软测量建模方法分析

介绍软测量技术的基本原理，论述了工业过程控制中常用的六种软测量建模方法及其优缺点，指出软测量技术与其它技术相结合，将会取得更广泛的应用。     

ANN valuation model of material LCIA profile

Weighting model is the only valuation model of life cycle impact assessment(LCIA) profile now. It simplifies evaluation function into linear function, and makes the determination of weighting factor complicated. Therefore the valuation of LCIA profile is the most critical and controversial step in life cycle assessment(LCA). Development on valuation models, which are understood easily and accepted widely, is urgently needed in the field of LCA.The modeling approaches for the linear evaluation function were summed up. The modeling approaches for the nonlinear evaluation function were set up by function approximation theory, which include choosing preference products, forming preference data, establishing artificial neural network(ANN) and training ANN by preference data.By selecting 7 material products as preference product, experience was done with modeling approaches of the nonlinear evaluation function. The results show that the modeling approaches and valuation model of the nonlinear evaluation function are more practical than the weighting model.     

关于中国加入WTO后影视高等教育体系的构想

关于中国加入WTO以后,如何适应新的形势和面对新的竞争,从而构建新的影视高等教育体系?本文从以下三个方面进行了论述:21世纪是彩色读图时代,影视知识技术是人才所必备的三大基本知识技术之一;中国的影视教育必须构建学历教育、职业技能教育和成人继续教育相结合的国民教育体系以及四合一的教育教学模式和产学研相结合的人才培养体制及其运行机制。     

Strength, strain-rate sensitivity and ductility of copper with nanoscale twins

We present a comprehensive computational analysis of the deformation of ultrafine crystalline pure Cu with nanoscale growth twins. This physically motivated model benefits from our experimental studies of the effects of the density of coherent nanotwins on the plastic deformation characteristics of Cu, and from post-deformation transmission electron microscopy investigations of dislocation structures in the twinned metal. The analysis accounts for high plastic anisotropy and rate sensitivity anisotropy by treating the twin boundary as an internal interface and allowing special slip geometry arrangements that involve soft and hard modes of deformation. This model correctly predicts the experimentally observed trends of the effects of twin density on flow strength, rate sensitivity of plastic flow and ductility, in addition to matching many of the quantitative details of plastic deformation reasonably well. The computational simulations also provide critical mechanistic insights into why the metal with nanoscale twins can provide the same level of yield strength, hardness and strain rate sensitivity as a nanostructured counterpart without twins (but of grain size comparable to the twin spacing of the twinned Cu). The analysis also offers some useful understanding of why the nanotwinned Cu with high strength does not lead to diminished ductility with structural refinement involving twins, whereas nanostructured Cu normally causes the ductility to be compromised at the expense of strength upon grain refinement.     

复合材料凝固过程中的颗粒/界面行为数学模型

根据颗粒增强金属基复合材料凝固过程中的颗粒 /界面作用微观机理 ,导出颗粒附近温度场 ,液 /固界面形状 ,颗粒受力情况及颗粒吞并 /推移临界条件数学模型。分析了热导率、颗粒尺寸和凝固速度不同对颗粒 /界面行为的影响。     

有限元模型转换及其在金属板料成形数值模拟中的应用

本文根据CAD和CAE软件各自的功能和特点 ,探讨了板料成形数值模拟中CAD模型向CAE模型转换的方法 ;并针对有限元分析软件ANSYS与ABAQUS的实际特点 ,编写了有限元模型转换接口程序 ,用实例验证了所编接口转换程序的可行性与正确性。     

新型硬齿面环面蜗杆传动研究

采用精确磨削TI蜗杆的砂轮，用类似直廓环面蜗杆或平面包络环面蜗杆的磨削方法加工环面蜗杆，使该蜗杆和齿面形状与砂轮曲面相同的蜗轮相配合，形成一种新型蜗杆传动，给出了这种传动蜗杆副齿面的数学模型，并通过计算机仿真得出了这种传动蜗轮齿面上接触线的形状及分布特征，初步分析了其啮合特点。     

Modeling of stress ratio effect on Al alloy SAE AMS 7475-T7351: Influence of loading direction

The main goal of this work was to evaluate the effectiveness of Walker’s equation in collapsing the fatigue crack propagation data of a SAE AMS 7475-T7351 aluminum alloy loaded either longitudinally (L-T) or transversely (T-L) to the rolling direction. T-L orientation testpieces presented lower ductility and fracture toughness values than L-T orientation. As a consequence, during the fatigue crack propagation tests, T-L testpieces exhibited a stronger influence of monotonic modes of fracture, resulting in higher Paris exponent values,m. Walker’s model was able to collapse fatigue crack propagation data of L-T test pieces at different applied stress ratios,R. However, for the T-L orientation, due to theR ratio dependency onm andC, simply averaging ofm values for the calculations of Walker’s exponent proved to be inefficient. A simple analytical procedure was proposed by the authors to modify Walker’s model to take into account such effect. For T-L test pieces, when Walker’s model is modified by considering both Paris’s exponent as well the coefficient as a function of theR ratio, the fatigue crack growth data collapses within a narrow band, thus allowing predictions to be made satisfactorily. The collapsed band is even narrower if the empirical relationm=a+blogC is used instead of simple polynomial equations due to a better correlation coefficient.     

机械加工工艺过程质量控制模型的研究

提出一种基于误差传递思想和灰色预测理论的质量控制的误差模型。在工艺设计中利用该模型合理制定工序公差可以提高工序的工艺能力，从而提高零件的成品合格率。在加工过程中利用误差模型预测6δ值变化并根据各工序的工艺能力的动态变化来适时地动态调整工序公差，以提高工艺过程成品合格率，从而为CIMS的质量控制提供一种手段。     

基于B/S模式的CAPP制造资源管理系统的实现

许多企业内部建有Internet／Intranet网来加强企业内部的信息集成和共享。顺应这一趋势，文章提出了基于B／S模式的CAPP制造资源管理系统，利用网络编程语言VBScript实现制造资源的共享。文章首先通过和C／S模式比较，概述了B／S模式的优势，并建立了适合于动态变化环境的制造资源模型。最后结合应用实例探讨了利用ASP、ADO、SQL和ODBC技术实现制造资源的远程知识查询的理论和方法。