Comparison of interfaces in Ti composites reinforced with uncoated and TiB2/C-coated SiC fibres

Interfaces play an important role in determining the mechanical properties of composite materials. The interfaces established between a titanium-alloy matrix (Ti-6Al-4V) and uncoated and TiB₂/C-coated SiC fibres are analysed by scanning electron microscopy, transmission electron microscopy and X-ray techniques. Emphasis is placed upon the interfacial morphology and microstructure, identification of reaction products, and the stability of the coating layer. Complex multi-reaction layers are observed frequently in the interfacial zones. Previous, often contradictory, reports about the interlayers are reviewed. Experimental observation demonstrates that the type and distribution of interlayers vary in a given system, due to prolonged treatment of the samples at temperature. The formation and distribution of the interlayers are discussed further, with respect to these and previous findings. Methods of reducing interfacial reactivity are discussed.     

Study on diffusion welding SiCp/ZL101 with Cu interlayer

Through the vacuum diffusion welding SiCp/ZL101 aluminum with Cu interlayer,the effect of welding parame-ter and the thickness of Cu on the welded joint property was investigated,and the optimal welding parameters were putforward at the same time.The microstructure of joint was analyzed by means of optical-microscope,scanning electron mi-croscope in order to study the relationship between the macro-properties of joint and the microstructure.The results showthat diffusion welding with Cu interlayer could be used for welding aluminum matrix composites SiCp/ZL101 successfully.     

The role of the surface free energy in the selection of a suitable excipient in the course of a wet-granulation method

Pellets containing metronidazole were produced in a centrifugal granulator, with hydroxypropylcellulose (Klucel LF®) as binding agent, and corn starch, microcrystalline cellulose (Vivapur 101®) and lactose as excipients. The wettability of the pharmaceutical powders was assessed by means of contact angle measurements, and the dispersive and polar surface energies were determined. The spreading coefficients, the work of adhesion and the work of cohesion were calculated and correlated with the pellet properties (friability, bulk and tapped density, and porosity). The aim was to investigate the role of the surface free energy of one- and two-component powder compositions in pellet production. The interactions between the particles were found to be connected with the measured pellet parameters. It was concluded that, in the course of the growth of the pellets, the particle sizes of the pharmaceutical powders and the interactions between them are important. If the work of cohesion of the binder is lower than the work of cohesion of the substrate and the work of adhesion, then the optimal amount of the binding agent is that which coats the particles uniformly in minimal quantity and in continuous layer.     

三箱式纺丝技术生产PET/PA6复合纤维

介绍了采用三箱式纺丝技术生产PET/PA6复合纤维的设备及工艺。重点对纺丝箱体、纺丝温度控制进行了详细的讨论。     

气化炉复合炉衬的传热计算

新型 (多喷嘴对置 )水煤浆气化炉拟采用水冷管和耐火浇铸料组成的复合炉衬结构 .炉内的高温高压对复合炉衬的高温侵蚀十分严重 ,是影响其寿命的重要因素 ,因此合理设计气化炉复合炉衬的结构对充分发挥其材质的作用具有十分重要的意义 .建立了气化炉复合炉衬的传热计算的数学模型 ,同时编制了模型求解的计算程序 ,并用某工艺条件对复合炉衬的温度分布进行了计算 .结果表明 ,该方法可有效计算出复合炉衬的温度分布情况 ,为复合炉衬的设计、运行和维护提供理论依据     

半刚性钢-混凝土组合节点受弯承载力的计算

在半刚性钢 -混凝土组合框架中 ,混凝土板中的纵向钢筋增加了节点的强度和刚度 ,但是 ,传统的设计方法往往忽略纵向钢筋的作用而采用简化的计算模型。因此 ,出于经济效益考虑 ,应该根据半刚性组合节点的实际受力性能建立更加准确的计算方法。这里详细介绍了考虑混凝土板纵向钢筋作用的半刚性组合节点受弯承载力的计算方法 ,计算结果表明 ,建议的公式与试验结果吻合良好 ,可供规范制定和工程应用参考。     

聚乙烯/石墨阻燃复合材料的研究

研究了石墨、可膨胀石墨、膨胀石墨 /聚乙烯复合材料的阻燃性能。结果表明 ,石墨具有一定的阻燃作用 ,可膨胀石墨具有良好的阻燃效果。但可膨胀石墨填充的复合材料力学性能较差     

SiC晶须对Si3N4陶瓷基复合材料机械强度的影响

制备了含10vol％,20vol％及30vol％SiC晶须的Si_3N_4基复合材料,对其室温及高温机械强度的测试研究表明,SiC晶须对基体的高温机械性能有明显的增强作用。含20vol％SiC晶须的复合材料1200℃下强度达780MPa,比基体材料提高50％。通过SEM和TEM研究,讨论了SiC晶须增强的原因。