用情况,以推广高效PDC钻头为主,介绍了山前构造钻头选型情况。针对山前构造的地层岩性特征,从复合片、刀翼形状、齿型、切削齿力平衡等方面设计和改进了PDC钻头。改进后的钻头使塔里木山前复杂地层钻头使用获得了突破性进展。     

Influence of the Temperature of a Body on Its Weight

The physical preconditions are considered for the temperature of a body to influence the force of gravity experienced by it. The results are given of experiments on weighing metal rods heated by ultrasound which confirm a dependence of the weight of the rods on their temperature.     

低发射率材料红外法向发射率谱测量方法的研究

采用热管技术研制了材料发射率谱的专用测量附件;利用双温测量技术,在P-E983型红外分光光度计及3600型数据站上进行了较低温度下低发射率材料红外法向发射率谱测量方法的研究.实测了几种材料的发射率谱;讨论了影响测量误差的诸因素.